long shot but worth a crack! - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: General (https://www.306oc.co.uk/forum/forumdisplay.php?fid=6) +--- Forum: The Couch (https://www.306oc.co.uk/forum/forumdisplay.php?fid=7) +--- Thread: long shot but worth a crack! (/showthread.php?tid=9856) |
long shot but worth a crack! - wiggy - 16-01-2013 Hi guys, Long shot I know but worth I shot, about a year ago I sold a car I did a lot of work on and want it back! LOL Its only a 1.4 306 5dr with the reg Y482 SRP in dialablo red. Wanted back for a 1.6/1.8 conversion. It was all smoothed out with a black sun strip, last I no it had black 5 spoke alloys, slammed on its arse. Hope some one can help! Lol RE: long shot but worth a crack! - the milkman - 16-01-2013 an idea on area seen might help people get an idea mate RE: long shot but worth a crack! - 4WayDiablo - 16-01-2013 Doesn't ring a bell. Although 1.6/1.8 conversion.. Why lol balls out gti RE: long shot but worth a crack! - the milkman - 16-01-2013 (16-01-2013, 05:32 PM)4WayDiablo Wrote: Doesn't ring a bell. Although 1.6/1.8 conversion.. Why lol balls out gti for once i agree with phil he makes sense if your gonna spend cash on conversion spend it on something worth wile RE: long shot but worth a crack! - Dum-Dum - 16-01-2013 Im trying to remember but theres a bloke by me called robb with a diablo 5dr and id guess its only a 1.4 cos of his age. Its on its arse and pretty smooth looking. Forget his username though RE: long shot but worth a crack! - 4WayDiablo - 16-01-2013 (16-01-2013, 06:01 PM)Dum-Dum Wrote: Im trying to remember but theres a bloke by me called robb with a diablo 5dr and id guess its only a 1.4 cos of his age. Its on its arse and pretty smooth looking. Not that guy with the twin exhaust and astra(?) Splitter? Came to ace a couple times? RE: long shot but worth a crack! - Dum-Dum - 16-01-2013 Think so, had made monster can centers for the wheels RE: long shot but worth a crack! - 4WayDiablo - 16-01-2013 Haha... Yeah.... Can't remember his name but I know the guy your on about. Might have a nosey later RE: long shot but worth a crack! - puglove - 16-01-2013 you mean this one RE: long shot but worth a crack! - 4WayDiablo - 16-01-2013 Yup :-) RE: long shot but worth a crack! - puglove - 16-01-2013 it's a 1.6 anyway RE: long shot but worth a crack! - wiggy - 16-01-2013 Last known sightin was in rotherham area, I sayin 1.6 conversion for them both being 8valve and hopfully easier lol will try and get a pic up soon won't let me upload 1 from my tablet RE: long shot but worth a crack! - 4WayDiablo - 16-01-2013 The 1.6 is pretty much the same block anyway so not much difference but no point in doing it really as its very little gain RE: long shot but worth a crack! - wiggy - 16-01-2013 What would be needed for a gti6 conversion, I know engine and box, would I have to re possitions the engine mount and what about the ecu? RE: long shot but worth a crack! - samass - 16-01-2013 (16-01-2013, 09:52 PM)wiggy Wrote: What would be needed for a gti6 conversion, I know engine and box, would I have to re possitions the engine mount and what about the ecu? engine, box, loom, ecu, driveshafts, probably hubs, either subframe or drill out the current one for the lower mount, cat, heater matrix hoses, top rad hose. basically, get a rear ended '6 and swap the entire front end over |