Posts: 588
Threads: 91
Joined: Oct 2013
Reputation:
2
Location: Reading
Car Model/Spec: BMW 330Ci/VW Up/205GTi/205Mi16
Thanks: 0
Given 5 thank(s) in 5 post(s)
23-07-2014, 10:13 AM
(This post was last modified: 23-07-2014, 10:13 AM by Alan_M.)
I was fitting my speakers to the front doors yesterday afternoon, to find the FR speaker wasn't working. Eventually found a broken wire in the loom between shell and door. The other wires look as though they've been swiped with a knife (cut insulation), very odd.
Anyway, does anybody know if this loom has a plug on the shell side making it easy to remove? I'd rather replace but can repair if needs be.
Posts: 7,825
Threads: 465
Joined: Dec 2011
Reputation:
114
Location: Cullompton Devon
Car Model/Spec: Vauxhall
Thanks: 1
Given 98 thank(s) in 92 post(s)
there is no plug or joint on the car side of the door hinge it is part of the main loom
one of the many bad points in design on the 306 not being able to replace the flexy part easy of the hinge loom
Posts: 7,825
Threads: 465
Joined: Dec 2011
Reputation:
114
Location: Cullompton Devon
Car Model/Spec: Vauxhall
Thanks: 1
Given 98 thank(s) in 92 post(s)
take the door off its easyer
the loom is quite short with no give where it exits inside the car
Posts: 3,539
Threads: 42
Joined: Mar 2012
Reputation:
28
Thanks: 3
Given 89 thank(s) in 88 post(s)
there is a plug but its a looooong way into the loom
Posts: 7,825
Threads: 465
Joined: Dec 2011
Reputation:
114
Location: Cullompton Devon
Car Model/Spec: Vauxhall
Thanks: 1
Given 98 thank(s) in 92 post(s)
your giving wrong info welshpug!
if you would like wiring layouts with plugs I can supply!
there is not a simple one plug that unplugs car side, that removes all of the door loom to the door you would need to replace the whole bulkhead dash loom
[attachment=17943]
[attachment=17944]
[attachment=17945]
[attachment=17946]
