+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: 306 Repairs & Mods (https://www.306oc.co.uk/forum/forumdisplay.php?fid=22)
+--- Forum: Electrics (https://www.306oc.co.uk/forum/forumdisplay.php?fid=23)
+--- Thread: Airbag clock spring (/showthread.php?tid=8717)
Airbag clock spring - 306Puggy - 08-12-2012
One of the casualties of my heater matrix change has been the airbag clock spring. I mistook part of the disc for a plug and tried to unplug it which resulting in it coming off and all of the tape going everywhere. I was looking at this for a replacement:
http://www.ebay.co.uk/itm/PEUGEOT-306-AIR-BAG-CLOCK-SPRING-AIRBAG-SQUIB-SENSOR-OUR-REF-PEU324-/200859730469?pt=UK_CarsParts_Vehicles_CarParts_SM&fits=Car+Make%3APeugeot%7CModel%3A306&hash=item2ec42c4225
It comes off a V veg I don't know if it will be compatible with the mark 1 airbag ECU or not.
RE: Airbag clock spring - Toms306 - 08-12-2012
I'd imagine it'd be different but can't say for sure. Surely the ph3 uses a 'better' airbag ECU to cope with the extra airbags. Correct me if I'm wrong but theres only one in ph1s isn't there?
There must be a part number on yours though, see if it matches the ebay one. I would think any replacement would have to be reset as well, maybe with PP or something.
RE: Airbag clock spring - Niall - 08-12-2012
doubt it will work. On the ph1s, the airbag controller is actually in the airbag in the steering wheel so i would of thought they are different.
And tom, if the ph1 is anything like the 2/3, the airbag system does a self check every start so doesnt need resetting with PP2000
RE: Airbag clock spring - Toms306 - 08-12-2012
(08-12-2012, 07:07 PM)Niall Wrote: doubt it will work. On the ph1s, the airbag controller is actually in the airbag in the steering wheel so i would of thought they are different.
And tom, if the ph1 is anything like the 2/3, the airbag system does a self check every start so doesnt need resetting with PP2000
Fair enough. I'm trying to use VAG knowledge with Pugs again and failing haha. Got my airbag slip ring/turn angle sensor (combined) on ebay atm and had a few people ask will it work straight off - but it seems it needs to be programmed by VCDS. I assumed Pugs would be the same, my bad.
RE: Airbag clock spring - 306Puggy - 08-12-2012
(08-12-2012, 07:07 PM)Niall Wrote: doubt it will work. On the ph1s, the airbag controller is actually in the airbag in the steering wheel so i would of thought they are different.
And tom, if the ph1 is anything like the 2/3, the airbag system does a self check every start so doesnt need resetting with PP2000
The airbag controller is underneath the centre console on my one
But I have seen some on eBay which seem to be shaped to fit the steering wheel which is weird.Either way the reason I am asking is because from what I can tell the clock spring is just a device to allow the electricity to pass to the airbag in the steering wheel but I wanted to be on the safe side.
RE: Airbag clock spring - Niall - 08-12-2012
Best bet is to check part numbers bud. Could be the same!
RE: Airbag clock spring - 306Puggy - 11-12-2012
Does anyone know for sure or do I have to go on a scrappy raid?
RE: Airbag clock spring - 306Puggy - 14-12-2012
Right, further investigations using servicebox indicate there are two types:
RPO07010
RPO07011
My old one has long been thrown out now so if anyone knows which one is fitted to phase 1 feel free to let me know!
RE: Airbag clock spring - 306Puggy - 20-12-2012
Right, from comparing the squib for the 1996 and the 2000, the only difference seems to be the colour of the plug;
http://www.ebay.co.uk/itm/PEUGEOT-306-MK1-93-96-AIRBAG-ROTARY-COUPLING-SQUIB-9621557680-9623752480-/300806478782?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item4609769bbe
http://www.ebay.co.uk/itm/PEUGEOT-306-AIR-BAG-CLOCK-SPRING-AIRBAG-SQUIB-SENSOR-OUR-REF-PEU324-/200859730469?pt=UK_CarsParts_Vehicles_CarParts_SM&fits=Car+Make%3APeugeot%7CModel%3A306&hash=item2ec42c4225
As you can see, the plug on the 2000 one is brown. But I don't know if the plug design is different or not.