+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: General (https://www.306oc.co.uk/forum/forumdisplay.php?fid=6)
+--- Forum: The Couch (https://www.306oc.co.uk/forum/forumdisplay.php?fid=7)
+--- Thread: Ed's GTi-6 (/showthread.php?tid=4989)
Ed's GTi-6 - Scott - 18-07-2012
I forgot to upload this when I took it a few weeks ago, just found it in my dropbox
http://www.youtube.com/watch?v=Q8lsWJKQivA
RE: Ed's GTi-6 - Andy - 18-07-2012
Bit tappy isn't it??
RE: Ed's GTi-6 - Niall - 18-07-2012
(18-07-2012, 09:50 PM)Andy Wrote: Bit tappy isn't it??
In all fairness it's not too tappy. I've heard it's a feature of the ph4 that the cambelts were left loose from the factory resulting in tapping after a few miles.
RE: Ed's GTi-6 - Ruan - 18-07-2012
In seriousness, that is tapping...
That's not injector ticking, because you can hear it only on a few valves...
RE: Ed's GTi-6 - Andy - 18-07-2012
(18-07-2012, 09:51 PM)Niall Wrote:(18-07-2012, 09:50 PM)Andy Wrote: Bit tappy isn't it??
In all fairness it's not too tappy. I've heard it's a feature of the ph4 that the cambelts were left loose from the factory resulting in tapping after a few miles.
Pahahaha flol !!!
RE: Ed's GTi-6 - Niall - 18-07-2012
(18-07-2012, 09:53 PM)Ruan Wrote: In seriousness, that is tapping...
That's not injector ticking, because you can hear it only on a few valves...
I know...it's fooked. I was scared to rev it. Made some funky noises when you held it at revs.
RE: Ed's GTi-6 - Ruan - 18-07-2012
Though saying that, it could be a f*cked tappet in fairness... It's not a metallic enough noise IMO for it to be a proper tapper...
RE: Ed's GTi-6 - Niall - 18-07-2012
(18-07-2012, 09:55 PM)Ruan Wrote: Though saying that, it could be a f*cked tappet in fairness... It's not a metallic enough noise IMO for it to be a proper tapper...
Actually not a bad shout. Mine sounded like that after I started it after being left on stands on one side for ages
RE: Ed's GTi-6 - Ruan - 18-07-2012
But then it begs the question, why is a tappet f*cked...
Usually oil starvation of some variety...
Ed needs to get his old engine in, it was a sweet engine in fairness, it pulled the best of any '6 I've been in for standard...
RE: Ed's GTi-6 - Dum-Dum - 18-07-2012
Whats that spare wiring plug supposed to be attached too, (you can just about see it lurking in the darkness)
Defo sounds tappy though.
Ed's GTi-6 - kentiiboii - 18-07-2012
Diesels sound less tappy
RE: Ed's GTi-6 - strictly_perv - 19-07-2012
People should click on the video and read the one of the comments
RE: Ed's GTi-6 - darrenjlobb - 19-07-2012
Rofl.
RE: Ed's GTi-6 - Ed Doe - 19-07-2012
Oh FFS!!!!
The most annoying thing about this thread is I can't watch the video at work, so assumed it was a video of my car's engine. This made me majorly panicked after reading Ruan's comments.
I had to breathe into a paper back for 1 minute. True Story.
Ruan, it's hard to tell exactly, but I'm pretty sure the new one pulls just as well. It deffos needs an oil and filters change, and I'll be able to give it hell a lot more once the cooler's been fitted too.
Either way, that's why I'm keeping my spare engine; it was a known good un, and I fully plan on doing something mad with it over the course of next year!
RE: Ed's GTi-6 - Chris - 19-07-2012
Have been waiting for someone to put this up.
RE: Ed's GTi-6 - samass - 19-07-2012
Ed's gunna get a shock when he actually hears the video...
RE: Ed's GTi-6 - Dum-Dum - 19-07-2012
(19-07-2012, 11:00 AM)Ed Doe Wrote: Either way, that's why I'm keeping my spare engine; it was a known TAPPER, and I fully plan on doing something mad with it over the course of next year!
EFA mate.
RE: Ed's GTi-6 - puglove - 19-07-2012
OOOOO dear Ed looks like your going to have to do a little swapy , good exscue to rip the astor engine down and forg it
RE: Ed's GTi-6 - Ed Doe - 19-07-2012
Or just forge the Diablo engine....
RE: Ed's GTi-6 - Grant - 19-07-2012
LMFAO
Ed, i love you and your tappy paranoia!
Forgot you took this video scott, well played for uploading it
RE: Ed's GTi-6 - puglove - 20-07-2012
(19-07-2012, 05:24 PM)Ed Doe Wrote: Or just forge the Diablo engine....
groupe buy
RE: Ed's GTi-6 - THE_Liam - 20-07-2012
More tap than a branch of Homebase
