Breaking: HDi estate

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Breaking: HDi estate
#31
I can try my best for you, but no promises. Because it will be a last minute thing, would Sean be ok with paying for that at the same time if I cant get hold of you?
Reply
Thanks given by:
#32
He should be, but best ask before hand
[Image: sig.jpg]
Reply
Thanks given by:
#33
If you send me a pm when you have got the lights off and ready to post pal I will PayPal you the req ammount :-)
Reply
Thanks given by:
#34
How much for skirts, bump strips, the front half the center console (the bit with the ash tray in) and the switch pannel from below the steering wheel to the right?


Im gonna leave the bigger bits of bodywork as its just too much money to get them sprayed (unless your gonna offer me a very good price on all 4 doors with door cards, mirrors locks, a key and all the electric gubbins inside).
Reply
Thanks given by:
#35
You selling the strut brace?
[Image: Cn91r40h.jpg] 
Astor 6 Fast road/track project
Reply
Thanks given by:
#36
Strut brace has sold, as per post #11.

(06-01-2013, 09:53 AM)Dum-Dum Wrote: How much for skirts, bump strips, the front half the center console (the bit with the ash tray in) and the switch pannel from below the steering wheel to the right?


Im gonna leave the bigger bits of bodywork as its just too much money to get them sprayed (unless your gonna offer me a very good price on all 4 doors with door cards, mirrors locks, a key and all the electric gubbins inside).

Ill think of a price for you in a bit.
Reply
Thanks given by:
#37
Is the paint code moyc or something like that?
[Image: siggy1.jpg]

the smokey old bus that sounds like a tractor...
Reply
Thanks given by:
#38
(06-01-2013, 09:53 AM)Dum-Dum Wrote: How much for skirts, bump strips, the front half the center console (the bit with the ash tray in) and the switch pannel from below the steering wheel to the right?


Im gonna leave the bigger bits of bodywork as its just too much money to get them sprayed (unless your gonna offer me a very good price on all 4 doors with door cards, mirrors locks, a key and all the electric gubbins inside).

(06-01-2013, 11:53 PM)devils_fuel Wrote: Is the paint code moyc or something like that?

Eyzr or something. Aluminium silver it is, but the paint has got glitter fleck in, so no matter what, it would need a respray to match
Reply
Thanks given by:
#39
Hi mate when was u going to take the ecu off so I can send this payment before I spend the money :p
Reply
Thanks given by:
#40
the seat belt hight adjuster knobs and the flat trim that the button goes through . . are they black? . . if so i want them ta . Smile
Phase 1 D-Turdo, K14@24 psi, De-cat, meaty backbox, Bosch pump, grinded LDA pin, duel air fed K&N =133.7bhp & 188ft/lbs
Reply
Thanks given by:
#41
hey dude do u still have the grille and the bonnet at all?
Reply
Thanks given by:
#42
Bonnet, grill, MAF and engine cover SOLD

Ben, due to the car having to be mobile until the last few days, it wont be taken off for at least 2 weeks (at least are the key words here). If your happy to pay the money and wait, I can do that.

Chris (Dum), £25 for the skirts and lower centre console (£20 +5 P+P and PP charges) (I dont have the rub strips, and the ones I do have are bonded to the doors :p)
The other parts, Im having trouble pricing ATM, but will get back to you.

Matt, you after just the adjuster knobs yeah? Im 99% sure theyre black, but will check tomorrow.
Reply
Thanks given by:
#43
Ok mate ill wait give me a message when it's off Smile
Reply
Thanks given by:
#44
Sounds fair mate, can you wait till 20th and also give me a price on the other bits.
Reply
Thanks given by:
#45
(07-01-2013, 10:25 PM)rik1254 Wrote: Matt, you after just the adjuster knobs yeah? Im 99% sure theyre black, but will check tomorrow.

yes mate . .there's like a knob that you pull out to adjust hight of seatbelt and a cover about same size above it . .Smile
Phase 1 D-Turdo, K14@24 psi, De-cat, meaty backbox, Bosch pump, grinded LDA pin, duel air fed K&N =133.7bhp & 188ft/lbs
Reply
Thanks given by:
#46
(09-01-2013, 04:57 PM)Dum-Dum Wrote: Sounds fair mate, can you wait till 20th and also give me a price on the other bits.

