106 Track Toy

[Nathan1305]

all depends on what stuff you use, as you do get some strong panel glues that body shops use now.

Probably just pop rivet them and when I eventually get poly windows I'll bond some new door cards in 

[procta]

As for the boot, id leave it as it is. As you may want to be in there to put your wheels in the boot. Some racers I have seen have left theirs a lone, and fitted pins for the regs. But it all depends on how far you are going to go with this.
As you could buy little rubber grommets and fill in the holes. In side the car.

[Nathan1305]

As for the boot, id leave it as it is. As you may want to be in there to put your wheels in the boot. Some racers I have seen have left theirs a lone, and fitted pins for the regs. But it all depends on how far you are going to go with this.
As you could buy little rubber grommets and fill in the holes. In side the car.

Gonna leave a single ram in there just about holds it up  need to get another set of 14" wheels for the track tyres 

[procta]

As for the boot, id leave it as it is. As you may want to be in there to put your wheels in the boot. Some racers I have seen have left theirs a lone, and fitted pins for the regs. But it all depends on how far you are going to go with this.
As you could buy little rubber grommets and fill in the holes. In side the car.

Gonna leave a single ram in there just about holds it up  need to get another set of 14" wheels for the track tyres 

easy that one, get your self down to the local scrappy and get your self a set.

[Nathan1305]

As for the boot, id leave it as it is. As you may want to be in there to put your wheels in the boot. Some racers I have seen have left theirs a lone, and fitted pins for the regs. But it all depends on how far you are going to go with this.
As you could buy little rubber grommets and fill in the holes. In side the car.

Gonna leave a single ram in there just about holds it up  need to get another set of 14" wheels for the track tyres 

easy that one, get your self down to the local scrappy and get your self a set.

Don't think there's any decent scrap yards in Bristol any more 

[procta]

As for the boot, id leave it as it is. As you may want to be in there to put your wheels in the boot. Some racers I have seen have left theirs a lone, and fitted pins for the regs. But it all depends on how far you are going to go with this.
As you could buy little rubber grommets and fill in the holes. In side the car.

Gonna leave a single ram in there just about holds it up  need to get another set of 14" wheels for the track tyres 

easy that one, get your self down to the local scrappy and get your self a set.

Don't think there's any decent scrap yards in Bristol any more 

ebay will be your best bet, give the breaker a email and ask. they could even do you a discount on a second set too. 

[Nathan1305]

As for the boot, id leave it as it is. As you may want to be in there to put your wheels in the boot. Some racers I have seen have left theirs a lone, and fitted pins for the regs. But it all depends on how far you are going to go with this.
As you could buy little rubber grommets and fill in the holes. In side the car.

Gonna leave a single ram in there just about holds it up  need to get another set of 14" wheels for the track tyres 

easy that one, get your self down to the local scrappy and get your self a set.

Don't think there's any decent scrap yards in Bristol any more 

ebay will be your best bet, give the breaker a email and ask. they could even do you a discount on a second set too. 

I'll have to mail a few  want some 106 xsi wheels for it. 

[procta]

what about a set of steelies? just to sit the car on?

[Nathan1305]

what about a set of steelies? just to sit the car on?

Could come in handy when it's parked up actually. That way I can have the raptors and a set of xsi wheels for track tyres

[Stef205]

aahheemm why is that axle not on yet?

[Nathan1305]

aahheemm why is that axle not on yet?

I'm dying to put it on need a rear brake setup and some front lowering springs

[Dum-Dum]

For securing the door cards rivets will be the lightest and cheapest but self tapping metal screws like I used on my GTi6 is the easiest if you ever need to get behind it.

[Nathan1305]

For securing the door cards rivets will be the lightest and cheapest but self tapping metal screws like I used on my GTi6  is the easiest if you ever need to get behind it.

Yeah I ordered some rivets on eBay  got a decent rivet gun here so will secure it that way. Hope they get delivered soon. Can't wait to get them on.

Brakes are next then suspension and seats. 

[Nathan1305]

[attachment=22125]

Got some black pop rivets should look a little different  get the door cards mounted tomorrow

[Nathan1305]

[attachment=22478]
Got the door cards done today  pretty happy with them for my first attempt. Can't wait to get it on track

[procta]

looking bob on there!

[Nathan1305]

looking bob on there!

What's looking Bob? Haha

[Nathan1305]

Fitted the enclosure thing today, hope it gives it a little cooler air

[attachment=22585]

---

Stripping the car has made it super high haha, it's defying gravity
[attachment=22586]

[Eeyore]

get it lowered! D:

[7057sam]

Door cards looking good

Are you in this at action day in a few weeks?

[Nathan1305]

get it lowered! D:

Seriously needs it! Not sure how low I should go on the front

Door cards looking good

Are you in this at action day in a few weeks?

Thanks man, yeah I'll be at Action day

[Stef205]

Is that with the new axle on?

[Nathan1305]

Is that with the new axle on?

Not yet, need front lowering springs first. Think I'm gonna get 60mm lowering springs to hopefully match the back 

[Nathan1305]

So buying lowering springs today but undecided weather to go 50mm or 60mm lower. Now it's stripped it's sitting very high. I measured the gap between the arch and tyre and it's around 90mm so what springs would you put on it? 

[Dum-Dum]

I suppose it depends how low you want it.

Have you considered coilovers?

[Nathan1305]

I suppose it depends how low you want it.

Have you considered coilovers?

Bit pricey at the moment thinking of dropping it about 50mm when I get a cage it will add a bit of weight so will drop the suspension slightly 

[Dum-Dum]

Cage is only about 25kg though mate, put 25kg of weight on the back seats and see how much it changes (2 alloys with tyres will be close to 25kg)

Personally I'd be going for the 60mm

[Nathan1305]

Cage is only about 25kg though mate, put 25kg of weight on the back seats and see how much it changes (2 alloys with tyres will be close to 25kg)

Personally I'd be going for the 60mm

Good point, I'll get 60mm apex springs 

[Poodle]

I bought half-decent coilies needing a refurb for £180, refurbed them for about £80. So that's £260, a half-decent shock and spring set will cost you more than that new...

[Nathan1305]

I bought half-decent coilies needing a refurb for £180, refurbed them for about £80. So that's £260, a half-decent shock and spring set will cost you more than that new...

Gone for just springs for now then I can develope it more over time. Hoping to get it all fitted for FCS. Need 266mm brakes and rear disk setup