+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16)
+--- Forum: XUD Section (https://www.306oc.co.uk/forum/forumdisplay.php?fid=11)
+--- Thread: TD04 adapter plates from japan (/showthread.php?tid=9469)
TD04 adapter plates from japan - Ben - 03-01-2013
Could be a good buy, would just have to weld on an elbow.
http://www.ebay.co.uk/itm/SUBARU-EJ20-Turbo-Flange-Turbine-Outlet-Dump-pipe-63mm-/360549309046?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item53f269da76
RE: TD04 adapter plates from japan - cwspellowe - 03-01-2013
It's not really an adapter plate though is it? Although it's a neater option than just chopping a bit of steel plate. People running td04's should really be using a 2.5" elbow anyway, and a custom downpipe.
Still, £24 posted, plus getting a tight radius elbow, plus welding, plus a mani>turbo adapter, you wouldn't be much better off financially than just using CJ's plates
RE: TD04 adapter plates from japan - Ben - 03-01-2013
Using CJ's plates doesnt allow you to use a 2.5 inch elbow though do they? Whereas this would.
RE: TD04 adapter plates from japan - cwspellowe - 03-01-2013
Yeah, but if you're going down that route you'd be cheaper getting a free 10mm bit of plate from a metal merchant and making it yourself, like I did with the GT. £24 is a lot of money just to have something neat when you still need to get the elbow, a flexi pipe and a sleeve to fit the exhaust.
RE: TD04 adapter plates from japan - Ben - 03-01-2013
Yeah I see what you mean, I wouldn't buy it myself for the same reason. Just thought I'd bring it to the attention of people who might not have the time or equipment to make a plate themselves.