+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: 306 Repairs & Mods (https://www.306oc.co.uk/forum/forumdisplay.php?fid=22)
+--- Forum: Electrics (https://www.306oc.co.uk/forum/forumdisplay.php?fid=23)
+--- Thread: ph1 dturbo not starting - urgent help required (/showthread.php?tid=7140)
ph1 dturbo not starting - urgent help required - rickye - 18-10-2012
basicly, car wont start on the key, wiring is abit funny on this car as it is but its never failed to start
when working on it with the car running, i bridged the stop solinoid to the fuel pump, obv stoped the car. Whent to start it again, nothing, dash lite up as normal, heated, but when i went to turn the key it wouldnt turn over.
It used to be when i disconnected the battery and connected it again, the immobaliser flashed the indicators etc, held the button on the side of the steering coloum, indicators switched off and it would start. Now though it flash's the indicators once, so im thinking its something to do with the immobaliser atm
but things got kinda werid on the way home, got 12v to the stop solinoid, bridged the starter and she started, happy days i thought, driving though the town on my way home from my mates, no speedo or temp hand and the stop light was on. thought nothing of it cos of how i started it. Got out of the town, hit full beam, and my speedo started working, as did my temp hand, and the stop light dimmed, never done this untill tonight, so must be related
tried jump leads from engine to chassis incase it was a bad earth, but still no joy, atm im stuck as i dont want to drive it about having to bridge the starter and stall it everytime
anyone any ideas as to what it could be, tried a few fuses but all seem'd ok that i tried(didnt try them all, was late and raining)
RE: ph1 dturbo not starting - urgent help required - rickye - 19-10-2012
got it sorted, was fuse 12 blown, back working like normal again
RE: ph1 dturbo not starting - urgent help required - CJ_Derv - 19-10-2012
Your problem lies in your Original post
i bridged the stop solinoid to the fuel pump, obv stoped the car.
RE: ph1 dturbo not starting - urgent help required - rickye - 19-10-2012
yeh, but the bother was it wouldnt start again lol, its all gd now but, was only a blown fuse
RE: ph1 dturbo not starting - urgent help required - CJ_Derv - 19-10-2012
Exactly my point!! if you bridged the solenoid out onto pump your going to blow the fuse lol
RE: ph1 dturbo not starting - urgent help required - rickye - 19-10-2012
aye, thought that mysel, but alarm n immobliser wasnt going off like normal, had been told bad earth n all, but i either figured fuse or maybe a relay
RE: ph1 dturbo not starting - urgent help required - rickye - 04-11-2012
figured id bring this thread back up
its blowing fuse 12 everytime i turn the key now, fine on the first click, but on second click it blows the fuse
heater light still comes on, as do all my normal warning lights
it stopped as i came off a roundabout last night, just stopped dead, had to bridge the starter to get it going so i could get home
any ideas, i think its a short somewhere in the wiring, but i dont know where to start looking, ive tried the dim dip relay, resistor, reverse light sensor, oil pressure sensor, both big wires off the starter, stop solinoid disconnected, all at the same time and it still blows the fuse, outa ignorance put in a bigger fuse and it blew it straight away aswell
any help appreciated, really frying my head and need the car for work tomorrow