306 HDi Clearout - Few Bits Added 20/06/2017

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
306 HDi Clearout - Few Bits Added 20/06/2017
#1
I've decided to clear out all my spares for the now crumpled/melted down 306 HDi. I amassed quite a spares collection over the few years I had it, with a mixture of used and new spares for either like-for-like replacement or improvement.

Here you go.....(I have pics of items so ask). Got loads more to go up!

New Pug Bonnet Switch for standard alarm -  £10
New Shitroen (Fiat/Alfa/Lancia) Mist Jets - £5

[Image: 20170620_192442_zpsignabkgy.jpg]

Passenger heated/electric wing mirror (Diablo) - £10
[Image: 20170516_184325_zpsawngclms.jpg]
Pair of front corner undertray trims (one has a pin broken off) - £5p
Spare wheel screw thing - £3
[Image: 20170514_194841_zpsia6o5vba.jpg]
2 x Silicon Pipes (both 45' bends, one 51mm both ends - Other 60 to 51mm reducer) & 1 x Ally Pipe 45' bend - £15 all three
[Image: 20170514_194918_zpsx4afvoyi.jpg]
3 x A/C Pipes (Front end ones - Condition unknown but did work on mine before removal) - £25
[Image: 20170514_194743_zpsleqqv6nm.jpg]
Used HDi Coolant tank/Switch/Cap - £5. £3
Used HDi Alternator (Condition unknown) - £10 £5
New HDi Kengst Fuel Filter - £5 £3
306 HDi Box (Condition unknown - no nasty noises though) - £50 £30 Collection only.
New 306 HDi SKF Shafts (VKJC6992 & 6993, Fit XU Petrols too) - £160 £140 Collection only
New HDi LP pump - £100 £70 £60
[Image: 20170422_171307_zpsmmtjuqvr.jpg]
New HDi Inlet Gasket 0348 N6 (between the elbow and inlet manifold) - £8 £1 each
New TRW JBJ709 BJs (One missing a bolt and washer - hole in bag!) - £20p £15p
[Image: 20170422_170953_zpsorhpq866.jpg]
Front door speaker covers - £5p £3
New HDi turbo inlet gasket - £3 
New Contitech HDi Drivebelt - £15 £8 £5
[Image: 20170422_170625_zpsoch006uv.jpg]
Door Mirror Interior Blanks - £5p £3p
New Nissens A/C pump (model 89055) - £100 £80
[Image: 20170422_165813_zpsmtma8fsk.jpg]
New B6 Bilstein rear shocks (boxed) - £150 £120
[Image: IMAG06281_zpsee02bmxl.jpg]

All parts located in Reading, Berkshire.
2001 BMW 330Ci
2012 VW High Up
1988 205 GTi 1.6
1990 205 Mi16
Reply
Thanks given by:
#2
what part number is on the B6's please Alan?
need a part number? http://public.servicebox.peugeot.com/ and http://service.citroen.com/ will sort you out.
Reply
Thanks given by:
#3
can you put aside for me these items?
Used HDi LP pump with float - £20
Used HDi HP pump - £20
New HDi Engine Cover fittings - £3
New HDi 1920 7L Fuel Pump Relay (Big Brown One) - £10
Used HDi TPS - £10
New Big and Small EGR blanking plates - £5p
i'm assuming the fuel pumps work ok. Smile

i'll be able to shlep over B/H weekend.
It goes, it stops (as reqd). Makeup
Hate Housework!
Reply
Thanks given by:
#4
(22-04-2017, 07:19 PM)welshpug Wrote: what part number is on the B6's please Alan?

24-020749 or B36-2074.

(22-04-2017, 07:22 PM)Magenta Sunset Wrote: can you put aside for me these items?
Used HDi LP pump with float - £20
Used HDi HP pump - £20
New HDi Engine Cover fittings - £3
New HDi 1920 7L Fuel Pump Relay (Big Brown One) - £10
Used HDi TPS - £10
New Big and Small EGR blanking plates - £5p
i'm assuming the fuel pumps work ok. Smile

i'll be able to shlep over B/H weekend.
 
Yep, with the undertray. I've never tried the pumps so cannot confirm. Bought them off here some time ago.
2001 BMW 330Ci
2012 VW High Up
1988 205 GTi 1.6
1990 205 Mi16
Reply
Thanks given by:
#5
(22-04-2017, 07:58 PM)Alan_M Wrote:
(22-04-2017, 07:19 PM)welshpug Wrote: what part number is on the B6's please Alan?

24-020749 or B36-2074.

