+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: For Sale (https://www.306oc.co.uk/forum/forumdisplay.php?fid=26)
+--- Forum: Parts (https://www.306oc.co.uk/forum/forumdisplay.php?fid=25)
+--- Thread: MIG welder Clarke 90EN gas/gas-less (/showthread.php?tid=3966)
MIG welder Clarke 90EN gas/gas-less - cully - 06-06-2012
edited
Re: parts forsale collection only FCS or Cullompton Devon - cully - 06-06-2012
MIG welder Clarke 90EN gas/gas-less with regulator new spool 0.6 wire shroud and 0.6 tip NO GAS!
set up for gas welding
30-90amp welds 3-4mm thickness
easy to convert with a spool of fluxed wire and the correct size tip
has odd side panel as it got lost made a new one.
fitted with wheels and a drag handle 90's didn't have this
wire feed rollers need a little clean but works OK
£100
Re: parts forsale collection only FCS or Cullompton Devon - Pompey306mark - 06-06-2012
Really want the white needles. But I hate taking that part or the car apart.
Though it is easier now as my wheel
Comes off with just 6 screws.
Hmmm
Re: parts forsale collection only FCS or Cullompton Devon - Grant - 06-06-2012
You open to offers on the welder mate?
Re: parts forsale collection only FCS or Cullompton Devon - Kimmie - 06-06-2012
^^
As soon as I saw the word 'welder' I wondered how long it would take you or Niall!
Re: parts forsale collection only FCS or Cullompton Devon - cully - 06-06-2012
not taking offers yet as its only been listed for an hour
http://www.machinemart.co.uk/shop/produ ... mig-welder
Re: parts forsale collection only FCS or Cullompton Devon - Niall - 06-06-2012
Kimmie Wrote:^^
As soon as I saw the word 'welder' I wondered how long it would take you or Niall!
Welder? Me? I don't want a welder. I want a gas axe. Or a air compressor so I can make noises like they do in the pits on F1 and pretend I'm a racing driver..............
Re: parts forsale collection only FCS or Cullompton Devon - Connor - 06-06-2012
Pompey306mark Wrote:Really want the white needles. But I hate taking that part or the car apart.
Though it is easier now as my wheel
Comes off with just 6 screws.
Hmmm
Steering wheel doesn't need to come apart, going camping? Ill fit them for you there, will take 15mins
Also cully will you split the silver dash? I don't want all of it lol
Re: parts forsale collection only FCS or Cullompton Devon - Pompey306mark - 06-06-2012
It a pain to get the cover off the front with standard steering wheel in the way. Plus I have a smaller wheel now so should be easier.
I am camping but not getting there til Saturday most likely.
Re: parts forsale collection only FCS or Cullompton Devon - Poodle - 06-06-2012
Hmmmm, welder.... :think:
Re: parts forsale collection only FCS or Cullompton Devon - Grant - 06-06-2012
£80 and a cheeky reach around for the welder. Where do you live? I could possibly collect....
And Kim, what makes you think I desperately new a welder for something that cannot be spoken about?
Re: parts forsale collection only FCS or Cullompton Devon - gareth7 - 06-06-2012
If you end up splitting the centre facia I'll take the vents and anything else that's left over at FCS if that's ok Cully
Re: parts forsale collection only FCS or Cullompton Devon - Connor - 06-06-2012
Its the vents i want gareth
and Mark its piss easy getting the clocks out with the standard steering wheel, and ill be there Saturday as well, so can do it then if you want?
Re: parts forsale collection only FCS or Cullompton Devon - cully - 06-06-2012
Grant Wrote:£80 and a cheeky reach around for the welder. Where do you live? I could possibly collect....
£90 without gas or £100 with a New bottle of gas?
and as per the title where i live
prefer not to split connor as it can be used as a set for painting
Re: parts forsale collection only FCS or Cullompton Devon - gareth7 - 06-06-2012
If you'd rather not split I'll take the lot Cully.......sorry Connor
Re: parts forsale collection only FCS or Cullompton Devon - Pompey306mark - 06-06-2012
I will most likely take the needles. Give me something fun to do Saturday when I arrive.
Re: parts forsale collection only FCS or Cullompton Devon - cully - 06-06-2012
Pompey306mark Wrote:I will most likely take the needles. Give me something fun to do Saturday when I arrive.
remember to bring a couple of teaspoons then
Re: parts forsale collection only FCS or Cullompton Devon - Connor - 06-06-2012
Don't need teaspoons lol I worked out a really easy way of getting them off, just forgot to mark them first
Re: parts forsale collection only FCS or Cullompton Devon - cully - 09-06-2012
any more interest?
Re: parts forsale collection only FCS or Cullompton Devon - cully - 11-06-2012
back to the top
RE: MIG welder Clarke 90EN gas/gas-less - cully - 11-09-2013
bumpedybump
am taking offers on this for coombe delivery
please bear in mind this hasn't been used in 12months so wire guides may need cleaning
i know I'm not going to get £100
£50 is more realistic
RE: MIG welder Clarke 90EN gas/gas-less - Jonny81191 - 11-09-2013
I'll give you 50
RE: MIG welder Clarke 90EN gas/gas-less - cully - 11-09-2013
grants called dibs until payday and he's collecting
sorry jonny second in line m8
RE: MIG welder Clarke 90EN gas/gas-less - Jonny81191 - 11-09-2013
Ah ffs