106 immobiliser (probably) problem.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
106 immobiliser (probably) problem.
#1
My mum's 106...

Occasionally, it won't start.

It'll turn over fine, but not attempt to fire. Leave it for a minute and it'll start. Most of the time it just starts on the button and the failure to start isn't reproducible.

It's got the inductive immobiliser, not a keypad type - the symptoms are exactly the same if you use the bare key blade (omitting the chip) so I'm thinking sporadic immo fault.

So, unless any other suggestions as to cause - anyone know an easy way to get rid of the immobiliser?

Oh, yeah, might help - it's a 1.1 petrol...
Reply
Thanks given by:
#2
Is that the immobiliser that you have a little metal disc on the key or fob ?
If it is - a friend of mine had a prob with hers a few years ago,I just removed the box and all associated wiring,too long ago to remember the details but I am no electric expert and other than a little awkward to get at some of the stuff - I dont remember any real problem with the job.
Reply
Thanks given by:
#3
It's the type with a transponder built into the key (like on a 306)...
Reply
Thanks given by:
#4
OK - obviously completely different system - sorry couldnt help !
Reply
Thanks given by:
#5
Nah, no worries.

I'm sure I'll find a way around someday...
Reply
Thanks given by:
#6
that's usually the aerial around the barrel not picking up the chip, its a generic part so one off any other 106/saxo will do, probably crosses to other pugs.
need a part number? http://public.servicebox.peugeot.com/ and http://service.citroen.com/ will sort you out.
Reply
Thanks given by:


Forum Jump:


Users browsing this thread: 2 Guest(s)