(22-04-2017, 07:22 PM)Magenta Sunset Wrote: can you put aside for me these items?
Used HDi LP pump with float - £20
Used HDi HP pump - £20
New HDi Engine Cover fittings - £3
New HDi 1920 7L Fuel Pump Relay (Big Brown One) - £10
Used HDi TPS - £10
New Big and Small EGR blanking plates - £5p
i'm assuming the fuel pumps work ok. Smile

i'll be able to shlep over B/H weekend.
 
Yep, with the undertray. I've never tried the pumps so cannot confirm. Bought them off here some time ago.

thanks Alan.
It goes, it stops (as reqd). Makeup
Hate Housework!
Reply
Thanks given by:
#6
Will the A/C Condenser fit a gti6?
Reply
Thanks given by:
#7
I will also be jnterested in the ac condemsor and steering wheel if frosty doesnt have it.


Sent from my iPhone using Tapatalk
On a break from 306oc for personal reasons. If anyone needs or wants me most of you have my number and or facebook messenger
Thanks for the good times guys n gals. I might be back. Who knows.
Reply
Thanks given by:
#8
Condenser is for HDi only. Slight size difference between them.
2001 BMW 330Ci
2012 VW High Up
1988 205 GTi 1.6
1990 205 Mi16
Reply
Thanks given by:
#9
Yaahhh i need a hdi one. Drop me a message please Smile will get back to you today.


Sent from my iPhone using Tapatalk
On a break from 306oc for personal reasons. If anyone needs or wants me most of you have my number and or facebook messenger
Thanks for the good times guys n gals. I might be back. Who knows.
Reply
Thanks given by:
#10
Any pictures of fmic pipework/the cooler it's self?



Reply
Thanks given by:
#11
I've changed some prices as I found some receipts for parts.
2001 BMW 330Ci
2012 VW High Up
1988 205 GTi 1.6
1990 205 Mi16
Reply
Thanks given by:
#12
(23-04-2017, 09:11 AM)Alan_M Wrote: Condenser is for HDi only. Slight size difference between them.

Ah thats me out then. Any idea what the differences are? Also is some of the pipe work different as well then? Just trying to get the bits to put it back on the gti6 i got but im taking the pipe work off HDi's that i have breaking
Reply
Thanks given by:
#13
Prepared to split the IC setup - i'm after 2inch pipework - no an entire setup
Diablo Hdi Dturbo and 205 1.9 project - it lives!
Reply
Thanks given by:
#14
(23-04-2017, 03:25 PM)Frosty Wrote:
(23-04-2017, 09:11 AM)Alan_M Wrote: Condenser is for HDi only. Slight size difference between them.

Ah thats me out then. Any idea what the differences are? Also is some of the pipe work different as well then? Just trying to get the bits to put it back on the gti6 i got but im taking the pipe work off HDi's that i have breaking

HDi one is wider (94321). GTi6 one is 94313. Connections look slightly different too.

http://webshop.nissens.com/GeneratedPDF/.../94321.pdf

http://webshop.nissens.com/GeneratedPDF/.../94313.pdf
2001 BMW 330Ci
2012 VW High Up
1988 205 GTi 1.6
1990 205 Mi16
Reply
Thanks given by:
#15
(23-04-2017, 03:44 PM)Alan_M Wrote:
(23-04-2017, 03:25 PM)Frosty Wrote:
(23-04-2017, 09:11 AM)Alan_M Wrote: Condenser is for HDi only. Slight size difference between them.

Ah thats me out then. Any idea what the differences are? Also is some of the pipe work different as well then? Just trying to get the bits to put it back on the gti6 i got but im taking the pipe work off HDi's that i have breaking

HDi one is wider (94321). GTi6 one is 94313. Connections look slightly different too.

http://webshop.nissens.com/GeneratedPDF/.../94321.pdf

http://webshop.nissens.com/GeneratedPDF/.../94313.pdf

Ok cheers. Could be interested in the refurbed injectors. Any more info on them? What was replaced when they where refurbed? How long ago where they done?
Reply
Thanks given by:
#16
(23-04-2017, 04:00 PM)Frosty Wrote:
(23-04-2017, 03:44 PM)Alan_M Wrote:
(23-04-2017, 03:25 PM)Frosty Wrote:
(23-04-2017, 09:11 AM)Alan_M Wrote: Condenser is for HDi only. Slight size difference between them.

Ah thats me out then. Any idea what the differences are? Also is some of the pipe work different as well then? Just trying to get the bits to put it back on the gti6 i got but im taking the pipe work off HDi's that i have breaking

HDi one is wider (94321). GTi6 one is 94313. Connections look slightly different too.

http://webshop.nissens.com/GeneratedPDF/.../94321.pdf

http://webshop.nissens.com/GeneratedPDF/.../94313.pdf

Ok cheers. Could be interested in the refurbed injectors. Any more info on them? What was replaced when they where refurbed? How long ago where they done?

