Timing tool pin set

[mossy1985]

I'm looking to do a Cambelt/water pump change on my 6 and was wondering if anyone could provide me with either a link to a set of timing pins I will need or, provide me with maybe drill bit sizes? Ie cams need 6mm bit to lock in for eg

Thanks all

Dave

[cully]

i made my pins from
2x 6mm shouldered bolts with the threads cut off
1x 9mm ish pin punch filed/sanded down to the correct size using a drill to spin it to keep it round
camshaft locking tool made out of 20mm ply
now i can lock the centre bolts to there correct torque without stressing the locking pins


[attachment=19906]
[attachment=19907]

[mossy1985]

Nicely done there cully very impressive, how did you make your camshaft locking block?

[cully]

scribed two arks the same diameter and distance apart as the cam pulleys with a compas, cut it out with a jigsaw drilled the hole, then cut the section out in the centre

[af1]

Cully has done it right!!!

[mossy1985]

I think cully should make a set and sell them to me ..................