Posts: 2,526
Threads: 143
Joined: Dec 2011
Reputation:
10
Location: South East London
Car Model/Spec: Ph3 XUD
Thanks: 1
Given 8 thank(s) in 8 post(s)
03-01-2013, 02:21 PM
(This post was last modified: 23-02-2013, 05:20 PM by bigcheez2k3.)
Update 23/2/13
Everything is out the car now, here's what is available: (anything not here just ask might have it)
Bodywork available, Dragoon Blue KNP
All glass except windscreen
Electric sunroof, complete unit
Spoiler
Seatbelts
Door/window/tailgate seals
Passenger/short driveshaft
Pair of wishbones, 18mm. One balljoint is slightly looser than the other but should be fine
Drivers hub with ABS sensor 18mm
Ph2 DT clocks ~137k
Steering rack
ABS modulator unit
DT Master cylinder
Electric window motors
Passenger window switch
DT gear linkages
Upper glovebox
Cyclones
De-cat downpipe
Standard backbox
Standard midpipe
Electric mirrors (caps are china I think)
GTI boot trim
Radiator fans
And anything else that you can think of.
Pics of individual parts on request.
Located in Bromley, South London.
![[Image: 0hgVL.jpg]](http://i.imgur.com/0hgVL.jpg)
![[Image: w8LcV.jpg]](http://i.imgur.com/w8LcV.jpg)
![[Image: N83sd.jpg]](http://i.imgur.com/N83sd.jpg)
![[Image: 13OdR.jpg]](http://i.imgur.com/13OdR.jpg)
![[Image: p8yw3.jpg]](http://i.imgur.com/p8yw3.jpg)
![[Image: qQbRj.jpg]](http://i.imgur.com/qQbRj.jpg)
![[Image: BIp6k.jpg]](http://i.imgur.com/BIp6k.jpg)
Posts: 1,286
Threads: 132
Joined: Oct 2012
Reputation:
4
Thanks: 0
Given 0 thank(s) in 0 post(s)
Posts: 7,152
Threads: 130
Joined: Jan 2012
Reputation:
82
Location: Kingston
Car Model/Spec: 106 GO-NAD
Thanks: 0
Given 0 thank(s) in 0 post(s)
yhpm 
Member of the 99% warning or you're nothing club
Posts: 3,616
Threads: 0
Joined: Dec 2011
Reputation:
45
Thanks: 177
Given 28 thank(s) in 28 post(s)
Look at my baby in the background 
Posts: 8,749
Threads: 208
Joined: Jan 2012
Reputation:
60
Location: Wiltshire
Car Model/Spec: ph2 Gti6 / ph4 HDI Estate
Thanks: 1
Given 5 thank(s) in 5 post(s)
What are the coilies?
![[Image: DSC_0190-Copy_zpsf093f84d.jpg]](http://i1038.photobucket.com/albums/a468/167gti8/DSC_0190-Copy_zpsf093f84d.jpg)
Member of 99% warning or your nothing club!
Posts: 2,526
Threads: 143
Joined: Dec 2011
Reputation:
10
Location: South East London
Car Model/Spec: Ph3 XUD
Thanks: 1
Given 8 thank(s) in 8 post(s)
Coilovers are TA Technix ones. Just over a year old, springs have a small bit of rust where they've gone coilbound a couple times.
Posts: 8,749
Threads: 208
Joined: Jan 2012
Reputation:
60
Location: Wiltshire
Car Model/Spec: ph2 Gti6 / ph4 HDI Estate
Thanks: 1
Given 5 thank(s) in 5 post(s)
03-01-2013, 04:05 PM
(This post was last modified: 03-01-2013, 04:06 PM by puglove.)
Ah is it. What you looking for?
For the collies that is
Member of 99% warning or your nothing club!
Posts: 2,526
Threads: 143
Joined: Dec 2011
Reputation:
10
Location: South East London
Car Model/Spec: Ph3 XUD
Thanks: 1
Given 8 thank(s) in 8 post(s)
(03-01-2013, 04:05 PM)puglove Wrote: Ah is it. What you looking for?
For the collies that is
PM'd.
