307 crankshaft pulley - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16) +--- Forum: DW10 HDi section (https://www.306oc.co.uk/forum/forumdisplay.php?fid=10) +--- Thread: 307 crankshaft pulley (/showthread.php?tid=9464) |
307 crankshaft pulley - Strikeforce - 03-01-2013 Right i got a clapety noise coming from my cambelt area that i think is my pulley, I have orderd this 1 for a 307 2.0 hdi as its a solid unit so should be better? Is there any other parts that i will need to change when swapping (new aux belt obvs) Cheers guys RE: 307 crankshaft pulley - Just Sean - 03-01-2013 no. just the aux belt mate. Some people say a new bolt but i havnt. Just use some locktght. RE: 307 crankshaft pulley - Strikeforce - 03-01-2013 Ahh sweet loctight it is then RE: 307 crankshaft pulley - Steve922 - 11-04-2013 Would this fit a 306 hdi? im on my 2nd now this one has lasted about a year getting fed up of em grr (sorry if its a noob question lol) RE: 307 crankshaft pulley - Poodle - 11-04-2013 Yes, thats the whole idea lol. Re: 307 crankshaft pulley - kentiiboii - 11-04-2013 Yeah they fit the 306. I'll be upgrading mine after my holiday because my air con pump has gone so will be removing it with all new belts pullys and tensioners RE: 307 crankshaft pulley - Steve922 - 11-04-2013 nice think ill get one too, ive been looking at getting rid of the air con too might as well while im there lol thanks for info guys RE: 307 crankshaft pulley - Poodle - 11-04-2013 No probs. The belt you'll need if you remove the aircon is a gates 6pk1175, or any 6-tooth belt that's ~1175mm long. Re: RE: 307 crankshaft pulley - kentiiboii - 11-04-2013 (11-04-2013, 02:38 PM)Poodle Wrote: No probs. The belt you'll need if you remove the aircon is a gates 6pk1175, or any 6-tooth belt that's ~1175mm long. Cheers poodle I was just going to ask aux belt kit for non air con RE: 307 crankshaft pulley - Poodle - 11-04-2013 That's for if you had aircon as standard and have removed it - non-aircon models have a different routing and larger belt size. The ideal solution is to get hold of a setup off a non-ac engine, but they're fairly hard to get hold of. Re: RE: 307 crankshaft pulley - kentiiboii - 11-04-2013 (11-04-2013, 05:56 PM)Poodle Wrote: That's for if you had aircon as standard and have removed it - non-aircon models have a different routing and larger belt size. The ideal solution is to get hold of a setup off a non-ac engine, but they're fairly hard to get hold of. Oh so I just need normal tensioners and the shorter Belt. Wicked RE: 307 crankshaft pulley - Poodle - 12-04-2013 You got it man. |