Breaking gti6 turbo SOLD SOLD SOLD - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: For Sale (https://www.306oc.co.uk/forum/forumdisplay.php?fid=26) +--- Forum: Parts (https://www.306oc.co.uk/forum/forumdisplay.php?fid=25) +--- Thread: Breaking gti6 turbo SOLD SOLD SOLD (/showthread.php?tid=36205) |
Breaking gti6 turbo SOLD SOLD SOLD - fatlapit - 12-08-2017 Well here goes BREAKING PEUGEOT 306 GTI6 TURBO. now this isnt a bitch fight it isnt a discussion between people. Its a list of stuff for sale at a fair price and it is fair. As soon as the engine and gearbox sells either as a package or induvidually the rest will also be for sale. So. Engine and gearbox package. 8K Fully forged turbo charged 2046cc low comp engine. Spoox time attack spec gearbox with 3j lsd and 205 1900 cwp. Full boost circuit including ic and dv and boost controller. Full water circuit including rad and hard pipe kit. Full 3" exhaust system circa 89-92db. Full wiring complete with fuses and relays and ecu etc. Helix paddle clutch complete. All the engine mounts. Full fuel system including 044 swirl pot fpr fuel filter etc. Oil circuit with sandwich plate and cooler and hoses. All the guages which are all stack. Afr boost and egt. Carbon rocker cover Basically anything to make the car drive. There is a load more that i can add. If intrested pm me. I can break it down into an 5k engine 3k gearbox package but i would need a buyer for each package. Suspension Front Bc racing coil overs with baker bm top mounts 18mm hubs and gen wishbones with vibra technic p bushes £450 Rear Bc racing dampers solid mounts and beam consisting of bridgcraft arms o toe and neg 3 camber 30mm arb and 24mm torsion bars £650 Brakes Front Tarox 10 pots 330 discs will come with braided lines £900 Rear Standard calipers wavy discs and new ds2500 also will include braided lines £200 Tilton lever bias valve £50 Wheels 17" Oz leggenda x4 in black with nearly new ad08r £750 17" oz superturismo gt (i think) in black with avon zzr fronts and khumo v70 on rear £400 Body and bits Bare shell with light loom cage and harness bar seat mounts carbon drivers foot well carbon flap inserts £300 Corsa epas conversion £200 Doors with carbon door cards and carbon door handles manual window winders £100 each Fire ectinguisher system including hand held and fixed as per msa spec £100 Brian james twin axke tilt trailer with all the straps etc £1200 LIKE I SAID LOADS AND LOADS THERES EVEN MORE THAT I WILL GET PICS UP OF. Serious posts only please Breaking gti6 turbo - bashbarnard - 12-08-2017 We will keep the thread tidy if anything breaks out for you dont worry. The only thing i ask is a picture or two please as per the rules. Good luck with the sale Sent from my iPhone using Tapatalk RE: Breaking gti6 turbo - fatlapit - 12-08-2017 I tried bash i cant get the pictures small enough. Unless i can send some to you then u could do it. Breaking gti6 turbo - bashbarnard - 12-08-2017 There are some programs out there man to do so. Everyone else manages it to sell things on here. Sent from my iPhone using Tapatalk RE: Breaking gti6 turbo - Ben - 12-08-2017 What cage is in the shell? And is it a sunroof model or not? RE: Breaking gti6 turbo - fatlapit - 12-08-2017 Non sunroof with a 6 point omp Heres 1 pic Another God knows why u cant see the full picture. Forums are always a pita for pictures RE: Breaking gti6 turbo - Ben - 12-08-2017 Weld in cage? Can only see the edge of those photos, possibly because I'm on my phone though RE: Breaking gti6 turbo - fatlapit - 12-08-2017 (12-08-2017, 09:09 PM)Ben Wrote: Weld in cage? Can only see the edge of those photos, possibly because I'm on my phone though Yes weld in dude RE: Breaking gti6 turbo - Poodle - 14-08-2017 Ben, tap and hold then select open image in new tab. RE: Breaking gti6 turbo - RA306 - 14-08-2017 Impressive stuff RE: Breaking gti6 turbo - Ben - 16-08-2017 Cheers Alex didn't know you could do that. No longer interested in the shell I'm afraid I've decided its too much hassle. RE: Breaking gti6 turbo - fatlapit - 16-08-2017 Its ok dude im trying to sell whole anyway RE: Breaking gti6 turbo - Blandy - 17-08-2017 If it did go as far as completely breaking I'd be interested in Bare shell with light loom cage and harness bar seat mounts carbon drivers foot well carbon flap inserts £300 Corsa epas conversion £200 Doors with carbon door cards and carbon door handles manual window winders £100 each RE: Breaking gti6 turbo - fatlapit - 20-08-2017 Ok blandy RE: Breaking gti6 turbo - fatlapit - 22-08-2017 (17-08-2017, 08:40 PM)Blandy Wrote: If it did go as far as completely breaking I'd be interested in Hi blandy thia will be broken so when its its rwady i will pm you RE: Breaking gti6 turbo - Blandy - 29-08-2017 No problem - do you have any old suspension as just noticed all the suspension etc is being sold so guessing getting it loaded on a trailer will prove difficult lol Guessing the suspension is sold? RE: Breaking gti6 turbo - fatlapit - 30-08-2017 Nope nothing dude. Ill weld up a frame with castors that the shell can sit on. To get it on a trailer RE: Breaking gti6 turbo - Blandy - 30-08-2017 has the suspension been sold? RE: Breaking gti6 turbo - fatlapit - 30-08-2017 Yeah man Well i say yes the guy hasnt paid me for the rear yet RE: Breaking gti6 turbo - Blandy - 30-08-2017 Bugger that was my next question as would be interested |