![]() |
Turbo oil feeds re gauging interest! - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: For Sale (https://www.306oc.co.uk/forum/forumdisplay.php?fid=26) +--- Forum: Parts (https://www.306oc.co.uk/forum/forumdisplay.php?fid=25) +--- Thread: Turbo oil feeds re gauging interest! (/showthread.php?tid=5595) |
Turbo oil feeds re gauging interest! - Jenkosowls - 16-08-2012 Updated 05/10/12 The MK1 oil feed as il call it is designed to bolt to the original oil line to which all you have to do is bend it out of the way bolt on and forget. Currently only a k14 oil line has been developed with this although iirc the t2 lines are same fitting possibly others if any one can confirm this. i currently have this setup on a T25 with no issues at all and can acces the line through the wheel arch so is handy! You get 1x High Pressure Braided Oil Line 1x Banjo Union Bolt 2x Copper washer Pics ![]() ![]() ![]() ![]() ![]() ![]() Fitting option 1 ![]() ![]() ![]() ![]() Mk2 Mk2 is designed to replace the whole line for new so plug and play straight forward. and will fit all blocks. this line is much easier to route around areas and line up. ![]() Prices Mk1 price is £25.00 plus paypal fee unless by gift posted recorded first class for peace of mind. On made to order basis only with a maximum 2 day turn around usually within the same day except weekends Mk2 The price will be £36.00 plus paypal fee unless by gift posted 1st class recorded but this does include a surcharge of £5 for the old block union break down of surcharge is £2.50 for the union and £2.50 first class recorded so in reallity the line cost just £31.00 as i pay for the union and you to post! Which is £8 more than the mk1 this is due to the new 8mm pipe being flared and bent and compression fitting and extra length of hose. Although this may well become cheaper as the hose length is over sized at the moment Any info or interest contact me via pm RE: TD04/T25 High Pressure braided Oil Feeds - Rippthrough - 16-08-2012 ^^The firm does the lines for the buggy and all the 4wd racers we've built, always been fantastic quality tbh. RE: TD04/T25 High Pressure braided Oil Feeds - Ricky - 16-08-2012 I will take a mk1 for td04 ![]() RE: TD04/T25 High Pressure braided Oil Feeds - HDIkyle - 16-08-2012 Which version have you done mine by? RE: TD04/T25 High Pressure braided Oil Feeds - Jenkosowls - 16-08-2012 (16-08-2012, 05:27 PM)HDIkyle Wrote: Which version have you done mine by? Mk1 kyle Mk2 im yet to sort as apparently the connection into the block is a "funny" fitting RE: TD04/T25 High Pressure braided Oil Feeds - Rippthrough - 16-08-2012 (16-08-2012, 05:27 PM)HDIkyle Wrote: Which version have you done mine by? Sticky back plastic and toilet rolls. RE: TD04/T25 High Pressure braided Oil Feeds - Mattcheese31 - 16-08-2012 whoop . . . .this shit is getting real easy . . ![]() RE: TD04/T25 High Pressure braided Oil Feeds - HDIkyle - 16-08-2012 (16-08-2012, 05:31 PM)Rippthrough Wrote:(16-08-2012, 05:27 PM)HDIkyle Wrote: Which version have you done mine by? Can i use duct tape as i like the black stealth look? RE: TD04/T25 High Pressure braided Oil Feeds - Jenkosowls - 16-08-2012 1st line sold! Being sent tomorrow afternoon 1st class Recorded any one else after any get the orders in tonight for dispatch tomorrow! RE: TD04/T25 High Pressure braided Oil Feeds - londondan86 - 16-08-2012 Did it get confirmed that the fittings are the same between the turbos? Cash waiting if so RE: TD04/T25 High Pressure braided Oil Feeds - Jenkosowls - 16-08-2012 (16-08-2012, 07:21 PM)londondan86 Wrote: Did it get confirmed that the fittings are the same between the turbos? Cash waiting if so hasnt been confirmed yet but im just about to put a thread up about it RE: TD04/T25 High Pressure braided Oil Feeds - CJ_Derv - 16-08-2012 not a bad setup that i had a hose made with a compression fittin an cut the pipe just after first bend out of block Good price too as i paid £30 RE: TD04/T25 High Pressure braided Oil Feeds - cwspellowe - 16-08-2012 Must.. not.. spend.. more.... RE: TD04/T25 High Pressure braided Oil Feeds - CJ_Derv - 16-08-2012 (16-08-2012, 09:02 PM)cwspellowe Wrote: Must.. not.. spend.. more.... haha so your ordering plates of me and this hose ![]() RE: TD04/T25 High Pressure braided Oil Feeds - td_dan - 16-08-2012 jenks send me your paypal ![]() RE: TD04/T25 High Pressure braided Oil Feeds - Jenkosowls - 16-08-2012 according to service box it only list one part number for the turbo oil feed for 4 turbos if people could pm me there chasis numbers for a Ko3 Gt15 and T2 il see what it shows up then RE: TD04/T25 High Pressure braided Oil Feeds - cwspellowe - 16-08-2012 I need a turbo before I get all this lot though! RE: TD04/T25 High Pressure braided Oil Feeds - CJ_Derv - 16-08-2012 (16-08-2012, 09:24 PM)cwspellowe Wrote: I need a turbo before I get all this lot though! if you got this lot youd soon have a turbo in no time ![]() RE: TD04/T25 High Pressure braided Oil Feeds - dturbopeck - 16-08-2012 mmmmmmmmm, am going to get made homeless if i buy 1, shes already taken my credit card off me, so if you guys can hel p me and buy some bits off the car am breaking, she will never no! well until she drives the pug and crashes it, TD04/T25 High Pressure braided Oil Feeds - Jake - 16-08-2012 Anyone that doesn't have a big turbo by the end of the month has no excuse now. Plates and oil lines available this easy ! RE: TD04/T25 High Pressure braided Oil Feeds - Jenkosowls - 16-08-2012 It's been confirmed the k14 and T2 share the same oil union nut just the k14 uses an adaptor. Still waiting on the remaing 2 now RE: TD04/T25 High Pressure braided Oil Feeds - londondan86 - 17-08-2012 Ok mate, want! Payment details please, ill pay tonight! RE: TD04/T25 High Pressure braided Oil Feeds - td_dan - 18-08-2012 received today excellent quality and fast delivery thanks mate RE: TD04/T25 High Pressure braided Oil Feeds - HDIkyle - 18-08-2012 Got mine today also. Personally hand delivered ![]() ![]() RE: TD04/T25 High Pressure braided Oil Feeds - Jenkosowls - 19-08-2012 I'm glad the first few that have been sent have been received! Any problems get in touch! I may need to increase the 2 day turn around as the supplier has said there running low in stock towards the weekends! But so far all so far have been dispatched within 24 hours and some delivered within 48 hours of receipt of money! Can't complain! Cheers for those who have orders so far mk2 line is also looking promising RE: TD04/T25 High Pressure braided Oil Feeds - Ricky - 21-08-2012 Mine turned up yesterday also. Cheers bud. RE: TD04/T25 High Pressure braided Oil Feeds - CJ_Derv - 21-08-2012 Just wondering what size is the banjo bolt hole on the side as im using the standard ine and yours looks slightly bigger and im worried mine isnt big enough or am i just worrying too much it seems to be fine but jus dont want to starve the turbo of oil i should be purchasing one of your kits soon too as i would rather have a braided kit ![]() RE: TD04/T25 High Pressure braided Oil Feeds - londondan86 - 23-08-2012 Received this morning mate. Top quality part and very good service. Thanks RE: TD04/T25 High Pressure braided Oil Feeds - Jenkosowls - 11-09-2012 Order going in Friday if any one wants one. Mk2 on hold atm due to no real interest on any of the lines except those that have been sold cant afford to hold stock! RE: TD04/T25 High Pressure braided Oil Feeds - Mattcheese31 - 11-09-2012 well i'll want one for a tdo4 when the adaptor plates get made up, the mk 2 version would be nice . . ![]() |