The time has come to part ways with my much loved 306, owned for almost 2 years and has been a great little runaround, quick, reliable and economical. Had lots done to this car with lots of money spent, it has been well looked after.
Details:
- 115,000miles (Body), 85,000 miles (DHX Engine).
- T Reg, 1.9 Xantia engine.
- MOT Sept '13
- Tax 6 Months
- Lincolnshire
Good Bits
TURBO - T25/T2 hybrid turbo custom built and precision dynamically balanced, fitted with 360 degree thrust bearing for reliable high levels of boost. Relatively low lag for good driveability with good power, currently holding at ~24psi.
BOSCH PUMP - Gov mod, shimmed ~6mm, ground LDA etc. Currently in 'low fuel' tune, still boosts to 24psi and pulls well but no smoke.
Black Powdercoated Cyclones - Perfect condition with almost new Uniroyal Rainexpert Tyres.
Ph3 crystal headlights with black masks.
Leather Bonnet Bra
POWERFLEX BITS - Full wishbone bushes and lower engine mount.
Coilovers - Adjustable, lowered ~ 80mm on front, lowered rear to match.
Large FMIC with 2.5" pipework, Xantia manifold and Mikalor Clamps.
Full SS Straight through exhaust with gutted Scorpion '6 box.
Semi-stripped interior - Soundproofing and carpets gone.
Boost gauge plumbed in and working, water temp, oil temp and oil pressure gauge installed with senders and sandwich plate, just need wiring in (will get pics).
Sony X-plod CD player with Juice 250W (i think) 6x9 speakers in parcel shelf.
De-badged and tinted rears.
De-wipered boot.
Bad Bits
Large Scratch in front wing.
Could do with new glowplugs.
Front bumper could use some attention.
Dint in bonnet (Covered by bra)
Looking for £800, though bits can be negotiated e.g. I have the original wheels so I could put these back on and sell a bit cheaper if asked.
Other Bits (I havent had time to finish) can be negotiated seperately
- Ph3 smoother front bumper ready for paint.
- GTI 6 Front calipers.
- HDI Rear Disc beam
- Original 14" alloys
- Original Struts with -60mm lowering springs.
- Original Exhaust (free to good home)
Feel free to PM me for info on anything listed or to arrange viewing.
Cheers,
Jim