106 Track Toy

[Nathan1305]

Whenever I was on the stand ( grass car park lol ) I could only find your car not you.Although I briefly saw you on track when passed you on the straight before tower corner.

Yeah I was just roaming around haha only really seen Pebbles. Absolutely loved it on track. Just need something quicker that won't cut out all the time haha

[procta]

Nathan it would be a shame to bin this off, you can do a engine change, if I can do a engine conversion. Me and my dad did the full build on a ground that is full of dolomite, took us about two days, as we were both at work.
I did the prep work, ( remove what had to be removed) Then we went for the full smash, took one out, next day dropped the other one in, then the rest of the week to put the car back together again.

[Nathan1305]

Nathan it would be a shame to bin this off, you can do a engine change, if I can do a engine conversion. Me and my dad did the full build on a ground that is full of dolomite, took us about two days, as we were both at work.  
I did the prep work, ( remove what had to be removed) Then we went for the full smash, took one out, next day dropped the other one in, then the rest of the week to put the car back together again.

Don't have access to a Crain or a driveway :/ just have some grass the cars parked on 

[procta]

Nathan it would be a shame to bin this off, you can do a engine change, if I can do a engine conversion. Me and my dad did the full build on a ground that is full of dolomite, took us about two days, as we were both at work.  
I did the prep work, ( remove what had to be removed) Then we went for the full smash, took one out, next day dropped the other one in, then the rest of the week to put the car back together again.

Don't have access to a Crain or a driveway :/ just have some grass the cars parked on 

me and my dad didn't use a crane, we did used a couple of jacks, to wheel the full front subframe out, our land where we were working was just as soft as grass tbh, you can hire engine hoists for sake of a few quid.  

[Nathan1305]

Nathan it would be a shame to bin this off, you can do a engine change, if I can do a engine conversion. Me and my dad did the full build on a ground that is full of dolomite, took us about two days, as we were both at work.  
I did the prep work, ( remove what had to be removed) Then we went for the full smash, took one out, next day dropped the other one in, then the rest of the week to put the car back together again.

Don't have access to a Crain or a driveway :/ just have some grass the cars parked on 

me and my dad didn't use a crane, we did used a couple of jacks, to wheel the full front subframe out, our land where we were working was just as soft as grass tbh, you can hire engine hoists for sake of a few quid.  

Just don't think I could do an engine swap by myself. Was planning on getting a GTi anyway and have the opportunity in the next few months 

[Dum-Dum]

Keep the 1.4 as it's cheap tax.

The car is probably light enough to take a Hayabusa lump that weighs half what your engine does, makes the best part of 200bhp and has a 6 speed sequential box.

If that's not enough power then you can supercharge them.

[Nathan1305]

Keep the 1.4 as it's cheap tax.

The car is probably light enough to take a Hayabusa lump that weighs half what your engine does, makes the best part of 200bhp and has a 6 speed sequential box.

If that's not enough power then you can supercharge them.

It's a 1.6 8v mate  and don't need to tax it as it's just track so will be trailered 

[Stef205]

got a crane here if you want to borrow it?

[kentiiboii]

Keep the 1.4 as it's cheap tax.

The car is probably light enough to take a Hayabusa lump that weighs half what your engine does, makes the best part of 200bhp and has a 6 speed sequential box.

If that's not enough power then you can supercharge them.

That's actually a good idea!

[Toms306]

Yeah I can imagine he'd be able to insure that for under £5k as well...

[Nathan1305]

Engine is over £2000 alone, I'm going to get a GTi  already started saving

[procta]

just to throw the spanner in the works, why don't you go Bmw, get the one you always liked.

[Nathan1305]

just to throw the spanner in the works, why don't you go Bmw, get the one you always liked.

After something small and light for track

[Nathan1305]

Should be picking this bad boy up in a couple of months

106 GTi
Welded half cage 
Gaz Coilovers 
C5 alloy/steelies with new toyo tires (changing colour)
Pugsport system
GTi6 brakes
Quick shift
Bucket seats
New beam (will put my new one on from Stef and keep the one on the car as a spare)
New clutch
4 point harnesses 

What do you guys think? I really like it

[attachment=22975]

---

[attachment=22976]

---

[attachment=22977]

---

[attachment=22978]

---

[attachment=22979]

---

[attachment=22980]

[Dum-Dum]

Awesome!!

Defo needs sensible wheel colour.

[Nathan1305]

Awesome!!

Defo needs sensible wheel colour.

I love it  really got a thing for sundance yellow. Yeah I was thinking either black or white for the wheel colour 

[procta]

I still say its a shame you are changing cars, after all the work you have done with this one.

[Nathan1305]

I still say its a shame you are changing cars, after all the work you have done with this one.

Yeah I know it's a shame mate but onwords and upwards  at least it's being replaced with I quicker, better car 

[Toms306]

Niiiice!

Wheels need to be lairy not sensible, its a track car ffs!

[Nathan1305]

Niiiice!

Wheels need to be lairy not sensible, its a track car ffs!

Glad you guys approve  and I know haha but I'm not a huge fan of the colour. Will probably do them black. Black wheels on sundance looks amazing

[Stef205]

move those harness mountings first, if you want a harness bar welded in i can help out if needed.

[Nathan1305]

move those harness mountings first, if you want a harness bar welded in i can help out if needed.

Yeah that would be awesome mate thank you

[Stef205]

measure up and get your self some 38mm cds tubing. i think it should be 38mm

[Nathan1305]

measure up and get your self some 38mm cds tubing. i think it should be 38mm

Yeah I'm going to view it next Sunday so I'll measure it up  

[Stef205]

check the rear arches, inner boot floor as they love going there!

[Nathan1305]

check the rear arches, inner boot floor as they love going there!

Will do mate will give it a good going over

[Stef205]

i spent a good few days welding the gf's up and fitting a new axle at the same time a few years ago.

[Nathan1305]

i spent a good few days welding the gf's up and fitting a new axle at the same time a few years ago.

Looks like you did a good job! Luckily it's mostly stripped so should be easier to spot rust

[7057sam]

Looks epic

How come you have to wait a few months ??

Take it you won't have it for fcs??

[Eeyore]

Looks epic

How come you have to wait a few months ??

Take it you won't have it for fcs??

yeh why do you have to wait a few months? D: