+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: For Sale (https://www.306oc.co.uk/forum/forumdisplay.php?fid=26)
+--- Forum: Cars (https://www.306oc.co.uk/forum/forumdisplay.php?fid=21)
+--- Thread: 1999 306 3 door hdi moonstone FMIC'ed (140bhp/240ftlb's) (/showthread.php?tid=7854)
1999 306 3 door hdi moonstone FMIC'ed (140bhp/240ftlb's) - Chris_90 - 11-11-2012
1999 306 3 door hdi moonstone
Im just testing water im wanting only no rush to get swap/sell
This is my 1999 306 hdi with 162,000 miles (Going up as using it daily)
Good bits
New Bosh high pressure pump 500miles ago
New water pump 500miles ago
New front disc's and pads 3,000miles ago
New wish bone and drop link (drivers side) 1500miles ago
Oil, Oil filter, Diesel filter @157,500miles
Track rod ends @154,500miles
Tax till end of feb
Mot till July 2013 (aprox)
The car is Front mount intercooled
Brand new digtal boost gauge and pod
Rear tinted windows
New rear brake pads (154,500miles)
Half leather seats
4 air bags
Power steering
Electric windows/sunroof
R/C/L (needs new battery in fob)
New aux belt 1000 miles ago
2 new tyres (not yet fitted but on there way to me)
Probably loads more but will update when i remember
Bad bits
Body work not great a few car park dints, lacquer peel on spoiler
Slight rip in drivers bolster
The clutch is only JUST holding the toque it would really benefit form a clutch upgrade
Think thats every thing will update when if theres anything else
MODS
Tinted windows
Digtal boost gauge
Front mount intercooler
De-Back box
De-cat (empty cat)
K&N Panel filter
Center console painted moonstone
Custom painted boot badge
De-wiper back
Air con removed
The car is still running a 140bhp 240ftlb's toque (aprox) the clutch is only just holding this power have occasional slip in 4th/5th up hill on full throttle it only slips at 2,000rpm will bite agin around 2,500rpm, i think it will re bed in but unsure. The car comes with about £200 worth or remap files i have full toque, launch, egr map, a range of limited toque maps, then 120bhp map and the 140bhp map thats on it now.
The car now has phase 3 bump strips color coded to the car but these are the newest pics i have
![[Image: 306new51.jpg]](http://i552.photobucket.com/albums/jj332/mazda_323f/306new51.jpg)
![[Image: 306new50.jpg]](http://i552.photobucket.com/albums/jj332/mazda_323f/306new50.jpg)
![[Image: 306new43.jpg]](http://i552.photobucket.com/albums/jj332/mazda_323f/306new43.jpg)
Looking for D turbo with bosh or will consider lucus i will be wanting cash my way unless i really like the car. ONLY no petrols will consider cash my way for something lower spec but i have no cash to add to this so please dont ask
Cash price i would be looking for £1500 ovno
Location chesterfield
RE: 1999 306 3 door hdi moonstone FMIC'ed (140bhp/240ftlb's) - Oil-burner - 11-11-2012
Sorry dude but you've not got a chance in hell of getting £1500 for it!
I'm not being a dick or anything just being truthful!
IMHO you'd be lucky to get £900 for it!
RE: 1999 306 3 door hdi moonstone FMIC'ed (140bhp/240ftlb's) - Chris_90 - 11-11-2012
(11-11-2012, 12:19 PM)Oil-burner Wrote: Sorry dude but you've not got a chance in hell of getting £1500 for it!
I'm not being a dick or anything just being truthful!
IMHO you'd be lucky to get £900 for it!
Thats your opinion but thats the price im asking..... wana swap really anyway, if i dont get what im asking/near that i will just d turbo convert it next year
RE: 1999 306 3 door hdi moonstone FMIC'ed (140bhp/240ftlb's) - Oil-burner - 11-11-2012
Like I said I'm not being a dick or anything!
There was a 50k, one owner Hdi that went for similar money on eBay not all that long ago!
Why don't you just get a cheapo dt? I only paid 500 for my 90k dt sedan!