Posts: 1,286
Threads: 132
Joined: Oct 2012
Reputation:
4
Thanks: 0
Given 0 thank(s) in 0 post(s)
Posts: 2,526
Threads: 143
Joined: Dec 2011
Reputation:
10
Location: South East London
Car Model/Spec: Ph3 XUD
Thanks: 1
Given 8 thank(s) in 8 post(s)
(03-01-2013, 05:27 PM)Tyronnster Wrote: Can u pm price plz
For?
Posts: 853
Threads: 117
Joined: Oct 2012
Reputation:
3
Location: Wolverhampton
Car Model/Spec: 1.9 Non turbo estate
Thanks: 0
Given 0 thank(s) in 0 post(s)
How much you want for the fogs mate posted ?
Dragoon Blue Estate in a bit of a State
Posts: 2,526
Threads: 143
Joined: Dec 2011
Reputation:
10
Location: South East London
Car Model/Spec: Ph3 XUD
Thanks: 1
Given 8 thank(s) in 8 post(s)
(03-01-2013, 06:07 PM)Willo Wrote: How much you want for the fogs mate posted ?
PM'd.
Posts: 2,526
Threads: 143
Joined: Dec 2011
Reputation:
10
Location: South East London
Car Model/Spec: Ph3 XUD
Thanks: 1
Given 8 thank(s) in 8 post(s)
Bump
Posts: 3,109
Threads: 236
Joined: Mar 2012
Reputation:
36
Location: Stevenage
Car Model/Spec: '01 HDi DTurbo
Thanks: 0
Given 0 thank(s) in 0 post(s)
Hi dude,
Need a rain rail from the roof, the rubber bit which runs from the back edge of the door to the boot hatch. Mine is missing on the passenger side, they should just pull out. If you can remove yours in one piece, what's your price posted?
Disclaimer: The above is not to be taken to heart and is probably a joke, grow up you big girl.
![[Image: Sig500x130.png]](http://i430.photobucket.com/albums/qq25/chris_rx71/Sig500x130.png)
Posts: 2,526
Threads: 143
Joined: Dec 2011
Reputation:
10
Location: South East London
Car Model/Spec: Ph3 XUD
Thanks: 1
Given 8 thank(s) in 8 post(s)
(07-01-2013, 11:56 AM)C.A.R. Wrote: Hi dude,
Need a rain rail from the roof, the rubber bit which runs from the back edge of the door to the boot hatch. Mine is missing on the passenger side, they should just pull out. If you can remove yours in one piece, what's your price posted?
I'll go check in a minute as I know it's missing one from one side, hopefully not the side you want it from.
Posts: 2,526
Threads: 143
Joined: Dec 2011
Reputation:
10
Location: South East London
Car Model/Spec: Ph3 XUD
Thanks: 1
Given 8 thank(s) in 8 post(s)
Just checked, that's the side that's missing 
Posts: 3,109
Threads: 236
Joined: Mar 2012
Reputation:
36
Location: Stevenage
Car Model/Spec: '01 HDi DTurbo
Thanks: 0
Given 0 thank(s) in 0 post(s)
Bummer! The search continues...
Disclaimer: The above is not to be taken to heart and is probably a joke, grow up you big girl.
Posts: 7,152
Threads: 130
Joined: Jan 2012
Reputation:
82
Location: Kingston
Car Model/Spec: 106 GO-NAD
Thanks: 0
Given 0 thank(s) in 0 post(s)
car, want the one off the xsi? think its in good nick
/shameless plug
Member of the 99% warning or you're nothing club
Posts: 3,109
Threads: 236
Joined: Mar 2012
Reputation:
36
Location: Stevenage
Car Model/Spec: '01 HDi DTurbo
Thanks: 0
Given 0 thank(s) in 0 post(s)
I think they are different on a 5 door mate, as this runs from the back edge of the door to the roof hatch.
£14 for a set from Peugeot, maybe I should just go down that route!
Disclaimer: The above is not to be taken to heart and is probably a joke, grow up you big girl.
