29-03-2015, 05:47 PM
After taking the fan connection off the loom I found an issue. One of the spades was badly corroded.
I scraped out a lot of the corrosion but it's still pretty bad and now I'm missing one spade.
Can these come apart?
![[Image: 2015%2B-%2B2]](https://lh5.googleusercontent.com/-jK3u8o7TUMg/VRbQ47cgj0I/AAAAAAAAASE/h1N8rdsPr5I/w415-h553-no/2015%2B-%2B2)
Left connector: fan
Right connector: loom
The blue mess is where I think the spade should be in the fan side. I've attacked it to get in but with no luck.
Would the easiest option be a new fan loom? (anyone got such a thing?) or find one, cut it up and re-seal it myself? Not ideal.
On the right the larger single spade is very loose in its holder.
How do get in to fix these? I hate car electrics.
I scraped out a lot of the corrosion but it's still pretty bad and now I'm missing one spade.
Can these come apart?
Left connector: fan
Right connector: loom
The blue mess is where I think the spade should be in the fan side. I've attacked it to get in but with no luck.
Would the easiest option be a new fan loom? (anyone got such a thing?) or find one, cut it up and re-seal it myself? Not ideal.
On the right the larger single spade is very loose in its holder.
How do get in to fix these? I hate car electrics.
![[Image: wallye-gtd.JPG?raw=1]](https://www.dropbox.com/s/pcxk1pgpaucznvr/wallye-gtd.JPG?raw=1)