+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16)
+--- Forum: TU Petrol Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=18)
+--- Thread: A couple of things, need some advice!!! (/showthread.php?tid=618)
A couple of things, need some advice!!! - Foxy-jim - 27-12-2011
Hi all, just have a couple of things that are worrying me on my 306 and wondered if anyone can help.
1) When I accelerate hard in 1st gear sometimes I can feel something clicking through the pedal. Only happens in this gear though no other???
2) Sometimes when idling after a drive, there is a loud ticking noise that sounds as if it is coming from the engine. I press the clutch in and I stops. If I take it off sometimes this stops it others it just carries on.
Any advice with either is much appreciated.
Re: A couple of things, need some advice!!! - THE_Liam - 27-12-2011
1. Possibly a worn gearbox mount causing some movement under heavy load?
2. My money is on a worn clutch release bearing, my Golf did the same thing but the clutch was fine...
Re: A couple of things, need some advice!!! - Foxy-jim - 27-12-2011
Ah wicked. An getting new uprated engine and gearbox mounts in the new year!
The clutch is only a year old, and doesn't make any whining noises like my mates release bearing did?
Re: A couple of things, need some advice!!! - THE_Liam - 27-12-2011
Their all different mate. I'm just guessing it's the release bearing because my Golf did the same, and because the noise goes when you put the clutch in and put pressure on the bearing
Re: A couple of things, need some advice!!! - Niall - 27-12-2011
My skoda does the tappy clutch thing. Turns out its because of the dual mass flywheel. Problem is you don't have a DMF so this post has no real relevance to your question. In fact, it has no real relevance to the 306 whatsoever.
Your welcome
Re: A couple of things, need some advice!!! - Foxy-jim - 27-12-2011
How much is a release bearing and how hard to change?
Thanks Niall haha.
Re: A couple of things, need some advice!!! - THE_Liam - 27-12-2011
You might as well do the whole clutch. A clutch kit is about £80, but it's a big job, need to drop the gearbox. If it's your first clutch change, I'd leave a full weekend to do it
Here's a guide from the Cornish diesel obsessive
http://darrenjlobb.co.uk/projects.php?subj=14
A couple of things, need some advice!!! - Matt - 27-12-2011
Just don't leave it too late, when mine went it shredded the gearbox and the oil had fine bits of metal in, ended up fecking the clutch too. I was quoted £150 to fix it. Should have done that as I ended up paying £700
Re: A couple of things, need some advice!!! - THE_Liam - 27-12-2011
£150 is bloody cheap for a clutch change as well
A couple of things, need some advice!!! - Matt - 27-12-2011
£150 didn't include the clutch change. Was litterally just to fix the bearing, £700 was a gearbox and clutch change
RE: A couple of things, need some advice!!! - declantg - 28-12-2011
Awkward moment when app comments in wrongthread...
Sent from my HD7 T9292 using Board Express
Re: A couple of things, need some advice!!! - Foxy-jim - 28-12-2011
I do not have the money to buy a clutch at the moment haha. Luckily my mate works for Peugeot so I will see what he can do!
A couple of things, need some advice!!! - Matt - 28-12-2011
declantg Wrote:Awkward moment when app comments in wrongthread...
Sent from my HD7 T9292 using Board Express
What comment
Re: A couple of things, need some advice!!! - declantg - 28-12-2011
Matt Wrote:declantg Wrote:Awkward moment when app comments in wrongthread...
Sent from my HD7 T9292 using Board Express
What comment
So was my comment removed, it did it just not post but told me it did aha
Re: A couple of things, need some advice!!! - Toms306 - 30-12-2011
I scrapped a Valeo TU clutch last week!!!!!!!!!
But yeah, does sound very much like the release bearing.
A couple of things, need some advice!!! - Matt - 30-12-2011
declantg Wrote:may have used moderator powers hahaMatt Wrote:declantg Wrote:Awkward moment when app comments in wrongthread...
Sent from my HD7 T9292 using Board Express
What comment
So was my comment removed, it did it just not post but told me it did aha
RE: A couple of things, need some advice!!! - Sinbad - 23-08-2021
(23-08-2021, 07:13 AM)owaisalpha Wrote: I love reading and writing as I am a writer so reading books or articles is an important part of my life and I am providing writing services for the last decade. Get professional dissertation help from UK native experts to boost your grades. We at assignment editors pro have a team of qualified experts that provide the best quality of dissertation writing services to students and academic professionals. Get free consultancy with our experts now to boost your grades.
"I am a writer"
Judging by your grammar, you learned English somewhere sandy, and I don't think it was Camber.
Go and learn the language before spamming forums.
RE: A couple of things, need some advice!!! - Mighty306 - 23-08-2021
(23-08-2021, 03:17 PM)Sinbad Wrote:(23-08-2021, 07:13 AM)owaisalpha Wrote: I love reading and writing as I am a writer so reading books or articles is an important part of my life and I am providing writing services for the last decade. Get professional dissertation help from UK native experts to boost your grades. We at assignment editors pro have a team of qualified experts that provide the best quality of dissertation writing services to students and academic professionals. Get free consultancy with our experts now to boost your grades.
"I am a writer"
Judging by your grammar, you learned English somewhere sandy, and I don't think it was Camber.
Go and learn the language before spamming forums.
The spammers are busy at the moment. Am struggling to keep up with clearing them all. Don't worry though, this one is about to be consigned to oblivion!