+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Photos and Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=20)
+--- Forum: 306 Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=3)
+--- Thread: White Phase 1 DTurbo (/showthread.php?tid=9078)
Pages:
1
2
White Phase 1 DTurbo - Marcus1991 - 19-12-2012
Hi all,
I've got a 3 Door White Phase 1 306 Dturbo.
Had the car for over 2 years now and i've done a few bits and bobs.
-S16 Sideskirts
-Laser Alloys
-S16 Red Fleck half leather interior
-Yellow fog lights
-Done a Bosch Conversion
Over the next few weeks i'll be putting GTI6 brake set up on the front, putting a new Alternator on, Boost gauge and do the usual tuning (finally)
Plans for the next few months, FMIC, HDi gearbox, New front bumper (current one knackered!) and 40mm Lowering and much more.
Ill upload some photos tomorrow, when its light and had a clean!!!
RE: White Phase 1 DTurbo - Mattcheese31 - 19-12-2012
sounds nice . . . . .
RE: White Phase 1 DTurbo - ozonehostile - 19-12-2012
not fair, i wanted a phase 1 three door
but anyway, get some pic up for me to be jealous of haha
RE: White Phase 1 DTurbo - Marcus1991 - 19-12-2012
Hopefully I'll get them up tommorow, going to the scrap yard to get a xantia/405/406 inlet mani and intercooler set up!
RE: White Phase 1 DTurbo - Marcus1991 - 02-01-2013
Ive got some photos taken by my brother, does anyone know how to upload them?
RE: White Phase 1 DTurbo - ozonehostile - 02-01-2013
sign upto photobucket and go from there, once uploaded on there site you just copy and paste the img code into a post on here
RE: White Phase 1 DTurbo - Marcus1991 - 02-01-2013
Thanks for the help ozonehostile!
Ive got a boost gauge sorted now.
Ive got some GTI6 Brakes on the was, aswell as a new front bumper!
![[Image: Side11.jpg]](http://i987.photobucket.com/albums/ae351/karcus1991/Side11.jpg)
![[Image: Front11.jpg]](http://i987.photobucket.com/albums/ae351/karcus1991/Front11.jpg)
![[Image: front22.jpg]](http://i987.photobucket.com/albums/ae351/karcus1991/front22.jpg)
![[Image: Interior22.jpg]](http://i987.photobucket.com/albums/ae351/karcus1991/Interior22.jpg)
![[Image: In11.jpg]](http://i987.photobucket.com/albums/ae351/karcus1991/In11.jpg)
![[Image: head11.jpg]](http://i987.photobucket.com/albums/ae351/karcus1991/head11.jpg)
![[Image: back22.jpg]](http://i987.photobucket.com/albums/ae351/karcus1991/back22.jpg)
![[Image: Back11.jpg]](http://i987.photobucket.com/albums/ae351/karcus1991/Back11.jpg)
![[Image: Engine11.jpg]](http://i987.photobucket.com/albums/ae351/karcus1991/Engine11.jpg)
RE: White Phase 1 DTurbo - ozonehostile - 02-01-2013
sort the rusty bits on the front, lower it, get some white clones on there and your gonna be winning
Re: White Phase 1 DTurbo - Tyronnster - 02-01-2013
Very nice love that interior.
Used to have one in that color but sold it. Then replaced with blue version
RE: White Phase 1 DTurbo - puglove - 02-01-2013
Looks tidy mate, really needs some lows though,
Those seatts are epic, iv got them in my 6 and i think they are the comfyest seats iv ever sat in, they really do hold you to
RE: White Phase 1 DTurbo - Marcus1991 - 02-01-2013
Cheers for the advise guys! I'm thinking of lowering it 40mm all round, do you know of any decent springs to buy?
RE: White Phase 1 DTurbo - puglove - 02-01-2013
I wouldnt, id go 50mm, you will only end up lowering it again , see people doing it all the time
RE: White Phase 1 DTurbo - kingy - 02-01-2013
50/60mm ftw. personaly id say 60.
RE: White Phase 1 DTurbo - puglove - 02-01-2013
top -40mm
bottom about 55mm
RE: White Phase 1 DTurbo - kingy - 02-01-2013
carnt be happy with that
RE: White Phase 1 DTurbo - Piggy - 02-01-2013
dont slam it like all the other planks...30mm is just right.
looks sweet.
