Dave's Euro-ish moonstone, return of the banded steels.

Dave's Euro-ish moonstone, return of the banded steels. - Printable Version

+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Photos and Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=20)
+--- Forum: 306 Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=3)
+--- Thread: Dave's Euro-ish moonstone, return of the banded steels. (/showthread.php?tid=3678)

Pages: 1 2 3 4 5

Dave's Euro-ish moonstone, return of the banded steels. - Dave26 - 24-05-2012

I've had my pug for a few months now so I thought I'd get a project thread up. It's still mostly plans until I change insurance companies in a couple of weeks, so bear with me.

Here it is when I first got it home:

[Image: P1030158.jpg]

The first thing to do was get a set of cyclones, which I then got refurbed by Dervpower (Chris) from .net, he did a fantastic job and I'd recommend anyone in the North West wanting paint work done to go and see him!

[Image: P1010435.jpg]

I then bought a '6 splitter and spoiler, which look exactly like a '6 splitter and spoiler, so I won't bore you with pics. Chris will be painting the spoiler, front and rear peugeot badges, and the black parts of the wingmirrors to match the cyclones. I'm also thinking about getting vinyl for the strip on the doors to match too.

I also got a set of wind deflectors for cheap, as one of them had snapped. A bit of super glue and crossed fingers later and they look like this:

[Image: P1010431.jpg]

Not perfect but ok for the price I paid! It actually doesn't look as bad as it does in that first picture!

And here it is after a very quick wash, as really it was far too sunny and hot:

[Image: P1010427-1.jpg]

Cyclones will probably go on this week if I get chance.

I can't wait to rip that scabby rear badge off, it winds me up everytime I see it. Also will be debadging the sides and the rear hdi and peugeot lettering at some point.

I'm picking up a half leather interior on Saturday to replace the rather disgusting grey one I've got in at the moment. I've also chucked in a set of rubber mats that my dad had in his HDI estate from new years ago, again no pics but how interesting can mats be?

Once my insurance is sorted (looking like it'll be with Brentacre, gave me a cracking quote!) it'll be lowered 60mm front and back (already sourced shocks and springs, just need to find someone local to do the rear), full exhaust system (probably straight through) and stage 1 map.

Re: Dave's moonstone HDI. - 4WayDiablo - 24-05-2012

Looks very clean and tidy! Top work. The clones look mint

Re: Dave's moonstone HDI. - mark_airey - 24-05-2012

Looks good does that and Chris is a good lad Wink

Dave's moonstone HDI. - Matt - 24-05-2012

Dervs work is cracking. Wanted to get him to do my car, but was an epic drive!
Cars looking good mate Smile

Re: Dave's moonstone HDI. - Dave26 - 26-05-2012

Cyclones are on, not without issue! Broke two socket sets and yet 1 of the steels still wouldn't come off! A quick trip to quik fit and this is the result:

[Image: f625bf44.jpg]

Re: Dave's moonstone HDI. - WiNgNuTz - 26-05-2012

Those clones look good against the Manstain, sorry Moonstone.....any idea what colour they are?

Looks like a nice tidy example mate, any other plans for it?

Re: Dave's moonstone HDI. - tim 306td - 27-05-2012

looking good mate dervpower does a sweet job i wouldnt use anyone else. a pick of my old one
[Image: 247187_1560453389914_1792706551_984245_2015602_n1.jpg]

[Image: 247187_1560453389914_1792706551_984245_2015602_n1.jpg]

Re: Dave's moonstone HDI. - Dave26 - 28-05-2012

Cheers guys, it's coming along.

WiNgNuTz Wrote:Those clones look good against the Manstain, sorry Moonstone.....any idea what colour they are?

Looks like a nice tidy example mate, any other plans for it?

Cheers mate, they're Ford Magnum Grey. Plans are all in the first post, plus I've sourced a set of crystals to mask too.

tim 306td Wrote:looking good mate dervpower does a sweet job i wouldnt use anyone else. a pick of my old one

Cheers mate. Aye he does! Lovely looking car, how come you got rid? We'll need to have a mini meet up some time with derv and a few others.

Re: Dave's moonstone HDI. - tim 306td - 29-05-2012

thanks mate i have a white 306 dturbo now Big Grin

yeah a mini meet sounds good :dance:

Re: Dave's moonstone HDI. - Dave26 - 08-06-2012

tim 306td Wrote:thanks mate i have a white 306 dturbo now yeah a mini meet sounds good :dance:

Nice one

Right, stage 1 remap done! Big thanks to Pro Steve for the quick service and useful info, fantastic! Not had chance to test it just yet, off to work soon though, never looked forward to a drive to work so much! Looking forward to getting the straight through exhaust on on Sunday too! I've fitted a half leather interior, I'll get some pics when it's in Chris' unit on Sunday. Also need to fit the '6 splitter. Anyone know anyone in the North West who does torsion bar lowering and could fit my front shocks/springs?

Re: Dave's moonstone HDI. - tim 306td - 08-06-2012

it makes a diference with the map dosnt it! you lowering 60mm?

Re: Dave's moonstone HDI. - Dave26 - 08-06-2012

tim 306td Wrote:it makes a diference with the map dosnt it! you lowering 60mm?

Certainly does mate! Aye that's the plan, soon I hope, it's a bit tractor like at the moment!

Re: Dave's moonstone HDI. - tim 306td - 08-06-2012

get an intercooler on it bud when i put mine on it fealt more perky!

Re: Dave's moonstone HDI. - Dave26 - 14-06-2012

Bit of an update folks. The car drives much better with the remap, very happy with it!

