S16 Phase1 half leather seats

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
S16 Phase1 half leather seats
#1
Had these for around 18months now. Got as far as fitting the front ones when 2 days later some old duffer pulled straight accross infront of my china Hdi and wrote it clean off. They have since sat in dry storage in a cupboard at home. The pretensioners weren't connected at the time of the crash so nothing has gone off and there is no seat frame damage, quite the opposite infact.

These are my favourite seats that ever came in a 306 from factory being phase 1 they have the higher bolsters with metal frames inside the bolsters themselves which are absolutely lovely to sit in. The S16 seats are the only leather version to have the rear headrests moulded into the seats themselves whic IMO looks a lot better than the later types do.

Since they have been off the car I have stripped them back to the bear frames to weld up the extra bracing in the bolsters as their common for snapping off as peugeot decided they woul only require a tiny little tac weld which wasn't really up to the job. I also fixed the drivers lumbar support adjuster which now works as it should. I did all this as was planning to keep them for next time I get a pug but I don't think that's going to happen any time soon now I have the Leon.

They are not mint, there are a few scuffs to the top of the offside rear seat back, a few small fag burns on the bases I both seats, and slight wear marks to the leather on a couple Of the bolsters but this is hardly noticeable once their in the car to be honest.

I'm after £120ono collected from Kent/ East Sussex area or can deliver within reasonable distance in the work van at buyers cost. Their pretty rare now considering not many S16's were made and their now 20 years old....

[Image: D8827917-F79E-41D2-A564-B90AEA4BB375_zpskw8md9zc.jpg]

[Image: E64FB5B2-D464-42C3-A386-AE52E6745562_zpsmd9k1t7h.jpg]

[Image: D7AA7071-5FDC-44FD-BEA2-5F916A476296_zpsenm3r1bv.jpg]

[Image: F70BA5BE-D7A8-4A56-B506-ADEC6A3DE450_zps1buqqkpn.jpg]

[Image: 8E7564BD-5FC4-4D98-A6F4-F19355B4FF33_zpsyb3fck7z.jpg]

[Image: FB0A00AE-E529-4BF5-9724-236762E10DF2_zpsxkogxibb.jpg]

[Image: E380EE29-8952-49F4-842A-174619C16F40_zpsi2coxvw3.jpg]

[Image: D834F675-6BB7-47B3-90BB-4E0AF3B105F8_zpsj0byfqqs.jpg]

[Image: 1C6B963D-3B2D-47AC-96DD-E8D5ACAAAE0E_zps8fr5onac.jpg]

[Image: AA88E5FA-1C35-42A8-BA3C-91BF5BC9416E_zps6kze2qaz.jpg]

[Image: 9D72734D-3670-4A5A-80A7-C179DF107DE4_zpsetp0qt67.jpg]

[Image: 51A5DADF-B498-417E-A0E3-4F5D02CBE5B2_zpsnpmjpyim.jpg]
Reply
Thanks given by:
#2
I always do but I've got to speak up for these seats, I have them in mine and they are by far the best seat ever fitted in a 306, comfy, supportive and very bucket like, everyone that gets in my car for the first time is like wow, these seats are amazing lol
Phase 1 D-Turdo, K14@24 psi, De-cat, meaty backbox, Bosch pump, grinded LDA pin, duel air fed K&N =133.7bhp & 188ft/lbs
Reply
Thanks given by:
#3
Uh they are among the most comfortable seats to sit in IMO.

I recently put high bolstered Leather Golf MK4 Recaro's into my Leon and their pretty good but not nearly as comfortable as phase one 306 seats.

If I could bodge them in somehow I would lol. Don't think they would go to well with the bright red car though Wink
Reply
Thanks given by:
#4
Ohhhh they are nice! postage to northern ireland would cost a fair bit though I would say
[Image: 20gh7o0.jpg]
Reply
Thanks given by:
#5
Yeh I imagine so.... Could come over on a ferry if you want them that bad Big Grin
Reply
Thanks given by:
#6
Bumpy..... Offers?
Reply
Thanks given by:
#7
SOLD Big Grin
Reply
Thanks given by:
#8
BUMP 

After selling these some time ago I ended up buying the car they ended up in but gave now sourced a low mileage rallye interior fir the car so these are up for sale again in much the same condition.
Reply
Thanks given by:
#9
Bumpy £100 can deliver for cost of fuel within reasonable distance. Offers?
Reply
Thanks given by:
#10
Still got these. Anyone want to save them from slowly going mouldy in my garage over the winter for £50?
Reply
Thanks given by:
#11
bargain, someone get them bought! . . . Smile
Phase 1 D-Turdo, K14@24 psi, De-cat, meaty backbox, Bosch pump, grinded LDA pin, duel air fed K&N =133.7bhp & 188ft/lbs
Reply
Thanks given by:


Possibly Related Threads…
Thread Author Replies Views Last Post
  Ph3 half leather alcantara interior Dangti6 3 1,721 09-09-2017, 08:11 AM
Last Post: roland rat
  FOR SALE: FREE 5 Door Half Leather Leaf Pattern Interior Eeyore 5 1,757 12-04-2016, 01:31 PM
Last Post: Eeyore
  Late Meridian Half Leather Seats for 5dr / Estate models (Swindon) powerandtorque 0 998 30-08-2015, 05:59 PM
Last Post: powerandtorque

Forum Jump:


Users browsing this thread: 1 Guest(s)