Plastic brake pipe clips - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: 306 Repairs & Mods (https://www.306oc.co.uk/forum/forumdisplay.php?fid=22) +--- Forum: Suspension, Transmission, Handling & Braking (https://www.306oc.co.uk/forum/forumdisplay.php?fid=19) +--- Thread: Plastic brake pipe clips (/showthread.php?tid=36719) |
Plastic brake pipe clips - Mighty306 - 04-04-2018 When the weather finally improves & the garage dries out I'm hoping to clean up the rear underside of the car. In a few places there's corrosion under/close to the plastic securing clips for the brake lines. Can these be removed without destroying them and then reused? Thanks. RE: Plastic brake pipe clips - C2K - 12-04-2018 They're the push pin to spread three leg type iirc as some f*ck nugget had broken them all on my rallye. I can't recall if you can see the back of the clips on the boot floor but if you can you can push the centre pin back through. RE: Plastic brake pipe clips - Ben_w - 12-04-2018 Yes, you can access the ones above the rear beam from the boot floor. As said, there is a pin to push to get them out. They can be pretty stiff but I used a punch to push the pins. RE: Plastic brake pipe clips - Mighty306 - 12-04-2018 Cheers guys, that's really helpful to know. |