FOR SALE: White 3 Door 205 1.9 XUD9TE

[silverzx]

Pretty sure I'm going to be selling the 205 would happily take a 306 DTurbo with cash going either way dependant on condition etc.

Milage: 160k
MOT: December 3rd 2014
TAX: None
Owners: 10

Body:
- Standard poverty/sleeper spec shell
- Professionally resprayed three years ago (the same white)
- Optional red reflective "PEUGEOT 205" strip
- Sun shine spec sun roof, minor leak from front corners in heavy rain

Engine:
- XUD9TE fitted by Mei/WelshPug/"Walking Peugeot Encyclopaedia" to very high standard
- TD04L de-wastegated
- 11mm Bosch (rebuilt by Darren)
- 2 x 10" slim fans & custom bracket/cable ties
- Straight through to backbox

Suspension:
- 40mm on front
- Standard height on rear

Brakes:
- 266mm HDi brakes, plenty of meat/life left in them

Interior:
- Poverty spec everything, windy windows, no glove box etc (light weight)
- Dash cowling missing, I ripped it out as I was intending to fit my STDT cluster & cowling

Wheels:
- Will come on steelies of some sort most likely

Everything can be found in my project thread for more info about the cars history, pictures etc: http://306oc.co.uk/forum/thread-8819.html

It will have a new ARB bush fitted and I'll be keeping the 11mm. I'm happy to put a 9mm Bosch or Lucas on depending on price/deal/etc. Same applies for the TD04L, I might put the standard K14 back on, it depends on whos interested.

Here's the initial temporary repair, since it's had another headlight, a matching white bumper and the wings been bent about a bit and hammerited to protect against rust.



I'll happily include the spare GTi wing I have that is straight but obviously won't match the other wing (which is a non-GTi variant).

I've been 100% honest as always.

If I get no/little interest I'll just revert it as close back to standard as possible and chuck it on eBay with no reserve or MAN THE F**K UP AND VNT THE B*TCH!

Any questions, please ask.

[padge]

dayyyyummm

[silverzx]

This ARB bush is turning out to be a pig! I can't get the bush and the clamp over together there just isn't enough space even with jacks and pulling it with a tow rope.

Could I drop the subframe down to get more access? Mei or anyone have any advice or suggestions on this?

Got most of Tuesday to tackle it so if it means getting the subframe off/down then so be it?

[Chris_90]

Drop sub frame rear bolts 4 bolts there took me 10mins to just drop rear of sub frame and fit the arb really easy tbh.

[td_dan]

Exactly as chris said undo the for bolta at rear if the frame and you will get it done in no time

[silverzx]

Ok lovely nice one chaps! Muchos thankios!