Posts: 7,152
Threads: 130
Joined: Jan 2012
Reputation:
82
Location: Kingston
Car Model/Spec: 106 GO-NAD
Thanks: 0
Given 0 thank(s) in 0 post(s)
oh i scrapped that xsi ages ago, i've a 3 door sat on my drive lol, drop us a pm, save spamming Sam's thread
Member of the 99% warning or you're nothing club
Posts: 3,109
Threads: 236
Joined: Mar 2012
Reputation:
36
Location: Stevenage
Car Model/Spec: '01 HDi DTurbo
Thanks: 0
Given 0 thank(s) in 0 post(s)
07-01-2013, 04:23 PM
(This post was last modified: 07-01-2013, 04:24 PM by C.A.R..)
(07-01-2013, 03:35 PM)samass Wrote: oh i scrapped that xsi ages ago, i've a 3 door sat on my drive lol, drop us a pm, save spamming Sam's thread PM'd
Disclaimer: The above is not to be taken to heart and is probably a joke, grow up you big girl.
Posts: 7
Threads: 2
Joined: Jan 2013
Thanks: 0
Given 0 thank(s) in 0 post(s)
how much do you want for the interior and for the boot catch? and the button? cheers joe
Posts: 2,526
Threads: 143
Joined: Dec 2011
Reputation:
10
Location: South East London
Car Model/Spec: Ph3 XUD
Thanks: 1
Given 8 thank(s) in 8 post(s)
(07-01-2013, 11:08 PM)joe2 Wrote: how much do you want for the interior and for the boot catch? and the button? cheers joe
Due to the bolster wear, £75 for the interior? (I think, I'm probably wrong, better condition ones run at about £100)
Keeping the boot catch for my other one, fed up of closing the boot 3 times before it stays shut 
Posts: 7
Threads: 2
Joined: Jan 2013
Thanks: 0
Given 0 thank(s) in 0 post(s)
ok mate ill let them go little bit pricey for me glwts
Posts: 101
Threads: 9
Joined: Nov 2012
Reputation:
0
Location: Nottingham
Car Model/Spec: Ph1. D Turbo
Thanks: 0
Given 0 thank(s) in 0 post(s)
Posts: 640
Threads: 23
Joined: Jul 2012
Reputation:
1
Thanks: 0
Given 0 thank(s) in 0 post(s)
Cyclones posted? Tread depth?
Posts: 8,749
Threads: 208
Joined: Jan 2012
Reputation:
60
Location: Wiltshire
Car Model/Spec: ph2 Gti6 / ph4 HDI Estate
Thanks: 1
Given 5 thank(s) in 5 post(s)
have you started on this yet?
Member of 99% warning or your nothing club!
Posts: 227
Threads: 32
Joined: Apr 2012
Reputation:
3
Location: Fareham, Hants
Car Model/Spec: 94 XRDT now Gone, '99 Meridian
Thanks: 0
Given 0 thank(s) in 0 post(s)
Working AC? (I hear the laughter in the background!!)
After a condenser. £?
Also the clones, alloy condition and tread depth? £?
Good price for both I'll make the journey for a collection.
![[Image: 2306s.png]](http://i243.photobucket.com/albums/ff274/smileynobike/2306s.png)
The Old_______and_______Slight Less Old
Posts: 2,526
Threads: 143
Joined: Dec 2011
Reputation:
10
Location: South East London
Car Model/Spec: Ph3 XUD
Thanks: 1
Given 8 thank(s) in 8 post(s)
(10-01-2013, 06:23 PM)puglove Wrote: have you started on this yet?
Got some things off like interior bits, but now the tank is drained I intend to start getting more of the mechanical stuff off.
Posts: 8,749
Threads: 208
Joined: Jan 2012
Reputation:
60
Location: Wiltshire
Car Model/Spec: ph2 Gti6 / ph4 HDI Estate
Thanks: 1
Given 5 thank(s) in 5 post(s)
Ok bud let us know when you got the collies off
And FYI im pretty sure the drip rail rubbers that car wants are universal from left to right
Member of 99% warning or your nothing club!
|
![[Image: Eq4gGTq.png]](http://i.imgur.com/Eq4gGTq.png)
![[Image: DSC_0190-Copy_zpsf093f84d.jpg]](http://s1038.photobucket.com/user/167gti8/media/DSC_0190-Copy_zpsf093f84d.jpg.html)
![[Image: 704e7db1.jpg]](http://i72.photobucket.com/albums/i162/birk69/704e7db1.jpg)