1999 306 3 door hdi moonstone FMIC'ed (140bhp/240ftlb's) - RePT - 11-11-2012
A swap would be your best bet dude, £1500 is a no chance imo. You dont get your money back on mods, and buying already modded cars is boring :p
Good luck in finding your dt, seem to
Be less and less around by the day!
RE: 1999 306 3 door hdi moonstone FMIC'ed (140bhp/240ftlb's) - Chris_90 - 11-11-2012
(11-11-2012, 12:31 PM)Oil-burner Wrote: Like I said I'm not being a dick or anything!
There was a 50k, one owner Hdi that went for similar money on eBay not all that long ago!
Why don't you just get a cheapo dt? I only paid 500 for my 90k dt sedan!
im looking but carnt seem to find any cheap ones..... will see if i get any offers swap wise if not will see what hapens, how i feel right now just wana smash it up lol love french cars
RE: 1999 306 3 door hdi moonstone FMIC'ed (140bhp/240ftlb's) - Oil-burner - 11-11-2012
Why? You've sorted the problems out now haven't you? Just needs a new clutch.
Oh and if you do smash it up could you kick the fmic setup towards claycross
RE: 1999 306 3 door hdi moonstone FMIC'ed (140bhp/240ftlb's) - Chris_90 - 11-11-2012
Lol yer just clutch but pissing me off cos I spent so much was £500 about a week ago on high pressure pump and water pump, before that was £140 garage costs primer pump and genuine fuel filtter, and now clutch..... Carnt justfie spending more on it
RE: 1999 306 3 door hdi moonstone FMIC'ed (140bhp/240ftlb's) - Oil-burner - 11-11-2012
To be fair I would have been in two minds wether to spend £600 on it tbh, I would have been tempted to break it tbh! Like RePt said you'll never see your money back on it!
Couldn't you have got a second hand pump?
RE: 1999 306 3 door hdi moonstone FMIC'ed (140bhp/240ftlb's) - Chris_90 - 11-11-2012
probly but then its a risk could have lasted 2 weeks or 2 years who knows.... if i can source a clutch cheap to hold the toque i will consider keeping it, ive replaced every thing else might as well replace clutch
RE: 1999 306 3 door hdi moonstone FMIC'ed (140bhp/240ftlb's) - Oil-burner - 11-11-2012
Yeah but if you got a second hand one with warranty (deatons will usually give a 30day) it's worth the risk to save £400!
RE: 1999 306 3 door hdi moonstone FMIC'ed (140bhp/240ftlb's) - Chris_90 - 11-11-2012
Oh well bit to late now.....
1999 306 3 door hdi moonstone FMIC'ed (140bhp/240ftlb's) - RePT - 11-11-2012
Personally, i hope to keep my 306 till the shell rusts. By then, ill hopefully be a 306 specialist!
1999 306 3 door hdi moonstone FMIC'ed (140bhp/240ftlb's) - kentiiboii - 11-11-2012
Brand new valeo clutch kit at mine. Still under warranty. Will hold the power.
Yours for £85 collected.
RE: 1999 306 3 door hdi moonstone FMIC'ed (140bhp/240ftlb's) - Chris_90 - 11-11-2012
Thanks but to much for me would rather buy on from motor factors round here at least if any thing was wrong I can take it back and for the sake of £15 extra I would rather do it that way. Thanks,any way
1999 306 3 door hdi moonstone FMIC'ed (140bhp/240ftlb's) - kentiiboii - 11-11-2012
It's a clutch with warranty. What can really go wrong?
RE: 1999 306 3 door hdi moonstone FMIC'ed (140bhp/240ftlb's) - Chris_90 - 12-11-2012
Dont no anything could put it in and it fall to bits and at least if place round corner from me i can just take it back there..... if it was £65 i would think about it, but owt above that i wouldn't risk it..... thanks anyway
1999 306 3 door hdi moonstone FMIC'ed (140bhp/240ftlb's) - kentiiboii - 12-11-2012
Ok chances of it "falling to bits" is very unlikely. But as I say it's a brand new clutch pressure plate and thrush bearing. All valeo from £85 you ain't going to beat that.
