• Universal 2.25 intercooler kit from ebay
  
• C5 hdi 110 bottom pipe
  
• An assortment of 2.5 and 2.25 pipes, some rubber 90 degree reducers too and about about 4 2.5 inch straight rubber joins
  
• the pipe needed to come down off the turbo
  
• a 'box' of 406hdi rubber bends and straights
  

(10-08-2012, 10:15 AM)Midnightclub Wrote: Sean he's on about the ally inlet elbow from the 406, also you'll need a 41mm (IIRC) long legged 90 degree silicon to go from the lower C5 pipe to the turbo mine cost about £7 from an eBay shop. Also a 406 110 HDi top rubber pipe is fairly useful too

(10-08-2012, 10:26 AM)Midnightclub Wrote: You could... but the bay looks a lot more OEM and is a straight fit to the 406 inlet, you'll need to make some brackets yourself for the cooler to bolt too then obviously bolt them to the car. You NEED that 406 elbow too, can't do your FMIC without it so make sure you get one before you start

Yeah that eBay link is the same one that i bought: http://www.ebay.co.uk/itm/41mm-90-Degree-Elbow-Silicone-Hose-3-PLY-BLUE-/270417706510?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item3ef626be0e#ht_1117wt_876

(10-08-2012, 10:22 AM)sean-306 Wrote: PS; This is the c5 pipe i bought

How does the FMIC Attach to the car btw?

(10-08-2012, 10:33 AM)Poodle Wrote:

(10-08-2012, 10:22 AM)sean-306 Wrote: PS; This is the c5 pipe i bought

How does the FMIC Attach to the car btw?

That's not what people mean by "C5 lower pipe" mate, you're looking for a solid plastic one, goes under the sump/g'box. You'll need to attach the FMIC to the car with brackets. I explained this in your other thread, you might have a bit more luck if take notice of the advice you've asked for.

And as midnightclub says; you need the 406 inlet elbow, bodging something on would be messy and might not work properly.

(10-08-2012, 10:47 AM)Midnightclub Wrote: Alternatively you could buy the 406 110 HDi lower pipe and it'll fit straight on without the need for another silicon

(10-08-2012, 10:52 AM)Midnightclub Wrote: correctomundo, it doesn't flow quite as well but tbh.. i don't think you'd notice the difference

(10-08-2012, 10:54 AM)Poodle Wrote: No problem fella, I know i come across as a bit of a pompous twat sometimes, but i do mean to help really lol. Tbh i did kind of jump to the conclusion you were the kind of noob that asked the same question three times, which is obviously unfair, so my own apologies for that. Kiss and make up?


EDIT: That's the wrong one again matey, give me a sec.

(10-08-2012, 11:00 AM)sean-306 Wrote: I did think that! Fwends? x