Cyclones with 15mm spacers? - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: 306 Repairs & Mods (https://www.306oc.co.uk/forum/forumdisplay.php?fid=22) +--- Forum: Suspension, Transmission, Handling & Braking (https://www.306oc.co.uk/forum/forumdisplay.php?fid=19) +--- Thread: Cyclones with 15mm spacers? (/showthread.php?tid=7150)

Cyclones with 15mm spacers? - Oil-burner - 19-10-2012 I've bought some 15mm spacers and stud conversions for my aidels but don't have tyres for them yet. I'm doing my disks and pads today and thought I may aswell chuck the spacers and conversions on while I'm at it, but that will mean I'm running at ET4, will I have any scrubbing/clearance issues? Cheers Also has anyone got pics of cyclones with spacers? RE: Cyclones with 15mm spacers? - Pompey306mark - 19-10-2012 Doubt it. I run my borbets which and 16's and wider than cyclones at et0. I did have to roll the rears, but you should get away with it on cyclones. If you want pics, in my project thread I think my orange cyclones were running at et9 or something. RE: Cyclones with 15mm spacers? - Oil-burner - 19-10-2012 I know I'll get away with the rears cos they are really sat into the arch anyway, it's the fronts I'm wondering about tbh, I'm down -40mm and running 195/55's you still think ill be ok? Don't want to risk ruining the arches for the sake of a 15min job. RE: Cyclones with 15mm spacers? - Pompey306mark - 19-10-2012 I don't think you will have a problem. As said I am running bigger and et0. RE: Cyclones with 15mm spacers? - Oil-burner - 19-10-2012 Sound, I'll let you know how I get on! RE: Cyclones with 15mm spacers? - Scott - 19-10-2012 Should be fine. People run 15mm spacers (or 13mm if they buy custom ones) for the Wilwood 4-pot conversion without issues RE: Cyclones with 15mm spacers? - ChezHdi - 19-10-2012 get a pic up with the cyclones on with the spacers! im looking to get some if it makes the back look phat and you have no issues be ideal ;D RE: Cyclones with 15mm spacers? - Pompey306mark - 19-10-2012 Rear with spacer. Front with spacer. RE: Cyclones with 15mm spacers? - ChezHdi - 19-10-2012 I like it, You have any issues with them?? scrubbing or out?? RE: Cyclones with 15mm spacers? - Pompey306mark - 19-10-2012 Had no issues. I know some pull the arches a bit. RE: Cyclones with 15mm spacers? - Oil-burner - 19-10-2012 Nice, I'm only putting them on to save time for when I get some rubber on the aidels. I will post pics when they're on!