+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: 306 Repairs & Mods (https://www.306oc.co.uk/forum/forumdisplay.php?fid=22)
+--- Forum: Interior, Exterior, ICE (https://www.306oc.co.uk/forum/forumdisplay.php?fid=12)
+--- Thread: passenger airbag removal (/showthread.php?tid=5572)
passenger airbag removal - Jarrus - 15-08-2012
Want to remove the air bag system, i know how to remove all the bits except the passenger air bag,
Also when its out id like to replace the airbag 'lid' with the top glovebox lid if its possible,
Any advice would be much appreciated
Cheers
Brett
Its a 1998 phase 2 1.9dt
RE: passenger airbag removal - HDIkyle - 15-08-2012
Theres a level you have to pull out behind the HU that will release the airbag, then lift it out, theres 2 triangle bolts holding a plate over the plug, Undo and unplug then just fit the top glovebox it just screws in.
Remove bulb and done. Might be worth also turning it off first with the key slot but i never did and i drove around for months without one
RE: passenger airbag removal - Jarrus - 16-08-2012
Cheers mate, a lever you ment? Never seen it and had the head unit out loads of times, not that I don't believe you.... I take it that it's on the left?
Daft question, what does it look like? is it a different colour?
RE: passenger airbag removal - HDIkyle - 17-08-2012
Its just a flat bit you might need to turn it to be able to pull it
Ye a lever not a level whoops
Think its just a brass colour
RE: passenger airbag removal - Jarrus - 17-08-2012
ill have a look