Cracking, what are the exact parts you want again?

Using the list you gave the other day
"If its a white meridian there is a load of bits id love, the front bumper, all the doors, the skirts, and a few plastics out the dash board."

Call it £70 for all those parts (£30 bumper, £25 front doors, £10 rear door (plus free drivers rear due to damage) £5 for the plastic part (its the part by your right knee below the steering wheel right?) with all the grubbings apart from the airbag control, which will go with the keys
£85 if your collecting with the skirts and that too.


(09-01-2013, 05:12 PM)Mattcheese31 Wrote: yes mate . .there's like a knob that you pull out to adjust hight of seatbelt and a cover about same size above it . .Smile

No problem, make me an offer on them, sort of obscure parts, so I havent thought of a price for them.
Reply
Thanks given by:
#47
Ben, the ECU has now been joined with the engine so I can get shot of my 406 estate, sorry for the inconvenience.
Reply
Thanks given by:
#48
(09-01-2013, 05:55 PM)rik1254 Wrote: Using the list you gave the other day
"If its a white meridian there is a load of bits id love, the front bumper, all the doors, the skirts, and a few plastics out the dash board."

Call it £70 for all those parts (£30 bumper, £25 front doors, £10 rear door (plus free drivers rear due to damage) £5 for the plastic part (its the part by your right knee below the steering wheel right?) with all the grubbings apart from the airbag control, which will go with the keys
£85 if your collecting with the skirts and that too.
Thats an annoyingly good price, let me check the price of spraying and ill get back to you.
Reply
Thanks given by:
#49
(09-01-2013, 09:25 PM)Dum-Dum Wrote:
(09-01-2013, 05:55 PM)rik1254 Wrote: Using the list you gave the other day
"If its a white meridian there is a load of bits id love, the front bumper, all the doors, the skirts, and a few plastics out the dash board."

Call it £70 for all those parts (£30 bumper, £25 front doors, £10 rear door (plus free drivers rear due to damage) £5 for the plastic part (its the part by your right knee below the steering wheel right?) with all the grubbings apart from the airbag control, which will go with the keys
£85 if your collecting with the skirts and that too.
Thats an annoyingly good price, let me check the price of spraying and ill get back to you.

Glad to hear, please take into consideration the condition of the doors (shouldnt affect you because your going to spray anyway) and the fact that they don't come with door cards and the rears don't come with the window mechs, the drivers rear is damaged and missing its strip (free anyway) all doors will come with glass though (if removing the rear window mechs doesnt affect it), its all reflected in the price.

You do know the front doors are delocked right?
Reply
Thanks given by:
#50
Nate if theyer not coming with door cards and the rear window mechs theyer no use to me.

Ill take the other bits off you (skirts and center console) but i dont get paid till the 20th
Reply
Thanks given by:
#51
You in or near the Rhondda?
Reply
Thanks given by:
#52
(12-01-2013, 11:47 PM)Pugmarshall Wrote: You in or near the Rhondda?

More towards England I am. Not far from abergavenny.

(12-01-2013, 03:15 PM)Dum-Dum Wrote: Nate if theyer not coming with door cards and the rear window mechs theyer no use to me.

Ill take the other bits off you (skirts and center console) but i dont get paid till the 20th

Can do the door cards also at £5 a pop (and one free) and the window mechs free if you take at my offer price. (so will be £100 for everything).
If not, ill make sure I grab the skirts and other things off asap for you.
Reply
Thanks given by:
#53
Nah ill pass mate cos its a fair bit to get them sprayed.
Reply
Thanks given by:
#54
I am looking for the electrical connector that plugs into the bottom of the double-engine management relay (that brown/red relay on the nearside just in front of the bulkhead). The connector has 15 sockets (for the 15 pin relay) with 9 wires.
I need the connector + about 1 inch of the wires.
Cheers, Pete
Reply
Thanks given by:
#55
(09-01-2013, 05:55 PM)rik1254 Wrote: [quote='Dum-Dum' pid='19

No problem, make me an offer on them, sort of obscure parts, so I havent thought of a price for them.
[/quote]

5er . . .Smile
Phase 1 D-Turdo, K14@24 psi, De-cat, meaty backbox, Bosch pump, grinded LDA pin, duel air fed K&N =133.7bhp & 188ft/lbs
Reply
Thanks given by:
#56
(16-01-2013, 11:11 AM)petef Wrote: I am looking for the electrical connector that plugs into the bottom of the double-engine management relay (that brown/red relay on the nearside just in front of the bulkhead). The connector has 15 sockets (for the 15 pin relay) with 9 wires.
I need the connector + about 1 inch of the wires.
Cheers, Pete

Ill take a look through the engine and see if I can find what your on about and get back to you.

