Phase 1 front fog alternatives

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Phase 1 front fog alternatives
#1
As titled, i've been looking around for a while and struggling to find any alternative.

Basically, i'll be obtaining a front bumpber off Chris (hopefully) and i dont want/use front fog lights.

As with the phase 3, you can get rallye blanks, is there anything for a phase 1?

Perhaps a type of brake vent? - in all honesty, i'm thinking on one side to get some duct and running it up to the turbo intake, but again, i dont just want the foglight to be blank, some sort of shroud.

Anyone for any ideas?
Diablo Hdi Dturbo and 205 1.9 project - it lives!
Reply
Thanks given by:
#2
2 Cold air feeds? 1 to the filter/turbo, other to intercooler?
Reply
Thanks given by:
#3
S1 106 rallye blanks may fit, as I think the fog lights for S1 106's are the same for 205's, Phase 1 306's etc.

[Image: 247824_10150275472131180_509016179_87595...4362_n.jpg]

[Image: img1035areseb6.jpg]



[Image: rallyepic1vx2.jpg]
Reply
Thanks given by:
#4
Cibie made some ph1 fog covers if anyone can find a pic
[Image: IMG_20130925_181339_zps95df48fa.jpg]
Reply
Thanks given by:
#5
get on the fibreglass and make some custom jobbies?
[Image: k6f9Fk]


Member of the 99% warning or you're nothing club
Reply
Thanks given by:
#6
Found this. The ones I was thinking of is white with black writing though
[Image: Angel5_sized.jpg]

Edit:

[Image: Ellington084.jpg]
[Image: IMG_20130925_181339_zps95df48fa.jpg]
Reply
Thanks given by:
#7
+1 for rallye blanks. Although there around £90 new. You can get from a 106 slalom (base spec) normally found lurking in scrap yards.
Reply
Thanks given by:
#8
yellow front fogs would look awesome on a p1 imo
[Image: sigjpg.jpg]
Serious.
Reply
Thanks given by:
#9
Not a fan of the blanks imo, i like a smooth look, and those 106 blanks look uber retro for my likings.

I could fibreglass something i suppose, but i like the idea of the cold air feeds.
Diablo Hdi Dturbo and 205 1.9 project - it lives!
Reply
Thanks given by:
#10
A smooth look on a phase 1?!

Not gonna happen - they have the same front end as David Coulthard.
Reply
Thanks given by:
#11
Demon tweeks sell them Cibie covers I have em in mine!! About 25 delivered iirc
[Image: SDC10442-1.jpg]
Reply
Thanks given by:
#12
I have the grills taken out of my front bumper and im nearly tempted to not put them back in it looks real nice imo Smile
Reply
Thanks given by:
#13
Dan! Wrote:A smooth look on a phase 1?!

Not gonna happen - they have the same front end as David Coulthard.

not necessarily smoothed, as in euro'd, but a more of a vent than anything..

like this

[Image: a-fog-lamp2.bmp]

where can i get these?!

edit: or even this http://www.ebay.co.uk/itm/MG-ROVER-AIR- ... 2316cca0ee and custom it?
Diablo Hdi Dturbo and 205 1.9 project - it lives!
Reply
Thanks given by:
#14
'bay? tweeks? race supply sites? oorrr diy
[Image: k6f9Fk]


Member of the 99% warning or you're nothing club
Reply
Thanks given by:
#15
http://www.ecosse-peugeot.co.uk/show_pr ... 64&appid=4
[Image: sig.jpg]
Reply
Thanks given by:
#16
photo coming soon Doh
Diablo Hdi Dturbo and 205 1.9 project - it lives!
Reply
Thanks given by:
#17
72 quid!! Confusedhock:
[Image: k6f9Fk]


Member of the 99% warning or you're nothing club
Reply
Thanks given by:
#18
They used to have photos, They fit like the covers but with a center like the pic of the 205 you posted.


Same as these

http://www.ecosse-peugeot.co.uk/show_pr ... 50&appid=4

[Image: ss3_f.jpg]
[Image: sig.jpg]
Reply
Thanks given by:
#19
See, i quite like the look of them - give them a coat of matt black to merge with the bumper, could look nice!

Chris, I'm in portsmouth for the next 3 weeks, if you want/need rid of that bumper soon - i can collect from there at any point.

Any more suggestions to what to put in the space? mesh? grill?
Diablo Hdi Dturbo and 205 1.9 project - it lives!
Reply
Thanks given by:
#20
[Image: c4a75d95.jpg]
Perv 106 1.4 xs First Pug Love - Scrapped
Perv 306 1.6 5 Door Hore - Sold
110bhp 207 Hdi Sport - Used as a Brake
173bhp T25 Ph1 Diablo Dturbo - Scrapped
Thirsty Bitch Volvo 850 Estate - Sold
51bhp Berlingo Nad DT Van - Sold
Slow as f*ck Dispatch Work Horse

www.prestige-auto-care.co.uk
Reply
Thanks given by:
#21
Its all about the yellow fogs Tongue

[Image: DSC_0022.jpg]
Reply
Thanks given by:
#22
Whats with all the pics of fog lights? he said already that he want an alternative as he wants to remove them, thats the point of the thread isn't it? lol
Team Orange Engine Bay

My flickr photostream - http://www.flickr.com/photos/markairey
Reply
Thanks given by:
#23
Well done mark, your pedantic mind come into use and picked up the point of the conversation!
Diablo Hdi Dturbo and 205 1.9 project - it lives!
Reply
Thanks given by:
#24
Ginge.. what about some yellow tinted fogs? Could go well :-P
[Image: IMG_20130925_181339_zps95df48fa.jpg]
Reply
Thanks given by:
#25
No, I don't like the fogs, I'd like an alternative, hence the title Wink
Diablo Hdi Dturbo and 205 1.9 project - it lives!
Reply
Thanks given by:
#26
boobies. stick some of those stress boobies in there
[Image: k6f9Fk]


Member of the 99% warning or you're nothing club
Reply
Thanks given by:
#27
Get two of those oblong Sponebob Squarepants demister pads and stick those in Big Grin
[Image: 43f2473c.jpg]
Reply
Thanks given by:
#28
Craig-o Wrote:Get two of those oblong Sponebob Squarepants demister pads and stick those in Big Grin

...about as attractive as yellow fogs
Diablo Hdi Dturbo and 205 1.9 project - it lives!
Reply
Thanks given by:


Possibly Related Threads…
Thread Author Replies Views Last Post
  Registration P50 JCM red 306 with phase 3 front, tuned renault9turbo 15 4,233 26-07-2014, 02:10 PM
Last Post: renault9turbo

Forum Jump:


Users browsing this thread: 1 Guest(s)