![]() |
Indicator help - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: 306 Repairs & Mods (https://www.306oc.co.uk/forum/forumdisplay.php?fid=22) +--- Forum: Electrics (https://www.306oc.co.uk/forum/forumdisplay.php?fid=23) +--- Thread: Indicator help (/showthread.php?tid=4504) |
Indicator help - Jackabeen - 27-06-2012 AlriGht just been on my way to work and my indicators have decided to sto stop working ![]() RE: Indicator help - WiNgNuTz - 27-06-2012 (27-06-2012, 05:28 PM)Jackabeen Wrote: AlriGht just been on my way to work and my indicators have decided to sto stop working Your indicators are made of blue cheese?!?! ![]() ![]() On a more serious note, what phase is your car? I believe fuseboxes differ between phases, i know the one in my ph2 is different to the one i had in my ph3... RE: Indicator help - Jackabeen - 27-06-2012 Lol predictive shite I ment cheers lol its a phase one Anyone? RE: Indicator help - WiNgNuTz - 27-06-2012 http://www.peugeotlogic.com/fuses/fuses306/fuselist7.htm See if that helps you at all? RE: Indicator help - Jackabeen - 27-06-2012 Cheers I'll investigate RE: Indicator help - WiNgNuTz - 27-06-2012 Is it just the indicators that arent working? Do the interior lights work? RE: Indicator help - Jackabeen - 27-06-2012 The lights on the speedo thing ? Then no but when I put headlights on the dials light up I'm unsure about the ones near the sun roof I'm unsure about it if that's the one you mean I haven't checked RE: Indicator help - WiNgNuTz - 27-06-2012 Yeah the interior lights that are above your head, in your case near the sunroof, and possibly in the back too. If they dont work, and neither do the map reading lights, or the buzzer that sounds when you open the door with the headlights on, then its most likely the fuse, as they are all on the same circuit according to that chart i linked you to. F30 if that helps. RE: Indicator help - Jackabeen - 27-06-2012 Cheers I'll try it on my break and report back RE: Indicator help - Jackabeen - 27-06-2012 Right iv changed the fuse it was blown but still no luck anyone else had any issues like this ? RE: Indicator help - WiNgNuTz - 27-06-2012 Has the same fuse blown again after youve replaced it? If it has, id say theres a short somewhere thats overloading the circuit... RE: Indicator help - tdbadger1980 - 28-06-2012 Check the hazard light switch if that's come disconnected u wont have indicators and it could possible be causing the fuse to blow as well. RE: Indicator help - WiNgNuTz - 28-06-2012 (28-06-2012, 02:12 PM)tdbadger1980 Wrote: Check the hazard light switch if that's come disconnected u wont have indicators and it could possible be causing the fuse to blow as well. Good call that one, i had the same issue when i was swapping stuff over from my 1.4 to my DT, took the hazard switch out of the 1.4, but got called away to pikc the missus up before refitting it in my DT AFTER having aken the old one out.....then wondered why i couldnt indicate anywhere! ![]() RE: Indicator help - Jackabeen - 28-06-2012 I'm sure I commented on this last night :S it's all sorted now was some wires to the wing indicator that were shorting out , cheers for all the help ![]() |