+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16)
+--- Forum: XUD Section (https://www.306oc.co.uk/forum/forumdisplay.php?fid=11)
+--- Thread: injectors (/showthread.php?tid=5740)
injectors - pud11 - 22-08-2012
Might sound stupid but are the injectors the same that you use for a lusac and a bosch or are they the same? If different can you use any or doesn't that matter?
RE: injectors - Tom - 22-08-2012
Lucas injectors are different to bosch ones.... With a lucas pump you use lucas injectors.. same with the bosch. if thats what you ment
RE: injectors - Daniel306 - 22-08-2012
A bosch pump will run fine with lucas injectors tho
RE: injectors - pud11 - 22-08-2012
Well I didn't know if the bosch were bigger and if so if you could just connect them to the lucas lines?
RE: injectors - Tom - 23-08-2012
No because i think the firing order is different so you have to use the right lines.. but the injectors can be swapped and changed.. but you should use the right injectors really, for proper running.
RE: injectors - zx_volcane - 23-08-2012
They have different break pressures iirc
RE: injectors - Diggers - 23-08-2012
lucas are 155bar and bosch are 175bar AFAIK
RE: injectors - Ruan - 24-08-2012
The bosch injectors as stated are 175bar, Lucas are 155bar break pressure....
The Bosch injectors will run much better in a Bosch pumped car, don't go swapping between the two - you can run a Bosch on Lucas injectors, it just makes for a shitty running engine since the higher break pressure retards the timing and there's worse atomization. I wouldn't go putting Bosch 175s on a Lucas pump, you're likely to just f*ck the pump... They're pretty weak from the factory.