306oc - Peugeot 306 Owners Club & Forum
Is it a 306? A 405? NO!... A Eunos. - Printable Version

+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: General (https://www.306oc.co.uk/forum/forumdisplay.php?fid=6)
+--- Forum: The Couch (https://www.306oc.co.uk/forum/forumdisplay.php?fid=7)
+--- Thread: Is it a 306? A 405? NO!... A Eunos. (/showthread.php?tid=7015)



Is it a 306? A 405? NO!... A Eunos. - Toby - 15-10-2012

With the impending doom of my 306 fast approaching (knackered piston rings/HG/everything), I needed to find something to use in the meantime whilst I fix it.

Found this last night and bought it on an impulse, collected it this morning.

Dan! was right, they are wonderful to drive Smile..

C+C welcome, as always.

[Image: _MG_7894_zps36c49899.jpg]

[Image: _MG_7896_zps44c78360.jpg]

[Image: _MG_7898_zpsee52abdb.jpg]

[Image: _MG_7901_zps79be16a7.jpg]

[Image: _MG_7902_zps486679eb.jpg]

[Image: _MG_7903_zps11af6ae2.jpg]


RE: Is it a 306? A 405? NO!... A Eunos. - bigcheez2k3 - 15-10-2012

Looks good Smile

Needs a beating with the lowering stick though.


RE: Is it a 306? A 405? NO!... A Eunos. - 4WayDiablo - 15-10-2012

(15-10-2012, 11:51 AM)bigcheez2k3 Wrote: Needs a beating with the lowering stick though.

amen to that! properly needs smashing round the face with that stick lol
had it sideways yet?


Is it a 306? A 405? NO!... A Eunos. - THE_Liam - 15-10-2012

Nice! Those rims need binning though, dish required Wink


RE: Is it a 306? A 405? NO!... A Eunos. - C.A.R. - 15-10-2012

Good lad.

Is it a 1.6 or 1.8?

Wish the HDi had heaters as good as a Eunos!


RE: Is it a 306? A 405? NO!... A Eunos. - Ben Jay - 15-10-2012

when it pops can i haz BFO turbo?


RE: Is it a 306? A 405? NO!... A Eunos. - the milkman - 15-10-2012

looks good! should see the matt grey one near mine SERIOUS CAMBER!!!


RE: Is it a 306? A 405? NO!... A Eunos. - Skank_army - 15-10-2012

Needs 40mm drop and clones.


RE: Is it a 306? A 405? NO!... A Eunos. - the milkman - 15-10-2012

(15-10-2012, 12:43 PM)Skank_army Wrote: Needs 40mm drop and clones.

the man speaks truth...........lmao


RE: Is it a 306? A 405? NO!... A Eunos. - Toby - 15-10-2012

Cheers for the feedback guys Smile

It's a mk1 1.6, rolled out the factory in 1990 making it one of the very early ones. I went for the 1.6 because it's only £104 more to insure per year than the 306 Wink

The suspension will be due for an overhaul soon so may certainly look at some decent coilovers and dropping it down a tad more.

Alloys are a bit gay, I tend to loathe anything made by Ripspeed/Halfrauds. They are brand new though so will probably shred through those useless Nankangs within a few weeks ninja


RE: Is it a 306? A 405? NO!... A Eunos. - me-tm - 15-10-2012

I bought this back in August...

[Image: kkeLc.jpg]

[Image: Qm5hP.jpg]

Mk2 1.8 UK-spec MX-5.
This used to have ripspeed wheels on it too, and it didn't have a hardtop.

I still have my old XLdt as a winter car though.

Get yourself registered over at mx5nutz, great community there.


RE: Is it a 306? A 405? NO!... A Eunos. - ginge191 - 15-10-2012

You massive bumder!


RE: Is it a 306? A 405? NO!... A Eunos. - C.A.R. - 15-10-2012

Me-tm - get yourself some of the red reflectors (as found on the back of MK1's) to replace all of your reflectors. Seen it done before and it looks sweet as fook on a red car.


RE: Is it a 306? A 405? NO!... A Eunos. - samass - 15-10-2012

good colour match on that bumper...


RE: Is it a 306? A 405? NO!... A Eunos. - me-tm - 15-10-2012

(15-10-2012, 01:27 PM)c.a.r. Wrote: Me-tm - get yourself some of the red reflectors (as found on the back of MK1's) to replace all of your reflectors. Seen it done before and it looks sweet as fook on a red car.

Aaaah, good idea. Never thought of that. I guess reflectors from a mk1 are the same shape / size then?


RE: Is it a 306? A 405? NO!... A Eunos. - Niall - 15-10-2012

Good does this mean your not going to be on this forum anymore?!


RE: Is it a 306? A 405? NO!... A Eunos. - samass - 15-10-2012

(15-10-2012, 01:39 PM)Niall Wrote: Good does this mean your not going to be on this forum anymore?!

lmao


RE: Is it a 306? A 405? NO!... A Eunos. - C.A.R. - 15-10-2012

Yes mate they are all the same shape, however they are slightly deeper / shallower all round, so they may not fit exactly flush with the bodywork without some washers, but if I can do it anyone can lol.

I had reds at the back and clear ones up front. They lit up with the sidelights too Smile


[Image: IMGP0103-1.jpg]


Is it a 306? A 405? NO!... A Eunos. - THE_Liam - 15-10-2012

Only problem is, they won't drift because there's not enough power to break traction Wink

/troll


RE: Is it a 306? A 405? NO!... A Eunos. - talbotsteve - 15-10-2012

I had this for 6 months 2 years ago, I've had plenty of cars over the years, sunbeam lotus', astra 16v's, Subaru Turbos' ect, but this was and always will be the most fun I ever had in a car!! and the sound was awesome, just needed a bit more umph.
[Image: 210820101717.jpg]
[Image: 220820101730.jpg]


Re: Is it a 306? A 405? NO!... A Eunos. - WiNgNuTz - 15-10-2012

Welcome to 306oc.co.uk, the internets best mx5/eunos owners club. Big Grin


RE: Is it a 306? A 405? NO!... A Eunos. - cwspellowe - 15-10-2012

I had no idea MX5's ever came that high lol


RE: Is it a 306? A 405? NO!... A Eunos. - Toby - 15-10-2012

(15-10-2012, 04:02 PM)cwspellowe Wrote: I had no idea MX5's ever came that high lol

Stock ride height ftw ninja