+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: 306 Repairs & Mods (https://www.306oc.co.uk/forum/forumdisplay.php?fid=22)
+--- Forum: Interior, Exterior, ICE (https://www.306oc.co.uk/forum/forumdisplay.php?fid=12)
+--- Thread: Lion (/showthread.php?tid=5602)
Lion - bowers - 16-08-2012
Taken my bonnet badge off, want to spray it all black and the lion green, can
I take the lion off so it's not messy? Tried lever it off with a knife but it just isn't happening.
RE: Lion - cpikey316_ - 16-08-2012
Its bolted on. Theres just one nut to take off I think.
Open the bonnet and look underneath the badge.
Lion - bowers - 16-08-2012
I've taken that off. Just want to take the silver bit off the actual badge to paint it
Re: Lion - kernow_joe - 16-08-2012
Is glued on I did the same as with head lights stick it in the oven, lightly prised it out with a Stanley blade
Lion - kentiiboii - 16-08-2012
Ok gareth7 he knows.
RE: Lion - Matt - 16-08-2012
I just pulled mine apart, it's glued and pinned.
RE: Lion - 4WayDiablo - 16-08-2012
Yeah as matt :-) just pulled it off. Might break it though lol
RE: Lion - kernow_joe - 16-08-2012
yeah thats why I heated mine up, not sure if it made a difference or not
RE: Lion - Eeyore - 16-08-2012
i heated mine and drilled out the sprews and still broke it. Id suggest just masking it off. I did that on mine and its a really impressive job seeing as it took 15 minutes!
RE: Lion - gareth7 - 17-08-2012
Use a drill......very carefully.......10 second job
RE: Lion - kernow_joe - 17-08-2012
don't be a heavy handed twat and heat it and gently lever under each point that its held, easy to see from the back where the fixing points are, then you can do a proper job of it, same goes for the surround
Lion - bowers - 18-08-2012
Just sprayed it all black was too much of a ball ache hahaha