14-08-2015, 04:14 PM
(This post was last modified: 14-08-2015, 04:17 PM by Rippthrough.)
As above, will get some pictures later when I can actually move enough stuff to get them out 
Good condition, where they sometimes crack in the corner from age has been sanded back and repaired properly with solvent and epoxy - not just a dab of filler like some
I have the seals too.
£15 ono.
I also have a some proper 2-pack Platinium Silver paint+hardener (think there's a full litre) and the matching lacquer as well - which I was going to use on them and for doing my roof. Cost me about £70 at the time, you can take it with the skirts for £20. Again, pics to follow.
Good condition, where they sometimes crack in the corner from age has been sanded back and repaired properly with solvent and epoxy - not just a dab of filler like some
I have the seals too.
£15 ono.
I also have a some proper 2-pack Platinium Silver paint+hardener (think there's a full litre) and the matching lacquer as well - which I was going to use on them and for doing my roof. Cost me about £70 at the time, you can take it with the skirts for £20. Again, pics to follow.
Custom roll cages/shiny suspension bits/general fabrication work undertaken, PM me.
Top engine mount repair/reinforcement/chocking for cracked chassis and high powered cars, drive in, drive out, 2 hour turnaround.
Top engine mount repair/reinforcement/chocking for cracked chassis and high powered cars, drive in, drive out, 2 hour turnaround.