Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
306 S16 Half Leathers - Blue, Powerflow Exhaust, GTi Boot Trim
#1
Set of S16 half leathers, blue fleck... In pretty good condition, there's a hole in the drivers bolster, but you can't see the yellow foam underneath, nothing like as bad as the usual GTi6 half leathers you normally see, and a scuff in the rear seats from something being placed on them...

I've noticed a few fag burn marks, they're not through the seats, just a little dimple, had to properly fiddle with the angle of the light to pick them up, but they are there. You can probably see the bolster wear, it's only on the seat base, the actual side bolster is perfect, bit of leather conditioner would bring it back, not ripped. The base is a bit ripped, but a bit of black cloth behind and you'd barely notice it. I've seen people pay good money for a lot worse!!!

£70 ONO - Darren is interested atm, so I'll make sure he doesn't want them first...

Any interest?

Postage probably isn't the easiest option... They're pretty large, pretty heavy and mostly I can't be arsed... But you can collect them from Gloucester, or if you're reasonably close and you give me a few quid for fuel (Come on... I'll probably be in the GTi....) and a cuppa at the other end, I'll consider dropping them off...

There's now also a 2 1/4" Stainless Powerflow exhaust, square tip on the end, looks pretty subtle, not horribly far off a stock tip - sounds great - even on standard turbo cars, it's not silly loud, but the backbox isn't that big, so doesn't remove the XUD9 raspyness on blow, I'd put it on mine if I didn't already have one I've modified to fit my car... This will fit any DT (probably HDi and Petrol too, but I seriously wouldn't recommend it on a petrol unless it's boosted) - all you need to do is chop your downpipe straight before the cat and it'll slide on - I did look at getting the downpipe off, but the nuts were shagged and I couldn't be arsed, it was only a stock downpipe... If you can get in there with a grinder, it means you don't have to undo the crappy Peugeot flanges with the springs and washers flying everywhere... Just sleeve on... £110 ono.. Sorry no postage, but I'm happy to drop off to anyone or you can come and pick it up.

GTi boot trim - not in the best of condition, but I've seen a lot worse, if it's not gone in the week it'll be going up the tip. £10.

[Image: img2671copyd.jpg]

[Image: img2673copy.jpg]

[Image: img2675copyw.jpg]

[Image: img2678copy.jpg]

[Image: img2679copyj.jpg]

[Image: img2682copy.jpg]

[Image: img2683copy.jpg]

[Image: img2684copyy.jpg]

[Image: img2686copyl.jpg]

[Image: img2688copyg.jpg]

Hopefully you can see what you're getting...

Ruan
(16-05-2016, 10:45 AM)Toms306 Wrote: Oh I don't care about the stripped threads lol, that's easily solved by hammering the bolt in. Wink
Nanstone GTD5 GT17S - XUD9TE
Volvo V50 D5 R-Design SE Sport - Daily cruise wagon.
Reply
Thanks given by:


Messages In This Thread
306 S16 Half Leathers - Blue, Powerflow Exhaust, GTi Boot Trim - by Ruan - 31-07-2012, 09:01 PM
RE: 306 S16 Half Leathers - Blue - by Matt - 31-07-2012, 09:21 PM
RE: 306 S16 Half Leathers - Blue - by Jackabeen - 31-07-2012, 10:22 PM
RE: 306 S16 Half Leathers - Blue - by darrenjlobb - 01-08-2012, 07:21 AM
RE: 306 S16 Half Leathers - Blue - by kernow_joe - 01-08-2012, 08:38 AM
RE: 306 S16 Half Leathers - Blue - by Ruan - 01-08-2012, 10:49 AM
RE: 306 S16 Half Leathers - Blue - by Connor - 01-08-2012, 03:27 PM
RE: 306 S16 Half Leathers - Blue - by Joe - 01-08-2012, 09:57 PM
RE: 306 S16 Half Leathers - Blue - by Niall - 01-08-2012, 10:07 PM
RE: 306 S16 Half Leathers - Blue - by Ruan - 19-08-2012, 03:22 PM

Possibly Related Threads…
Thread Author Replies Views Last Post
  GTi Boot Trim Dangti6 5 1,846 02-01-2017, 10:43 PM
Last Post: Eeyore
  FOR SALE: POWERFLOW exhaust system Piggy 3 1,807 19-06-2015, 11:45 PM
Last Post: Piggy
  half leathers & china pannels tsotd 0 847 01-06-2015, 05:01 PM
Last Post: tsotd

Forum Jump:


Users browsing this thread: 3 Guest(s)