RE: 1999 306 3 door hdi moonstone FMIC'ed (140bhp/240ftlb's) - samass - 12-11-2012
*thrust bearing
RE: 1999 306 3 door hdi moonstone FMIC'ed (140bhp/240ftlb's) - Oil-burner - 12-11-2012
Haha nothing worse than a car with thrush! Lol
RE: 1999 306 3 door hdi moonstone FMIC'ed (140bhp/240ftlb's) - samass - 12-11-2012
Maybe Kent is getting confused with his doctor's report?
RE: 1999 306 3 door hdi moonstone FMIC'ed (140bhp/240ftlb's) - Chris_90 - 12-11-2012
LOL
well not really but its still classed as "second hand" if you ask me and after talking to my local place managed to get them down to £92 all in for a new one for the sake of £7 not worth it...... any way lets leave my thread now see if i get any interest in the car (before i deiced to put a clutch in it and keep it that is)
RE: 1999 306 3 door hdi moonstone FMIC'ed (140bhp/240ftlb's) - CJ_Derv - 12-11-2012
Wait till you get a Dturbo then the fun will start lol
And you'll then start buying from a scrap yard as youl replace that much lol
RE: 1999 306 3 door hdi moonstone FMIC'ed (140bhp/240ftlb's) - Arron - 12-11-2012
Your warranty on a standard clutch is irrelevant when your remapping... its bound to start slipping eventually.. standard/OEM clutch is designed for standard/OEM power... it may be able to hold more but its not designed to.. tis why I leaned away from a berlingo clutch
Glwts. If you have receipts for all the work done someone may want to meet you in the middle considering mileage/general condition
RE: 1999 306 3 door hdi moonstone FMIC'ed (140bhp/240ftlb's) - Chris_90 - 12-11-2012
(12-11-2012, 12:18 PM)Arron Wrote: Your warranty on a standard clutch is irrelevant when your remapping... its bound to start slipping eventually.. standard/OEM clutch is designed for standard/OEM power... it may be able to hold more but its not designed to.. tis why I leaned away from a berlingo clutch
Glwts. If you have receipts for all the work done someone may want to meet you in the middle considering mileage/general condition
Im defo considering the berlingo clutch as im not planing to have massive amounts of toque i would be happy with 250-280ftlbs depending on how i get on with the cutting out issue (which i haven't had since i had new pump on) just not sure what to do as really would like a d turbo so i can run on veg....... no idea what to do lol just doing my homework on the berlingo clutch now and going from there.....
RE: 1999 306 3 door hdi moonstone FMIC'ed (140bhp/240ftlb's) - Oil-burner - 12-11-2012
Why don't you put the Hdi back to standard and get rid then?
No point chucking more money at it to get it to stage 2 then getting rid!
RE: 1999 306 3 door hdi moonstone FMIC'ed (140bhp/240ftlb's) - Chris_90 - 12-11-2012
like ive said before i spent so much money on it, its just best if i keep it. i would really like a d turbo but if i end up keeping this i will still be happy.... i gota deiced what i wana do but im now considering the berlingo clutch
RE: 1999 306 3 door hdi moonstone FMIC'ed (140bhp/240ftlb's) - Chris_90 - 13-11-2012
BUMP any one got a nice d turbo to swap??
RE: 1999 306 3 door hdi moonstone FMIC'ed (140bhp/240ftlb's) - ash23 - 13-11-2012
swap for mine haha?
no seriously just keep this mate its nearly there just a clutch away from being there but if you buy a dturbo you will have differet problems all over again .
if you need a hand to fit the clutch im more than happy to help out
RE: 1999 306 3 door hdi moonstone FMIC'ed (140bhp/240ftlb's) - Chris_90 - 13-11-2012
(13-11-2012, 07:01 PM)ash23 Wrote: swap for mine haha?
no seriously just keep this mate its nearly there just a clutch away from being there but if you buy a dturbo you will have differet problems all over again .
if you need a hand to fit the clutch im more than happy to help out
Swap for yours?? Im on my way ;-) lol wouldnt do clutch swap my self/ with help, I once did a saxo vtr clutch took me about 3 days lol and will be alot harder on this, just need to find a clitch that will hold the toque for a long period of time i.e 4-5years, and will feel like a normal clutch to drive. Then I will keep this..... Really dose put a smile on my face the the clutch grips and it just takes off lol