Went and got my rather pikey exhaust system fitted on Sunday, decat and de-midbox.
[Image: 0bbe819c-1.jpg]

Was going to put on a midbox that i'd got with the system, to use as a backbox, but it wasn't long enough and didn't clear the bumper. So i'm currently using the original backbox which will obviously restrict the system, so I'm looking for a free flowing backbox with a nice rolled tip!

I also fitted my gti splitter on Sunday, but I haven't got a pic. I'm going to give her a good clean later today and get some decent pics!

On Tuesday I spent a while going from this:

[Image: P1010496.jpg]

and this:

to this:

I also removed the badges next to the side repeaters, to find one had been stuck on with super glue :/ Sadly the badges on both side took laquer with them when they came off Sad

My rear badge is a bit of a mess:

[Image: P1010498.jpg]

I was planning on just replacing it with a colour coded one, but I'm leaning towards a smoothed boot as there are rust spots on my boot anyway!

I've got a set of roof bars waiting to go on, just need to get the bolts for them, and a spoiler waiting to be painted. My spare room is now full of car bits, exhaust, interior, roof bars, general bits and bobs, the girlfriend is really impressed Wink

It's really screaming out to be lowered now, so I need to find someone who can do it in the North-West.

All thoughts welcome!

RE: Dave's moonstone HDI. - Dave26 - 15-06-2012

Gave her a good wash, clay and polish yesterday. Was just starting to wax and it started to rain, bloody typical! I've chucked the roof bars on without screws, just to see how they look. Managed to get a few decent photos, let me know what you think! I'm looking for someone to lower it, it's crying out for it I think!

[Image: P1030683.jpg]

RE: Dave's moonstone HDI. - Dave26 - 03-07-2012

Right, there've been a fair few changes since the last time I updated this!

First of all were the gloss black and anthracite front and rear badges from Gareth7:

[Image: P1030706.jpg]

Then I went to see Chris (Dervpower) to get my backbox fitted. It's just a universal one from ebay which, it turned out, was far too short to fit my system. Chris managed to fabricate a join to connect the system and backbox and welded it up for me, absolute hero! Feels much nippier now I've got rid of the standard backbox, looks better and sounds rather nice!

Then it was off to RickyP to have her lowered, I was sick of driving a tractor! I had bought 60mm springs and front and rear shocks from Chris so the plan was to lower it 60mm front and back. Got the front lowered and it turned out it was a fair bit lower than 60mm, so I got Ricky to lower the rear 65mm. The rear still sits higher than the front, but although it would look better lower, it would probably cause my exhaust system to be ripped off as it sits quite low! Looks much better low imo, Ricky did a fantastic job and is a really sound guy, couldn't recommend him enough (also makes a decent brew!).

Just given her a quick wash and finally got the roof bars fixed on so took a few quick photos! The overall aim is leaning down the Euro route, although obviously the car is nowhere near "Euro" currently. My wheels and tyres are currently up for sale in the for sale section as I'm after something nice and wide instead! Any feedback would be great!

This is less than a weeks build up, smokey!!!
[Image: P1030701.jpg]

RE: Dave's moonstone HDI. - Dave26 - 06-07-2012

Got some new wheels, need a good clean and polish but should look good!

[Image: 1e7f814d.jpg]

RE: Dave's moonstone HDI. - tim 306td - 06-07-2012

imo i dont like them i loved the cyclones but each to there own

RE: Dave's moonstone HDI. - Dum-Dum - 06-07-2012

How wide are they

RE: Dave's moonstone HDI. - Dave26 - 06-07-2012

(06-07-2012, 07:01 PM)tim 306td Wrote: imo i dont like them i loved the cyclones but each to there own

The cyclones are great, just fancied a change! Like you say mate, each to their own Smile

(06-07-2012, 07:15 PM)Dum-Dum Wrote: How wide are they

They're 8J mate.

RE: Dave's moonstone HDI. - Tom - 06-07-2012

Banded steels always win! Get em on there dude Big Grin

RE: Dave's moonstone HDI. - Dave26 - 08-07-2012

Right, went to see Chris (Dervpower) for him to roll my arches, and I've now finally got the banded steels on! Here are a few pics of the process:

[Image: P1030715.jpg]

And then we had a little photoshoot, apologies for the state of my car, it was a spur of the moment shoot! All thoughts welcome!

[Image: P1030733.jpg]

RE: Dave's moonstone HDI. - kingy - 09-07-2012

wheels look shite. i think you should take them off straight away........

and sell em me.

RE: Dave's moonstone HDI. - Tom - 09-07-2012

That looks shit hot mate Big Grin

RE: Dave's moonstone HDI. - Kezzieboy - 09-07-2012

Wheels look chuffing epic buddy!

Dave's moonstone HDI. - kentiiboii - 09-07-2012

Are they the spare wheel you get when you have alloys?

And look very nice. Love the colour Smile

RE: Dave's moonstone HDI. - Kezzieboy - 09-07-2012

Yeah, they're the same as what I used for winter wheels, and what my spare is (or at least was, when it was fitted Tongue

)

Dave's moonstone HDI. - kentiiboii - 09-07-2012

Yeah thought they looked fimiular. They looks awesome as a deep dish Smile

RE: Dave's moonstone HDI. - kingy - 09-07-2012

i still say that these look like space savers. aint got no holes.

edit.... oops, my bad. yes they have, just seen them.

RE: Dave's moonstone HDI. - Poodle - 09-07-2012

Really like those! Looks tidy mate, nice work.