+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: For Sale (https://www.306oc.co.uk/forum/forumdisplay.php?fid=26)
+--- Forum: Misc & Wanted (https://www.306oc.co.uk/forum/forumdisplay.php?fid=14)
+--- Thread: Wanted: K14 turbo or complete turbo and manifold for 1.9td (/showthread.php?tid=4307)
K14 turbo or complete turbo and manifold for 1.9td - Fozzy - 19-06-2012
Im starting to think the turbo oil seals may have gone on the hot side so looking for a cheap known good turbo to swap and see if this sorts the problem.
What you got, collection would be better to avoid postage but i know not eveery one will live near me but i can collect from south south east .
Thanks
RE: K14 turbo or complete turbo and manifold for 1.9td - ginge191 - 19-06-2012
i've got a whole K14 turbo setup on a manifold and ready to go.
Initially thought the turbo was bust, so changed it for a K03, turned out to be a leaking exhaust fire ring.
But downsize was what i was after - can check shaft play (giggidy) and photograph blades etc. if you like.
I can also, get the turbo to portsmouth/southampton - would be cheaper than postage.
RE: K14 turbo or complete turbo and manifold for 1.9td - samass - 20-06-2012
ginge iirc the play in your shaft was fine, and the blades weren't damaged, just thought i'd chuck that in
RE: K14 turbo or complete turbo and manifold for 1.9td - mark_airey - 20-06-2012
I have a Bare K14 too with no manifold or exhaust elbow but they are easy enough to swap over
RE: K14 turbo or complete turbo and manifold for 1.9td - Fozzy - 20-06-2012
What are the prices you are after?
RE: K14 turbo or complete turbo and manifold for 1.9td - sweeney1987 - 20-06-2012
inlet mani on k14 and t2 is same if theyre off a 306
RE: K14 turbo or complete turbo and manifold for 1.9td - ginge191 - 20-06-2012
(20-06-2012, 09:13 AM)Fozzy Wrote: What are the prices you are after?
pm your way