Connecting car stereo controls with aftermarket stereo - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: 306 Repairs & Mods (https://www.306oc.co.uk/forum/forumdisplay.php?fid=22) +--- Forum: Electrics (https://www.306oc.co.uk/forum/forumdisplay.php?fid=23) +--- Thread: Connecting car stereo controls with aftermarket stereo (/showthread.php?tid=37013) |
Connecting car stereo controls with aftermarket stereo - andrej.pilipovic - 23-08-2018 Hi guys, I was wondering is it possible to connect factory installed volume controls on steering wheel with aftermarket car stereo. Is there to buy some kind of adapters or wires have to be rearranged? Sent from my moto g(6) play using Tapatalk RE: Connecting car stereo controls with aftermarket stereo - Eeyore - 23-08-2018 yeh there are adapters you can buy but they have always been a bit flakey as they are manufacturer/model specific. good luck! Most people just remove the stalk. Connecting car stereo controls with aftermarket stereo - andrej.pilipovic - 23-08-2018 Thanks! My mechanic wants 80€ for adapter, but I found Peugeot/Citroen adapter in Germany for 17€.... Here are the photos of adapters ... Sent from my moto g(6) play using Tapatalk RE: Connecting car stereo controls with aftermarket stereo - dyo - 07-10-2018 I was one of the few ones to keep chasing up a stalk adaptor. It's not always easy as Peugeot fitted different type of adapter with the different phases. Mine is a phase 3, but the stalk connector is of a phase 2. Whatever they had on the shelves. After trying 3 different adapters (they all claimed to be the correct one) this is the one I ended up with autoleads PC99-X19 and a fascia panel adapter FP-04-01: https://www.dynamicsounds.co.uk/autoleads-pc99-x19-peugeot-206-306-stalk-steering-wheel-adaptor.html mine connects to a pioneer head unit, so choose the correct one from the drop down menu. RE: Connecting car stereo controls with aftermarket stereo - Magenta Sunset - 07-10-2018 when I have the time, i'm going to convert my radio stalk into a switch for a foghorn. |