23-09-2013, 12:53 PM
I'm so happy to NOT see JOEY ending up at the scrap heap.. Thanks for keeping it alive
Joey the VNT boosted 205!
|
23-09-2013, 12:53 PM
I'm so happy to NOT see JOEY ending up at the scrap heap.. Thanks for keeping it alive
23-09-2013, 06:32 PM
(23-09-2013, 12:53 PM)thefastest1 Wrote: I'm so happy to NOT see JOEY ending up at the scrap heap.. Thanks for keeping it alive Cheers man appreciate that! If someone scrapped a 205 in this good condition they would be maaaad! But yeah today i realised how painful the dual carriage way is in this! Really low ratio box lol Then i finally got fed up with the temp gauge flying across the dash every roundabout so i cut a hole O: Also got a new door pin for the drivers side so the light comes on when i get in. Little things ay
Doesnt even own a 306.
23-09-2013, 06:49 PM
What gearbox has it got?
what temp is that reading?!
and that is a short ratio....that in 5th at 50?! Looking ACE by the way Wishes for more power...
23-09-2013, 07:30 PM
(This post was last modified: 23-09-2013, 07:30 PM by Pugmarshall.)
I sacked that box off, I used to keep checking it was in 5th all the time!
Get a 1.9 box on!
23-09-2013, 08:31 PM
I always planned to fit it there Tom but never got round to it.
It's a 1.9 306 box but the small wheels and tyres brings the ratio down, a lot.
Stage 2 XUD Sedan
23-09-2013, 10:20 PM
The temp probe is just in the bay atm, need to mount it in the inlet where it gets a good passing of air so i know my charge temps but i figured without a cooler i dont even want to know
Doesnt even own a 306.
23-09-2013, 11:34 PM
The temp display isn't straight!
But otherwise, looks really good....and I don't normally like 205s lol!
24-09-2013, 09:08 AM
IMO.. get a HDi box on there.. the longer ratios with the lack of weight will make it fly!
24-09-2013, 11:59 AM
(24-09-2013, 11:30 AM)Poodle Wrote:(23-09-2013, 08:31 PM)strictly_derv Wrote: I always planned to fit it there Tom but never got round to it. Depends which speedo drive he is using... Id say if its really a short a hdi box would probs suit it more as it will return it to a more normal ratio..that said...I run a '6 box so cant really talk, short ratio FTW | Dyno Power Runs & Steady State Facilities Available, Just Ask Anytime |
| #DervMafia |
24-09-2013, 01:19 PM
sat nav to get a rough guide? My 206 was 10mph out using the xantia gearbox speedo drive....went and helped myself down darrens scrap pile for an XUD one.
24-09-2013, 01:50 PM
Its a 306 one and on the sat nav it actually reads slower.
Stage 2 XUD Sedan
24-09-2013, 02:24 PM
(24-09-2013, 01:19 PM)mr_fish Wrote: sat nav to get a rough guide? My 206 was 10mph out using the xantia gearbox speedo drive....went and helped myself down darrens scrap pile for an XUD one. Darrens scrap pile is rather epic, i remember seeing it years ago before he had a tidy up, back when i first met him, there was a turbo "pile" and another wiring pile! Never seen so many spares!
Doesnt even own a 306.
24-09-2013, 03:16 PM
(24-09-2013, 02:24 PM)Tom Wrote:(24-09-2013, 01:19 PM)mr_fish Wrote: sat nav to get a rough guide? My 206 was 10mph out using the xantia gearbox speedo drive....went and helped myself down darrens scrap pile for an XUD one. I think that each time i've been down there I've gone over and routed through the mixture of tired/blown/robbed/destroyed engines and gearboxes. One day I'm going to be disappointed when they're all sent to the scrapyard in the sky
25-09-2013, 05:37 PM
Getting on a 4 poster on friday to get an exhaust on this bugger! Oh yay
Doesnt even own a 306.
25-09-2013, 05:44 PM
Midnightclub Wrote:All the cool kids have ph 2 Nile 6's!
25-09-2013, 06:59 PM
It is epic but the noise is boring me a bit! Cant hear the turbo
Doesnt even own a 306.
Weld yourself something up out of scrap blagged from the local garage, it's what i'm doing. 2.5" straight through with twin-exit box for cost of half a can of gas and a few metres of reel? Yes please.
(24-09-2013, 11:59 AM)darrenjlobb Wrote: Depends which speedo drive he is using... Oh yeah, fair point. (24-09-2013, 01:50 PM)strictly_derv Wrote: Its a 306 one and on the sat nav it actually reads slower. Oh that's normal lol, indicated 80 in the hdi is actually just over 70.
25-09-2013, 09:22 PM
If i had a mig i would weld one myself but i dont so have the luxury of paying someone else to, but i am fotunate to have alot of friends in the trade so it should only cost me a cake i steal from work and a few quid
Doesnt even own a 306.
28-09-2013, 08:41 PM
God I miss this car.
I really think a cheeky up/side swept exhaust would look good Tom
Stage 2 XUD Sedan
28-09-2013, 10:32 PM
So good to see this back on the road and still on this forum.
29-09-2013, 06:57 AM
think just a straight pipe with a 2/3 inch outward rolled tip something not ott
Still alive, had a wash the other day, my drive is pretty cramped so i park real close to the house and it doesnt leave much room for pics!
Have an update on the way aswell, next few days Awesome stuff.
Doesnt even own a 306.
12-10-2013, 04:01 PM
Ah so you have Joey, just realised Tom
Have you posted the Bosch kit yet? the smokey old bus that sounds like a tractor... |
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
Project "KEV"....boosted Mini | Piggy | 59 | 20,825 |
24-04-2018, 12:58 PM Last Post: Magenta Sunset |
|
The boosted 205 rat - pictures and video added (25.09.16) | ginge191 | 134 | 64,857 |
21-04-2017, 10:46 AM Last Post: ginge191 |