+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16)
+--- Forum: XUD Section (https://www.306oc.co.uk/forum/forumdisplay.php?fid=11)
+--- Thread: Xud big end bearing torque (/showthread.php?tid=5647)
Xud big end bearing torque - Daniel306 - 18-08-2012
http://306oc.co.uk/forum/attachment.php?aid=1117
This says 50Nm but haynes says 20 + 70 degrees and that seems really tight, what one should i use
RE: Xud big end bearing torque - Dicky - 18-08-2012
Big end bearings are 50, main bearings are 70 according to autodata
RE: Xud big end bearing torque - Tom - 18-08-2012
I have an autodata book.. I will look and report back
Edit, i looked but couldnt find it
sorry
RE: Xud big end bearing torque - Ruan - 19-08-2012
Only difference being that manual is for an XUD9A... Not an XUD9TE...
Though I'd rather go off that manual - the fact it says 70* says it's thinking in stretch bolts, which rod bolts aren't lol...
RE: Xud big end bearing torque - Dave - 19-08-2012
I do mine 20 + 70. Feels about right when doing it.