(16-01-2013, 11:29 AM)Mattcheese31 Wrote:
(09-01-2013, 05:55 PM)rik1254 Wrote: [quote='Dum-Dum' pid='19

No problem, make me an offer on them, sort of obscure parts, so I havent thought of a price for them.

5er . . .Smile
[/quote]

Make that £5 and you cover the fees (or pay PPG) and we've got a deal Smile
Reply
Thanks given by:
#57
(16-01-2013, 12:07 PM)rik1254 Wrote:
(16-01-2013, 11:11 AM)petef Wrote: I am looking for the electrical connector that plugs into the bottom of the double-engine management relay (that brown/red relay on the nearside just in front of the bulkhead). The connector has 15 sockets (for the 15 pin relay) with 9 wires.
I need the connector + about 1 inch of the wires.
Cheers, Pete

Ill take a look through the engine and see if I can find what your on about and get back to you.

(16-01-2013, 11:29 AM)Mattcheese31 Wrote:
(09-01-2013, 05:55 PM)rik1254 Wrote: No problem, make me an offer on them, sort of obscure parts, so I havent thought of a price for them.

5er . . .Smile

Make that £5 and you cover the fees (or pay PPG) and we've got a deal Smile

cheers mate . .i'll PM thee . Smile
Phase 1 D-Turdo, K14@24 psi, De-cat, meaty backbox, Bosch pump, grinded LDA pin, duel air fed K&N =133.7bhp & 188ft/lbs
Reply
Thanks given by:
#58
(16-01-2013, 12:07 PM)rik1254 Wrote:
(16-01-2013, 11:11 AM)petef Wrote: I am looking for the electrical connector that plugs into the bottom of the double-engine management relay (that brown/red relay on the nearside just in front of the bulkhead). The connector has 15 sockets (for the 15 pin relay) with 9 wires.
I need the connector + about 1 inch of the wires.
Cheers, Pete

Ill take a look through the engine and see if I can find what your on about and get back to you.

(16-01-2013, 11:29 AM)Mattcheese31 Wrote:
(09-01-2013, 05:55 PM)rik1254 Wrote: No problem, make me an offer on them, sort of obscure parts, so I havent thought of a price for them.

5er . . .Smile

Make that £5 and you cover the fees (or pay PPG) and we've got a deal Smile

for some reason this forum wouldn't let me post a reply using my old username- so i've had to create a new user.
Am I right in thinking Rik254 that you have the connector and would like an offer? Would £10 be ok? If this forum blocks me again I may need to create another user. How do I get in touch with you?
Thanks, Pete
Reply
Thanks given by:
#59
for some reason this forum wouldn't let me post a reply using my old username- so i've had to create a new user.
Am I right in thinking Rik254 that you have the connector and would like an offer? Would £10 be ok? If this forum blocks me again I may need to create another user. How do I get in touch with you?
Thanks, Pete


The offer was for Matt for the B piller seat belt cover thingys. Ill let you know about your part when/ if I can get it.

Drop me an email - rik1254@googlemail.com
Reply
Thanks given by:
#60
Mate will you PM me payment details and ill sort it friday afternoon.
Reply
Thanks given by:


Possibly Related Threads…
Thread Author Replies Views Last Post
  Breaking: my hdi estate Matt 16 5,416 02-03-2017, 10:56 PM
Last Post: lph
  Breaking moonstone hdi estate. kentiiboii 0 1,173 02-03-2017, 10:16 PM
Last Post: kentiiboii
  Breaking silver ph2 estate ash23 2 1,473 28-01-2016, 08:28 PM
Last Post: ash23

Forum Jump:


Users browsing this thread: 5 Guest(s)