+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16)
+--- Forum: DW10 HDi section (https://www.306oc.co.uk/forum/forumdisplay.php?fid=10)
+--- Thread: hdi cam belt change (/showthread.php?tid=8405)
hdi cam belt change - wibbz - 27-11-2012
can any1 give me some advice i need to do my cam belt an water pump on my hdi just wondering if it a hard job to do and do i need locking pins
RE: hdi cam belt change - Piggy - 27-11-2012
pins for pump and cam pulley are 8mm bolts but you may want to make a locking pin for the flywheel...hole for it behind starter if my memory serves me correctly.
not something you want to try if this is your first attempt ar mechanics but if you follow a manual you will be fine.
RE: hdi cam belt change - Poodle - 28-11-2012
You're thinking of an XUD, Piggy. Very similar on an HDi, but you don't need to lock the pump off.