The injectors were refurbed by Diesel Bob. One was rebuilt (seperate bag) and the other three were re-nozzled & balanced. Work was done a while ago, January 2014. Time flies!
2001 BMW 330Ci
2012 VW High Up
1988 205 GTi 1.6
1990 205 Mi16
Reply
Thanks given by:
#17
any pics of the gauge pod and gauge?
Given the choice between Niall and the sheep. I would choose the sheep!
/Toseland
Reply
Thanks given by:
#18
Pm'd Smile
Peugeot 206 GTI HDI
Volvo V50 2.0d
Volvo XC90 D5







Reply
Thanks given by:
#19
(28-04-2017, 05:33 PM)Anton Wrote: Pm'd Smile

Replied.
2001 BMW 330Ci
2012 VW High Up
1988 205 GTi 1.6
1990 205 Mi16
Reply
Thanks given by:
#20
More bits gone, list edited.
2001 BMW 330Ci
2012 VW High Up
1988 205 GTi 1.6
1990 205 Mi16
Reply
Thanks given by:
#21
Put me down for second in line for the eco box if anton doesn't have it. And I'll take be pillar pod either way
Reply
Thanks given by:
#22
(01-05-2017, 06:24 PM)eskimogod Wrote: Put me down for second in line for the eco box if anton doesn't have it. And I'll take be pillar pod either way

Ok, I'll let you know by this Friday. Pillar pod is yours.
2001 BMW 330Ci
2012 VW High Up
1988 205 GTi 1.6
1990 205 Mi16
Reply
Thanks given by:
#23
If sale falls through ill take the pillar pod RGM MRB129
Reply
Thanks given by:
#24
Just to let people know i bought a few bits off alan for the first time. All arrived in very good time and great condition. Top man.


Sent from my iPhone using Tapatalk
On a break from 306oc for personal reasons. If anyone needs or wants me most of you have my number and or facebook messenger
Thanks for the good times guys n gals. I might be back. Who knows.
Reply
Thanks given by:
#25
(04-05-2017, 10:12 PM)bashbarnard Wrote: Just to let people know i bought a few bits off alan for the first time. All arrived in very good time and great condition. Top man.


Sent from my iPhone using Tapatalk

Thanks Bash.

Got loads more to go up so keep an eye out!
2001 BMW 330Ci
2012 VW High Up
1988 205 GTi 1.6
1990 205 Mi16
Reply
Thanks given by:
#26
(04-05-2017, 10:12 PM)bashbarnard Wrote: Just to let people know i bought a few bits off alan for the first time. All arrived in very good time and great condition. Top man.


Sent from my iPhone using Tapatalk

+1 to this!
[Image: Ty8kl7b.jpg]
Reply
Thanks given by:
#27
(05-05-2017, 10:10 AM)Midnightclub Wrote:
(04-05-2017, 10:12 PM)bashbarnard Wrote: Just to let people know i bought a few bits off alan for the first time. All arrived in very good time and great condition. Top man.


Sent from my iPhone using Tapatalk

+1 to this!

and again!
It goes, it stops (as reqd). Makeup
Hate Housework!
Reply
Thanks given by:
#28
Thanks lads and lasses.
2001 BMW 330Ci
2012 VW High Up
1988 205 GTi 1.6
1990 205 Mi16
Reply
Thanks given by:
#29
(01-05-2017, 06:24 PM)eskimogod Wrote: Put me down for second in line for the eco box if anton doesn't have it. And I'll take be pillar pod either way

Anton has been and gone with box I'm afraid. Pillar pod still here though.
2001 BMW 330Ci
2012 VW High Up
1988 205 GTi 1.6
1990 205 Mi16
Reply
Thanks given by:
#30
Cool no worries chuck me a pm how you want payment please
Reply
Thanks given by:


Possibly Related Threads…
Thread Author Replies Views Last Post
  306 Part Clearout - Some free to collector - Diablo Trim Added Alan_M 8 3,702 02-02-2019, 10:02 AM
Last Post: hovis16
  306 Parts Clearout, suspension bits bobs + others tigerstyle 4 2,486 19-08-2017, 08:22 PM
Last Post: Frosty
  FOR SALE: Clearout - or scrapped! turbo, XUD/'6 bits, springs, p.bush ginge191 28 11,379 02-06-2015, 08:16 PM
Last Post: ginge191

Forum Jump:


Users browsing this thread: 1 Guest(s)