+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16)
+--- Forum: XUD Section (https://www.306oc.co.uk/forum/forumdisplay.php?fid=11)
+--- Thread: Wiring help (/showthread.php?tid=8827)
Wiring help - Cbray2003 - 11-12-2012
Can anyone help me I've changed the engine in my d turbo to the d turbo s and the person I had the engine off has cut the loom at the plug by the air box I've rewired all my cables but have 4 red wires left on the main plug and don't know which one goes to which and 2 yellow ones does anyone know how to get round this or wat there for cuz my engine won't start unless I get these wires to the wright place a plug diagram so know wat the pins r for or something along those lines be helpfull last resort is to chance my loom but there's only really 4 wires stopping me cuz the yellow one either one way or other so not worried about that any help much thanks
RE: Wiring help - Oil-burner - 11-12-2012
Please don't tell me you swapped the engine just for dturbo s?
You know there's no difference yeah?
RE: Wiring help - Cbray2003 - 11-12-2012
No I blew my old engine up and that's just wat I got but the lad cut the loom
RE: Wiring help - Dicky - 11-12-2012
Use the loom from your old engine?
RE: Wiring help - Piggy - 11-12-2012
^^^ as above! same engine and loom
RE: Wiring help - Cbray2003 - 11-12-2012
The loom got scraped on the old engine otherwise that's wat I'm thinking might just change the loom not many electrics on a dturbo really
RE: Wiring help - Dicky - 11-12-2012
Well that was silly, never scrap old engines not worth doing for like £30 of scrap.
Best of changing the loom