Wish I hadnt sold my lazers now. Think Lazers suit the ph1 better than clones
RE: White Phase 1 DTurbo - kingy - 02-01-2013
(02-01-2013, 07:07 PM)Piggy1987 Wrote: dont slam it like all the other planks...30mm is just right.
looks sweet.
Wish I hadnt sold my lazers now. Think Lazers suit the ph1 better than clones
30mm. might as well put some shopping in the boot and get tha same effect.
RE: White Phase 1 DTurbo - puglove - 02-01-2013
(02-01-2013, 07:07 PM)Piggy1987 Wrote: dont slam it like all the other planks...30mm is just right.
looks sweet.
Wish I hadnt sold my lazers now. Think Lazers suit the ph1 better than clones
50/60 mm is hardly slammed
this is slammed
RE: White Phase 1 DTurbo - Marcus1991 - 02-01-2013
(02-01-2013, 07:10 PM)puglove Wrote:(02-01-2013, 07:07 PM)Piggy1987 Wrote: dont slam it like all the other planks...30mm is just right.
looks sweet.
Wish I hadnt sold my lazers now. Think Lazers suit the ph1 better than clones
50/60 mm is hardly slammed
cheers for the PhotoShop! Gives me some encouragement to lower it a bit. The roads I drive to work on are bendy A roads, I want it practical but looking good at the same time, if you know what I mean, in debating between 40-50mm
RE: White Phase 1 DTurbo - puglove - 02-01-2013
Iv had my DT at 50mm for 2 years, and i live in the middle of no where with proper shitty country roads and its never been an issue and thats with a splitter on the front bumper
RE: White Phase 1 DTurbo - kingy - 02-01-2013
defo go for the 50. you wont be sorry. when doing the back i think imo just go a tad lower. just to try and get the car a bit more lower. but thats just me.
RE: White Phase 1 DTurbo - puglove - 02-01-2013
(02-01-2013, 07:20 PM)kingy Wrote: defo go for the 50. you wont be sorry. when doing the back i think imo just go a tad lower. just to try and get the car a bit more lower. but thats just me.
Yeah kingy has a point, if you lower the rear 50mm your going to need like 70 on your rear to level it out,
RE: White Phase 1 DTurbo - Tom - 04-01-2013
Love this car! I'd go 60mm all round maybe a bit more on the back
RE: White Phase 1 DTurbo - Marcus1991 - 04-01-2013
Finnaly got my awful bearing noise sorted out, turns out it was the auxbelt tensioner again! Engine sounds nice and healthy again
RE: White Phase 1 DTurbo - ozonehostile - 04-01-2013
i really want a 3 door, they just look so good in Bianca white
RE: White Phase 1 DTurbo - Marcus1991 - 05-01-2013
(04-01-2013, 10:55 PM)ozonehostile Wrote: i really want a 3 door, they just look so good in Bianca white
I just love the look of Phase 1's in general
Thats a mental set up you have there! A truck turbo, bet that suprises a few people lol
RE: White Phase 1 DTurbo - ozonehostile - 05-01-2013
it certainly does when its on the road yes, but not in my garage like it has been for the last 3 months because i smashed the screen
RE: White Phase 1 DTurbo - Piggy - 05-01-2013
(02-01-2013, 07:10 PM)puglove Wrote:(02-01-2013, 07:07 PM)Piggy1987 Wrote: dont slam it like all the other planks...30mm is just right.
looks sweet.
Wish I hadnt sold my lazers now. Think Lazers suit the ph1 better than clones
50/60 mm is hardly slammed
this is slammed
nah man, thats irish and broken!
when you start getting that low your cambers start getting affected because front arms are at the wrong angle, factor that in with years of not ensure the rack is centred and you get mega crazy bump steer...horrible
White Phase 1 DTurbo - Jukie88 - 05-01-2013
(02-01-2013, 07:10 PM)puglove Wrote:(02-01-2013, 07:07 PM)Piggy1987 Wrote: dont slam it like all the other planks...30mm is just right.
looks sweet.
Wish I hadnt sold my lazers now. Think Lazers suit the ph1 better than clones
50/60 mm is hardly slammed
this is slammed
OMFG that Leon ......yes
RE: White Phase 1 DTurbo - Marcus1991 - 05-01-2013
(05-01-2013, 07:05 AM)ozonehostile Wrote: it certainly does when its on the road yes, but not in my garage like it has been for the last 3 months because i smashed the screen
I promised my self an early night last night, but that didn't go to plan, I started reading your project thread! Haha