Posts: 26
Threads: 8
Joined: May 2012
Thanks: 0
Given 0 thank(s) in 0 post(s)
hi i would like to know how to remove the dash trim from around my sterio, blowers and heater controlls?
i have removed the piece from around the fag lighter and clock it is just how to remove the rest i'd like to know please
Posts: 2,963
Threads: 100
Joined: Dec 2011
Reputation:
12
Location: Portsmouth
Car Model/Spec: 306 dturbo Ultra Spec
Thanks: 0
Given 0 thank(s) in 0 post(s)
Unscrew the clock and the two screws at the bottom holding that section in.
Unclip all the buttons hazard light and what every else you have down there.
Pull ou the radio and unplug everything. Remove the cage that holds it in place.
Either side of the radio slot there is a bolt nut either side. Using a small spanner undo these then you can pull the main fascia off be gentle the bolts either side of te slot sometimes break.
Then the top vents. Undo the two or three screws below the vents, then pull gently and un clip them from the vent pipes behind them.
Posts: 26
Threads: 8
Joined: May 2012
Thanks: 0
Given 0 thank(s) in 0 post(s)
thanks followed the guide all i can't do atm is take the blowers out the top i have took the torx out and it seems extremely stiff to get out i don't want to break anything
Posts: 2,963
Threads: 100
Joined: Dec 2011
Reputation:
12
Location: Portsmouth
Car Model/Spec: 306 dturbo Ultra Spec
Thanks: 0
Given 0 thank(s) in 0 post(s)
Pull pull pull. When the top comes loose you need to unclip them from the pipes behind.