Fitting Decat Pipe 306 HDI

[boggs]

Do I need a fitting kit to fit this decat or can I use the original fitting kit and donut gasket ring etc? I know a new gasket donut ring would be advisable but in other words will it be a straight fit without anything else this is the decat I have bought:

http://www.ebay.co.uk/itm/Peugeot-306-2-...43c1b26415

And this is the fitting kit I have been looking at: http://www.ebay.co.uk/itm/FK80084B-Peuge...43aad716bd

Is this the one I need or do I even need it?

[vlj]

Its better just to buy the fitting kit, 9 times out of 10 the bolts are gonna be seized and you won't be able to reuse them. I was very lucky on my hdi at 173k, nothing seized..
For your own peace of mind, just get it

[boggs]

Its better just to buy the fitting kit, 9 times out of 10 the bolts are gonna be seized and you won't be able to reuse them. I was very lucky on my hdi at 173k, nothing seized..
For your own peace of mind, just get it

Thanks for the reply suppose it would make it easier too, could just grind the old bolts off, is the one that I have posted a link to the correct fitting kit?

[itone24]

I was looking at decats today for my hdi, saw one on ebay for £49, looked the same as the one in your link, might be worth a look to save a few quid mate

[titch]

Yeah the same company do a mild steel one for 49 quid, the more expensive one is stainless.


http://www.ebay.co.uk/itm/Peugeot-306-2-...43c1bbf9b1

I have just fitted one to mine, i got the new fitting kit, so i had the new wire ring gasket as the old one when it came off was trashed! i was going to replace that as a matter of course, and i had the new studs just in case i snapped one but luckily i didn't, you can get the fitting kit from The pug dealer iirc it was about 12 quid.

Can't believe what a difference it made to the car, mine has a stage one map and it goes so much better revs a lot more freely and smokes less to.

[itone24]

Its well worth doing, can it be done on its own or is better to get the remap done first before changing the air filter and exhaust?

[Eeyore]

decat makes such a difference. Cost £29 to fit it at my local place. Took 30 minutes and saved me the hassle.

[itone24]

Thanks for the info! Might have to look at decat pipes this weekend!

[Jonny81191]

Really need to decat the 40-bus, maybe it'll be faster than Vaughan's picasso then!

[vlj]

Really need to decat the 40-bus, maybe it'll be faster than Vaughan's picasso then!

In your dreams.

[Jonny81191]

Really need to decat the 40-bus, maybe it'll be faster than Vaughan's picasso then!

In your dreams.

Hey, we were level pegging it and yours is mapped!

[vlj]

Really need to decat the 40-bus, maybe it'll be faster than Vaughan's picasso then!

In your dreams.

Hey, we were level pegging it and yours is mapped!

I think that shows just how little hope that thing has. It was genuinely painful to drive beforehand

[Jonny81191]

The thing is, both are CHRONICALLY slow at the end of the day