Rear Beam Rebuild kit

[Daniel306]

Found these on ebay, he says they are genuine, anyone want to do a group buy or is there any cheaper genuine ones?

http://www.ebay.co.uk/itm/Peugeot-205-3 ... 4a9ef9880b

[sweeney1987]

paragon pug stuff is always genuine in my experience.
I got a gen. set for â?¬70 over here, still never fitted it

[Poodle]

I'm sure someone told me pug are cheaper when i picked up a set of these, sounded dubious to me but might be worth checking out...

[Matt]

I'd be interested in something like this, buying a beam for £20 want to rebuild before I put it on

[Daniel306]

any idea how much pug want for them? i need them asap

[Connor]

any idea how much pug want for them? i need them asap

Phone them and ask? Or check service box

[Daniel306]

cant find them in service box, il try phone in the morn if they are open

[Connor]

There won't be a "kit" listed, will have to pick out the bits individually

[Daniel306]

is 100 a good price for all the parts?

Outer Bearings x 2
Inner Bearings x 2
Crossmember Seals x 2
Outer Seal Cups x 2
Suspension Arm Seals x 2
Crossmember Seals Ext x 2
Torsion Bar Studs x 2
Eccentric Washers x 2
Torsion Bar Torx Bolts x 2

[Gunge]

Before buying parts i'd strip the beam to see if it can be rebuilt if the bearing has worn the shaft a new shaft is needed

[Connor]

Personally when I rebuild mine, ill be replacing the shafts anyway

[Daniel306]

The car had no camber or any probs, got it apart, shafts are fine no marks at all, it was off a 80k 6, that was standard hight, im thinking that il just put two grease nipples in and fit it, il rebuild it total when it fails,

[Daniel306]

change of plan, just going to rebuild it now, i cant get a press untill the 9th and yet to get all the parts, is it possible to put the disks hubs on my drum arms for the mean time, i dont really want to buy new brakes for the drums just to put disks on in jan

[Connor]

No, someone else wanted to do that not long ago, turns out the shafts are different