Posts: 1,204
Threads: 195
Joined: Jul 2013
Reputation:
6
Location: Wolverhampton
Car Model/Spec: 2000 Xs 1.8 16v
Hi all this is getting worse since I first noticed it the other day.
When pulling away or changing gear into low rpm I get a big wobble from the gear stick and through every pedal? Got to the stage I don't want to drive the car.
I checked the stabiliser mount which seemed new. Could it be the other two?
Posts: 10,864
Threads: 117
Joined: Dec 2011
Reputation:
119
Location: Southampton
Car Model/Spec: 306 HDi and friends
Yeah, will most likely be the top mount if your bottom mount is fine.
Posts: 18,242
Threads: 386
Joined: Dec 2011
Reputation:
87
Location: Suffolk
Car Model/Spec: Focus Titanium
16-02-2014, 09:23 PM
(This post was last modified: 16-02-2014, 09:23 PM by Toms306.)
Check that the top engine mount cup hasn't cracked.
Posts: 33
Threads: 5
Joined: Feb 2014
Same symptoms I got when the top cam belt side mount ripped out on my p1 dt ...quick weld and all was good again
Posts: 1,058
Threads: 18
Joined: Jan 2014
Reputation:
10
Location: Wiltshire
Car Model/Spec: 3 x 205 GTi & 306 HDi
Wobbling/vibration under load can be a sign that the driveshaft inner CV's are dying, although that's usually worse under load and at higher speeds in my experience. If the engine mounts look OK it's worth checking out.
1990 Peugeot 205 GTi 1.9 // 1991 Peugeot 205 GTi 1.9 16v // 1992 Peugeot 205 GTi 1.9 // 1999 Peugeot 306 HDi Estate
Doesn't look to hard to take off?
