WHEEL REFURBISHING SERVICE, NEW PARTS ADDED FORUM DISCOUNT - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: For Sale (https://www.306oc.co.uk/forum/forumdisplay.php?fid=26) +--- Forum: Parts (https://www.306oc.co.uk/forum/forumdisplay.php?fid=25) +--- Thread: WHEEL REFURBISHING SERVICE, NEW PARTS ADDED FORUM DISCOUNT (/showthread.php?tid=9361) |
WHEEL REFURBISHING SERVICE, NEW PARTS ADDED FORUM DISCOUNT - Tallguy_2 - 29-12-2012 Hi guys and girls As some of you may know I run a wheel refurbishing service, pretty low key and just a little sideline, I've been doing them ever since I was 10 years old when my Dad used to teach me! I've done a fair few customers sets in the last few months alone and can supply testimonials. I'd like to do this and incorporate some benefit for the forum and its users too, and this is what Scott and I have proposed: Usually I charge from £35 a wheel plus materials however as a benefit to everyone on here I will make a special discount which will be from £25 a wheel plus materials which will also incorporate a £10 donation to 306oc.co.uk for every set done. Process includes blasting and thorough preparation of the surface, two coats of etching primer, surface flatting, four coates of your chosen top coat colour, surface flatting, three coates of catalyst lacquer, surface flatting, compounding and then waxing ready to fit. I do request that tyres are removed, I can carry this out as an extra if required. If people would like cyclones refurbing I have an exchange set in stock so you won't be without a set of wheels for too long! If you would like any further info please don't hesitate to get in touch A few examples of work carried out: RE: WHEEL REFURBISHING SERVICE, FORUM DISCOUNT - the milkman - 29-12-2012 where abouts are you based pal? know afew guys my way after this but dont wanna ship wheels ect :/ RE: WHEEL REFURBISHING SERVICE, FORUM DISCOUNT - Tallguy_2 - 29-12-2012 I'm down near Alton, Hampshire sir, I usually get around a fair bit and I'm pretty happy to wrap and package items for collection RE: WHEEL REFURBISHING SERVICE, FORUM DISCOUNT - the milkman - 29-12-2012 i shall get back to you in the new year may have afew things RE: WHEEL REFURBISHING SERVICE, FORUM DISCOUNT - Strikeforce - 29-12-2012 Why do you have to be so far away lol WHEEL REFURBISHING SERVICE, FORUM DISCOUNT - ash240970 - 30-12-2012 If only you were closer to the midlands RE: WHEEL REFURBISHING SERVICE, FORUM DISCOUNT - Tallguy_2 - 30-12-2012 Couriers are pretty good these days guys! RE: WHEEL REFURBISHING SERVICE, FORUM DISCOUNT - the milkman - 30-12-2012 (30-12-2012, 12:04 AM)Tallguy_2 Wrote: Couriers are pretty good these days guys! not when we gotta pay lol RE: WHEEL REFURBISHING SERVICE, FORUM DISCOUNT - Chris - 30-12-2012 Are these being done with a gun or rattel cans? Deffo need to get my compomotive centres done. RE: WHEEL REFURBISHING SERVICE, FORUM DISCOUNT - Just Sean - 30-12-2012 Hi mate. Can you do pearl effect? RE: WHEEL REFURBISHING SERVICE, FORUM DISCOUNT - Tallguy_2 - 30-12-2012 Compressed air line my friend, rattle cans wouldn't provide an even heavy coat to my satisfaction. I can also arrange powder-coating if preferred Yes, you mean pearlescent? From past experience the effect is lost though and it just looks like something's gone drastically wrong WHEEL REFURBISHING SERVICE, FORUM DISCOUNT - Jonny b - 30-12-2012 How much for a set of 15"s powdercoated bud? RE: WHEEL REFURBISHING SERVICE, FORUM DISCOUNT - Tallguy_2 - 30-12-2012 I'd have to make sure for certain but I'm sure it's around the same price, what use will the wheels get jonny as when it chips that's it, very hart to take bake to an edge. Chip turns to a scab and then the scab turns to a chunk coming off, At least paint can be touched in or worst case repaired WHEEL REFURBISHING SERVICE, FORUM DISCOUNT - Jonny b - 30-12-2012 Road use bud! Iam very carefull with my wheels, can honestly say I have never chipped any yet lol RE: WHEEL REFURBISHING SERVICE, FORUM DISCOUNT - Tallguy_2 - 30-12-2012 I'll have to have a phone about in the new year on that, what colour? WHEEL REFURBISHING SERVICE, FORUM DISCOUNT - Jonny b - 30-12-2012 Bright white please bud! RE: WHEEL REFURBISHING SERVICE, FORUM DISCOUNT - Tallguy_2 - 30-12-2012 Ok mate, I'll make some enquiries next week, you also have PM Re: WHEEL REFURBISHING SERVICE, FORUM DISCOUNT - rocker8742 - 30-12-2012 Might be interested in a couple of months mate WHEEL REFURBISHING SERVICE, FORUM DISCOUNT - kentiiboii - 30-12-2012 Alton as in Alton tower? Not too far. About hour away! WHEEL REFURBISHING SERVICE, FORUM DISCOUNT - ash240970 - 30-12-2012 Kentii - put yer specs on!! It says Alton, Hampshire. RE: WHEEL REFURBISHING SERVICE, FORUM DISCOUNT - Matt - 30-12-2012 Do things other than wheels? If so I may have a few parts for you RE: WHEEL REFURBISHING SERVICE, FORUM DISCOUNT - Tallguy_2 - 30-12-2012 If be willing to have a look matt RE: WHEEL REFURBISHING SERVICE, FORUM DISCOUNT - Matt - 30-12-2012 If you can it would be '6 inlet manifold, fuel rail, cam covers and a strut brace RE: WHEEL REFURBISHING SERVICE, FORUM DISCOUNT - Tallguy_2 - 30-12-2012 I'm sure that would be absolutely fine mate if you want to get them too me RE: WHEEL REFURBISHING SERVICE, FORUM DISCOUNT - Matt - 30-12-2012 That's cool. I could bring them to ace some time. What sort of price am I looking at? Got a few things to sort first RE: WHEEL REFURBISHING SERVICE, FORUM DISCOUNT - Tallguy_2 - 30-12-2012 Bung me a few pics across mate RE: WHEEL REFURBISHING SERVICE, FORUM DISCOUNT - Matt - 30-12-2012 Okay will get some pics after work RE: WHEEL REFURBISHING SERVICE, FORUM DISCOUNT - Just Sean - 30-12-2012 Tall guy I'll pm you a picture later RE: WHEEL REFURBISHING SERVICE, FORUM DISCOUNT - Tallguy_2 - 30-12-2012 Yeah go for it, if you know what colour you want though that's what I'll do! If anyone's intrested I have a set of clones in primer ready for a desired colour of choice. I would take a good straight set as an exchange against them RE: WHEEL REFURBISHING SERVICE, FORUM DISCOUNT - Just Sean - 30-12-2012 Can't get the picture from FBI.but they're satin white with pearl blue flake mixed in. I want mine with yellow pearl flakes... |