DIY roll cage kit, sorta. - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: For Sale (https://www.306oc.co.uk/forum/forumdisplay.php?fid=26) +--- Forum: Parts (https://www.306oc.co.uk/forum/forumdisplay.php?fid=25) +--- Thread: DIY roll cage kit, sorta. (/showthread.php?tid=7207)

DIY roll cage kit, sorta. - Rippthrough - 21-10-2012 I've got a spare main hoop and two a-pillars bent up in ROPT 550 CDS tube if anyone wants to buy them to make your own cage - you'll still need some straight tubes but at least you'll have all the bent bits ready Hoop is made to fit a none-sunroof car with the headlining removed and should fit close enough for you to stitch weld to the shell/roof to stiffen the car. Ends are left oversize for you to fillet to your other tubes/own car. £150 ono. Just thought I'd see if there was any interest for those of you who don't want to travel/leave the car hours away for weeks and don't have a tube bender at home! I can also do just rear hoops if you want to make yourself a half cage, £55, available in both non sunroof and sunroof versions. RE: DIY roll cage kit, sorta. - Rippthrough - 21-10-2012 Failing that I've a slot either next weekend or the weekend after to do a rear half cage, £375 with single diagonal in the rear or £425 with a full cross inc. fitting. You'd need to leave the car overnight usually. If you absolutely strip it (headlining/rear windows/get the tar soundproofing scraped out of the rear footwells/boot area) before you bring it, then I might be able to turn it around in a day provided you get here early with it RE: DIY roll cage kit, sorta. - darrenjlobb - 21-10-2012 Shame your not in cornwall really RE: DIY roll cage kit, sorta. - Rippthrough - 21-10-2012 Road trip! Besides, you've got a mig, just buy a hoop RE: DIY roll cage kit, sorta. - darrenjlobb - 22-10-2012 Haha road trip in a car with no motor RE: DIY roll cage kit, sorta. - Rippthrough - 22-10-2012 'm sure there's an old tractor laying around down there that could donate a temporary one. RE: DIY roll cage kit, sorta. - Dum-Dum - 22-10-2012 Hmmmmmm, tempting, wish i had the money spare. Is this going to be an ongoing offer? RE: DIY roll cage kit, sorta. - Rippthrough - 22-10-2012 Possibly, but after the next 2-3 weekends I've a job on that'll take 2-3 months so probably won't be able to take much on then. One I did this weekend with the sunroof version of the same hoop, you can just about see where it's stitch welded down the b-pillars. Can even get the headlining in with that one, if wanted: RE: DIY roll cage kit, sorta. - Tallguy_2 - 22-10-2012 Where abouts are you mate? RE: DIY roll cage kit, sorta. - Rippthrough - 22-10-2012 Rotherham