306oc - Peugeot 306 Owners Club & Forum
Vibration - Printable Version

+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: 306 Repairs & Mods (https://www.306oc.co.uk/forum/forumdisplay.php?fid=22)
+--- Forum: Suspension, Transmission, Handling & Braking (https://www.306oc.co.uk/forum/forumdisplay.php?fid=19)
+--- Thread: Vibration (/showthread.php?tid=632)

Vibration - td_dan - 28-12-2011

well iv recently had a bit of vibration through my pedals so i thought id check the engine mounts 1st finding this

[Image: Photo0091.jpg]

and this

[Image: IMAG0117.jpg]

so after repairing the hole and replacing with the baker BM mount pictured i took it for a drive. Its miles better but still have a little bit of vibration through the pedals so could it be the mount (because i know a few people have said about them) or is there something else worth checking?

Re: Vibration - td_dan - 29-12-2011

any one

Re: Vibration - Matt - 29-12-2011

Uprated mounts can cause vibration, as they are stiffer Smile

Re: Vibration - Connor - 29-12-2011

Matt Wrote:Uprated mounts can cause vibration, as they are stiffer Smile

Twas what I was gonna say

Re: Vibration - puglove - 11-01-2012

Any vibration through the steering wheel?

Re: Vibration - td_dan - 11-01-2012

a little bit. Its mainly on idle

Re: Vibration - D@wson - 11-01-2012

Exactly whats happend to mine... Still not fixed the hole mind.

Re: Vibration - td_dan - 11-01-2012

dawson - iv put the mount in then the big washer underneath with 2 16mm nuts loctited into place it holds but still vibrates when idling

Re: Vibration - D@wson - 11-01-2012

Yeah wait till you here my bodge job.... Welded the washer to the chassis Like a pro. Now its knocking in gear changes and you can here it if you physically rock the engine.

Re: Vibration - D@wson - 13-01-2012

Did you get intouch with the repair kit guy ?

Re: Vibration - td_dan - 13-01-2012

Na mate i phoned bt kept ringin i wil try again. If your on the 6 site try pming him