Heating - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: 306 Repairs & Mods (https://www.306oc.co.uk/forum/forumdisplay.php?fid=22) +--- Forum: Electrics (https://www.306oc.co.uk/forum/forumdisplay.php?fid=23) +--- Thread: Heating (/showthread.php?tid=7398) |
Heating - Ben - 26-10-2012 I've got the dash out at the moment for matrix replacement, and thought I'd try and fix my heating at the same time. I thought that the heating temperature control knob would be connected to a mechanical cable, but its not so I guess it must be electrical. Can anyone suggest something I could check to see if the control knob is working? I'm crap with electrics so have no idea. RE: Heating - zx_volcane - 26-10-2012 Its a mechanical cable, maybe its popped off already - sometimes people who have done the heatermatrix in the past can snap off the mounting points for cables and generally break stuff bodge stuff back, which is a right pain when you come to fix it :/ RE: Heating - 1616six - 26-10-2012 It's not a cable Ben, it's sensored, you'll find a small fan type thing in the roof console - probably full of dust! My ph3 has this anyway RE: Heating - WiNgNuTz - 26-10-2012 My Ph3 had a cable...and the fan thing in the ceiling... RE: Heating - Diggers - 26-10-2012 afaik A/C is electric. NON A/C is cable RE: Heating - WiNgNuTz - 26-10-2012 Mine was A/C, and had a cable. Parts bin speacial maybe. Had 1.6 brake setup too, despite it was only a 1.4. RE: Heating - Niall - 27-10-2012 If your heater controls have a 1, 2, 3 and 4 for fan settings, i cant help you. If youve got the 'climate control' where you have a auto setting, its all servo controlled except for the dial that switches where the air is put out from. this is controlled by a yello and green cable. Check the fan on the ceiling is clean and plugged in. If not, could be a faulty servo (hope not.....thats a matrix apart job) or faulty control unit. RE: Heating - Ben - 27-10-2012 Yeah I've got the 'climate control' one so ill check the fan. I've just replaced the matrix and the dash is still out so i shouldn't think it would be too much more work to do the 'matrix apart' bit. Although I would like the car in a couple of days so it'l just depend how long it'l take me. RE: Heating - Ben - 27-10-2012 Just found the fan in the ceiling, why is it there? It's plugged in but not sure how to test it further. Where abouts is the servo, I might try replacing that and then replacing the control unit if that doesn't work.. |